VENKATA SAI PRASANTH CHALLURI

Email:adc7x5@r.postjobfree.com

Phone:+91-834*******

PASSPORT NO: R2786019

OBJECTIVE

Highly motivated and professionally trained ELECTRICAL ENGINEER with extensive experience and practicum seeks a position within the industry where specialized skills and abilities may be used to contribute experience with business development project management and problem solving, able to travel and relocate.

PROFISSIONAL PROFILE:

Having 5 years of experience ELECTRICAL COMMISSIONING, TESTING,MAINTENANCE & PROJECTS, LP panels, Distribution panels, OIL & INDUCTION furnaces, PLC & VFD and their Maintenances.

Engineering & design: plans, coordinates and supervises daily engineering functions, diagnoses and resolves engineering and design issue. Calibrates and installs equipment, modifies designs manages quality control and warrantee issues. possesses outstanding analytical.

Technical support: provides comprehensive support to electrical & electronics installation and testing expertise, offers to complete the construction and maintenance system.

SKILLS:

Re-designs MS project (PM),MS office suite and AutoCAD(CAD).

Equipment : variable frequency drives (VFD) Programmable logic controller (PLC), Electrical panels and Temperature controller, Motion control, sensors.

Customer management skills,safety awareness, compliances and adaptability.

Equipment design, application engineering and support.

Vendor management /conflict Management.

Team building/ Leader ship.

PROFESSIONAL EXPERIENCE:

ELECTRICAL COMMISSIONING ENGINEER Arabi Company W.L.L

Kuwait.

1Year & 3Months.

Operation and maintenance of VARIABLE FREQUENCY DRIVES

Trouble shootings of VARIABLE FREQUENCY DRIVES

Design and cabling duplex & triplex control panels

Onsite inspection and trouble shooting

Control panel trouble shooting & repair

Creating electrical schematic using ELECTRICAL CAD SOFTWARE

Independently prepare& modification of spec, drawings &calculation

Documentation design using CAD SOFTWARE

Trouble shooting of PLC like SIEMENS logo basic & advanced modules

Installation and maintenance instruments like pressure transmitter, transducer, pressure switches, thermocouples, temperature controllers, limit-switches, proximity sensors, solenoid coils, etc.

ELECTRICAL ENGINEER Synergies Castings Limited.

3 Years 4Months.

Performed in-depth electrical acceptance testing in hardware,including in continuity & high potential testing.

performed load calculation for sizing wire & circuit protection.

Conduct in-depth analysis of data analyses, testing and design the load as per the requirement.

Good understand in electrical drawings, planning of projects, erection & maintenance.

Thorough knowledge of distribution and utilization of power and cable layout.

Monitoring all types of voltage fluctuations and improving power factor.

Conducting energy audits.

FOUNDRY : ALLOY WHEELS CASTING

Troubleshooting of induction motors and variable frequency drives, HMI operations and there maintenances.

Experience in INDUCTION MELTING furnace and DIESEL MELTING furnace maintenance.

Installation and maintenance of Electrical components like pressure switches, thermocouples,

temperature controllers, limit-switches, proximity sensors, solenoid coils etc.

supervision of maintenance departments ETP and RO plants.

Familiarity of Programmable logic controller(PLC), Variable frequency drives (VFD),ladder logic and functional block programming.

Working Knowledge in Siemens S7-200, S7-300, PLC controller Version 4.0

Knowledge and troubleshooting experience of HT/LT Motors, MCC Panels, HT/LT Switchgears, AC Drives, EOT Cranes, HT/ LT Cable Work, Electrical Luminaries & Different types of Elect. Instruments

SWITCH GEAR(33KV) SUBSTATION:

ERECTION AND COMMISSIONING OF 33 KV OUTDOOR SUBSTATION

Transformer Installation / Testing / Commissioning.

2.5MVA, 33 KV/415V three phase transformer.

50Hz ONM outdoor type Transformer 33kV/415v.

Single Phase outdoor and indoor Current Transformer.

Preventive maintenance of ACB, VCB, ISOLATERS & PROTECTIVE RELAYS.

Maintaining the plant power factor as 0.99pf .

VCB INSTALLATION / TESTING / COMMISSIONING

Installation Commissioning of Testing and 33 KV vacuum circuit breaker.

Installation or Repair or Testing or Commissioning of RTCC Panel.

Installation Testing and Commissioning Indoor and outdoor CRP up to 33KV.

Erection, installation, testing, commissioning of a SCADA, panel control cable.

Ducting and a connection of 33kvVCB, isolator, transformer marshalling box.

