Power Plant Water Treatment
Resume:
Engr. Frederick de Leon Bago
RME License No. 0052865
No.4 Murphy Street Green Heights Village San Isidro, Paranaque, Metro Manila
Cell Phone: 094*-*******
Email: *********@*****.***
Age: 45
Birth: October 24, 1974
Status: Married
Weight: 150Lbs
Height: 5’5
EDUCATION
YR 1992-1997 MAPUA INSTITUTE OF TECHNOLOGY
Bachelor of Science in Mechanical Engineering May 1997 YR 1988-1992 SAINT ANDREWS’ SCHOOL OF PARANAQUE
High School Diploma, March 1992
YR 1982-1988 SAINT ANDREWS’ SCHOOL OF PARANAQUE
Grade School Diploma, March 1988
WORK EXPERIENCE
JUNE 1998 – NOVEMBER 1999
NIPPON SHEET GLASS PHILIPPINES INC. ( NSGP)
111 East Main Ave. SEPZ Laguna Technopark Binan, Laguna Job Title: Maintenance Engineer
Duties and Responsibilities:
- Production and Facilities machine and equipment Preventive Maintenance
- Proper operations and monitoring of facilities machine and equipment’s such as Power plant generating facilities, waste water treatment, water treatment ( demineralization process), boiler, compressor, pumps, clean rooms,
- Troubleshoots Mechanical and Electrical problems NOVEMBER 1999- AUGUST 2000
B.A.S.F. PHILS, INC.
Road 5, Phase 1 CIP-1 Canlubang Calamba Laguna Philippines Job Title: Utility and Maintenance Engineer
Duties and Responsibilities:
- Production and Facilities machine and equipment Preventive Maintenance
- Proper operations and monitoring of facilities machine and equipment’s such as generator set, waste water treatment, water treatment ( demineralization process), boiler, compressor, pumps, clean rooms, fire pump, Reactors and heat exchangers
- Troubleshoots mechanical and electrical problems Page 2 of 4
SEPTEMBER 2000- OCTOBER 2019
TOYO INK COMPOUNDS CORPORATION
106-A Integrity Ave. CIP-1 Canlubang Calamba Laguna Philippines Job Title:
YR 2017-2019 Senior 2 Production and Maintenance
(P.M.& Engineering) Manager
- Asst. EMR & EPC
YR 2009-2017 Senior Production and Maintenance
(P.M. & Engineering) Manager
- EMR & EPC
YR 2005-2009 Production and Maintenance
( P.M. & Engineering) Manager
- EPC & 5’S chairman
YR 2002-2005 Maintenance (P.M. & Engineering) Manager
- 5’S chairman
YR 2000-2002 Maintenance (P.M.& Engineering ) Supervisor
- 5’S chairman
Duties and Responsibilities:
1. Oversee Production process and making sure that products are produced on time and are of good quality.
( Daily target planned output, quality per batch / product produced, issue and its corrective actions for improvement, production standards, trainings ) 2. Oversee Preventive Maintenance and Engineering department system and its activities.
(Planned machine maintenance, corrective actions for improvement,daily work orders and repairs, Plant operation permits, Projects, designs and implementations, Internal fabrications and modifications, proper waste disposal, safety programs, Government agency inspection and legal compliance) 3. Liaising among different department heads concerning plant operations.
( Daily coordination meeting with different department regarding plant operation status and concerns)
4. Make and improve needed procedures, works instructions and guidelines for the improvement of department systems operation which include compliance on I.S.O. standards
5. Manage and ensure continuous and effective function of all plant’s machinery, auxiliary equipment, utilities and building facilities, including establishment and implementation of Maintenance plans in order to avoid sudden mechanical or electrical failures.
6. Identify and manage necessary resources such as manpower, machines, materials including technicalities for effective operation and achievement of maintenance goals in high consideration or quality, efficiency and cost or agreed budget.
( Yearly planning base on sales forecast and as needed, ) 7. Implement and monitor plant projects according to developed system and procedure in coordination and / or compliance of regulatory bodies, utility companies, park management, etc. This entails decision making for the design, fabrication and/or repair in-house or third-party
8. Ensure activities meet with and integrate with organizational requirements for quality Page 3 of 4
and environmental management, health and safety and other legal requirements. 9. Serve other departments or colleagues in a supplier-to-customer concept, thereby committed on meeting customer’s requirements and satisfactions internally and externally.
( customer complaints and other compliance)
10. Performs other duties as may be assigned
( as Emergency Preparedness Chairman implementing and improvement our emergency preparedness manual and conduct such as trainings,fire drills, earthquake drills, and etc. . lead as Environmental Representative in compliance to I.S.O. 14001 requirements, .. Monthly Labor management council representative with the Union officers, .. CBA negotiator)
ACHEIVEMENTS / CONTRIBUTIONS
- Power supply conversion savings project from
Generator to Meralco (YR2003)
- Extruder Gearbox overhauling locally (savings)
- Awarded Best Manager (YR 2009)
- Transformer Upgrade savings project ( PEZA and
Meralco)
- New Power supply provider savings project (MPower)
- Reconditioning of old extrusion line from mother company for production expansion projects ( 3 lines )
- Highest production volume achievements
- Toyo Ink Subsidiary operations support ( training of new operators )
- Localized machine spare parts without suffering the quality
KNOWLEDGE AND SKILLS
- Department system analysis, planning and improvement
- Plant capacity planning and maximization of its lean operations
- HANDS ON Mechanical and Electrical trouble
- Production operation, set-up and handling of personnel
- Handling Engineering and Preventive Maintenance Department systems o Engineering activities like Design and improvement, cost and estimate, Major/minor projects and implementation, Government permits, issues and other legal requirement such as PEZA (electrical, mechanical, structural,, Municipal, Industrial park, DENR (PCO activities), ERC, and DOLE (OSHA- WEM) compliance.
o Machine Maintenance Management System (Preventive, Corrective, Predictive, Breakdown and Pro-active)
- Power plant operations and maintenance (<1250KVA Mitsubishi Genset)
- Facilities support equipment’s such as Compressor, heat exchangers, AHU, Boiler operations and maintenance
- Waste water treatment operations
Page 4 of 4
- Water treatment operations such as Demineralization (2B3T) (U.V)
- Machine set-up, restoration and Overhauling ( gearboxes)
- ISO 9001 and 14001 system and its compliance
- Pollution Control system
- Collecting Bargaining Agreement (CBA) negotiator with Union officer and other activities (LMC monthly meeting)
- Environmental Management Representation (EMR)
- Emergency Preparedness Chairman (EPC)
- Production operations training system (Total Productive Maintenance)
- Disciplinary Action Review Board panel (DARB)
- Operation SAFETY programs and training
- Basic Pneumatics with PLC control
- Extrusion Process (Plastics)
TRAINING AND SEMINARS
- Basic Occupational Safety Health ( BOSH)
- Systematic Managerial Analysis
- EMS 14001, QMS 9001, ROSH, TQM
- Emergency Response Preparedness
- Effective Problem Solving and Decision Making
- EMR skill development
- Risk Management for Effective Operations
- Trainers training operation
- Supervisory / leadership development training
- Failure mode and effect analysis
- Business Finance and Accounting for Non-Accountant
- 5’S and good housekeeping
- An introduction to Ergonomics
- Fire Safety and Prevention
- Leadership excellence for managers
- Mandatory Training for Fire Safety Practitioner
- Mandatory Training for Fire Brigade
- Basic PLC and Pneumatics
CHARACTER REFERENCE
Mr. John A. Tan
Toyo Ink Compounds Corporation Philippines
Plant Director / Sr. Sales Manager
049- 5491444
Contact this candidate