CRP & relay panels RTCC panel with SCADA operating.

KEY PROJECTS HANDLED

AUTOMATED WHEEL PLANT

Handling of electrical as per requirement

Load Estimation and planning of power & control cables.

Calibrated of the temperature controller & sensor.

Providing capacitor banks for maintain power factor (0.99lag).

Handling of electrical load as per requirement.

Estimation and planning of power cables.

To co-ordinate with Electrical Contractor for Electrification, Execution, Erection & Commissioning.

Operation and maintenance of diesel of generator

+sets having a capacity of 1500KVA,380KVA etc.

Thorough knowledge of trouble shooting the variant problems occurring in compressors reciprocating & screw type like KIRLOSKAR 160 & 75, INGERSOLL 75,160 & also providing services & troubleshooting for plc & hard weird wiring.

Knowledge and troubleshooting experience of Instrumentations like RTD, Limit-Switches, Transmitters, Pneumatic Valves, Load cells, Level Switches etc.

Commissioning of FANUC robot 2000ib 165F, FANUC robot 2000ic 165F

Programming the robot as FANUC 2000ib standards.

Maintain and provide safety interlocks to robots.

Providing preventive & periodic maintenance to the robot.

Commissioning of power & control wiring as per drawing.

Providing sensor to robot & conveyor for interlocking system.

NEW CHROME PLATING PLANT

Erection and commissioning of Panel boards, transporters, filter pumps, stirrer motors, Rectifiers, water chillers, cooling tower.

Erection and commissioning of switch gear room PMCC, MCC, MLDB, panel boards.

Erection and commissioning of cable trays for power and control cables laying.

Following with OMRAN PLC programmer for correct plant process operation and implementation of safety precautions.

Single line drawing of switch gear using AUTO CAD-ELECTRICAL.

Breakdown maintenance and continuous improvement activities of Electrical & Instrumentation.

Identifying & maintaining critical spare & updating records as per the audit requirements.

Updating Daily break down data’s.

Handle all activities of Operation & Good record as shift in charge.

Responsible for maintaining the checklists and relevant documents as per TS 16949.

Implementing PTW/LOTO System at Plant.

Improved the safety environment in the entire plant.

Well versed with Windows based applications, internet usage.

An effective communicator with excellent relationship, management skills and strong analytical, problem solving and organizational abilities

Preventive & Breakdown maintenance of ACB/VCB, HT/LT Panels, Switchgears, Lighting Systems, Hydraulic Valves, Different types of Instruments like Flow Miters, Encoder, ZSS, PCS, BSS etc.; Gear boxes Scoop Couplings and continuous improvement activities.

Instrumentation & Control

Installation of temperature controllers & pressure controllers.

Programming and wiring for PID, energy meters.

Control wiring and troubleshooting of VFD’S.

Maintaining critical spares for control equipment.

Relay Pre –commissioning & commissioning of EI&C systems.

Startup of compressors stations and generators

ELECTRICAL TESTING ENGINEER MVK TRANSFORMERS.

Present

Testing and troubleshooting of Transformers up to 3000 KVA, 33 KV Class.

We are using different kind of testing like,Turns Ratio test,HV& LV winding resistance test .

No load –Full load test of the transformer,Magnetic balance & Vector group test.

Insulation resistance test (megger test), Break down voltage Test (BDV).

Separate source voltage test, induced over voltage test (D.V.D.F).

Cable Testing like 3C 185 sqmm A2 CEFY 19/33KV(E) .

Testing like partial Discharge test, Bending test, Insulation resistance test, High POT test (76 kv) & Flammability Tests.

COMPUTER PROFICIENCY

Proficiency in the AUTO CAD, ACAD(electrical).

Proficiency in the entire MS OFFICE, MS WORD, MS EXCEL, MS POWER POINT .

Good understanding of INTERNET TOOLS.

Well versed in WINDOWS XP, WINDOWS 7, WINDOWS10.

Experienced graphic artist well-versed in ADOBE PHOTOSHOP, Illustrator, and Sketch

.

ACADEMICS

Bachelor of Technology in 2013.

Specialization- Electrical & Electronics Engineering from the Gokul institute of technology and sciences.

Intermediate in 2009.

From AMMA High School in 2007.

Personal Details

Father’s Name : CH.SANKARARAO

Date Of Birth. : 29-FEB-1992

Marital status : Single

Languages know : English,,Hindi,Telugu, Tamil, Arabic.

Address : kamakshi watch works, main road, kasimkota,visakhapatnam,AP

Contact this candidate