Glenn Paul P. Bajar
**-* ****** **., ****, Cavite, 4110
adbze4@r.postjobfree.com
Civil/Structural Engineer
Glenn Paul is a Structural Engineer with more than 9 years of structural engineering experience. Current project portfolio includes prestigious projects in local and foreign such as residential houses, midrise and high rise buildings and industrial structures. Structural design experience includes modeling, analysis, and design of buildings using ETABS, STAAD, RISA 3D, SAFE, RAPT, PROKON, MIDAS DESIGN, ADAPT, INDUCTA, EXCEL, MATHCAD, BLUEBEAM REVU, REVIT Structural, etc. Also familiar with various structural design codes such as ACI, AISC, ASCE, UBC, IBC, BS, Euro Codes, AS/NZ, ISIS Canada, and NSCP. Project Experience
Fil-Oz Prime Drafting Inc. (JUNE 2018 – DEC 2019)
POSITION: SENIOR STRUCTURAL ENGINEER
Fil-Oz Prime Drafting Inc. is situated in Malate, Philippines. We offer design and drafting services. Currently, we acquire some projects from SCP consulting and Engineering Fitness.
Epping Residential Tower (SCP Consulting) is 28-storey with 2 basements residential tower (hotel). Whole structure is modeled and analyzed using RCB Inducta and elements are designed using rapt, and SLB, RCC inducta softwares. Typical floor area is approximately 1200m2.
Location : 29-33 Oxford & 6-14 Cambridge St. Epping NSW Australia
Client : Architectus
Task : Modeling and Analysis of structure using Inducta.
: Element design using Rapt, and Inducta softwares.
: Schematic Design
: Design sketches for Draftsmen
: Preparation of calculation reports
: Coordination with other engineering discipline
Proposed VAC Chatswood Development (SCP Consulting) is 17-storey with 2 basements residential tower (hotel). Whole structure is modeled and analyzed using RCB Inducta elements are designed using rapt, and SLB, RCC inducta softwares
Location : 475 Victorial Chatswood NSW Australia
Client : Nettletontribe
Task : Modeling and Analysis of structure using Inducta.
: Element design using Rapt, and Inducta softwares.
: Schematic Design
: Design sketches for Draftsmen
: Coordination with other engineering discipline.
Avantra Apartment North Tower (SCP Consulting) is 11-storey with basement residential tower (hotel). Whole structure is modeled and analyzed using RCB Inducta and elements are designed using rapt, and SLB, RCC inducta softwares. Typical floor area is approximately 79m x85m.
Location : 659-669 Gardeners Road, Mascot, NSW Australia
Client : Icon Co
Task : Modeling and Analysis of structure using Inducta.
: Element design using Rapt, and Inducta softwares.
: Schematic Design
: Preparation of calculation reports
: Design sketches for Draftsmen
: Coordination with other engineering discipline.
2
Whiton Lane Tower (SCP Consulting) is 13-storey with 4 basements residential tower (hotel). Whole structure is modeled and analyzed using RCB Inducta and elements are designed using rapt, and SLB, RCC inducta softwares
Location : 87-89 Oxford St. Bondi Junction, NSW Australia
Client : Lindsay Bennelong
Task : Modeling and Analysis of structure using Inducta.
: Element design using Rapt, and Inducta softwares.
: Schematic Design
: Design sketches for Draftsmen
: Coordination with other engineering discipline.
180168 Alexandria Park Community School (SCP Consulting) is 4-storey school building with basement. Whole structure is modeled and analyzed using RCB Inducta software then elements are designed using rapt, and SLB, RCC inducta softwares
Location : Norwest Blvd, Norwest Park Baulkham Hills
Client : Richard Crookes Constructions
Task : Modeling and Analysis of whole structure using Inducta
: Element design using Rapt, and Inducta softwares.
: Schematic Design
: Design sketches for Draftsmen
: Preparation of calculation reports
: Coordination with other engineering discipline
Macquarie Town Centre (SCP consulting) is existing carpark which will be extended by 2 floors above. All the existing elements to modeled, analyzed, checked and retrofitted the failing members.
Location : Norwest Blvd, Norwest Park Baulkham Hills
Client : AMP Capital Investors / Westfield
Task : Modeling and Analysis of whole structure using Inducta
: Design using Rapt, and Inducta softwares.
: Schematic Design
: Design sketches for Draftsmen
: Preparation of calculation reports
: Coordination with other engineering discipline
Black water (Engineering Fitness) is a court with 24Wx38L playing court which has a curved roof supported only on both ends of its width. This roof support itself which means no purlins and framing needed.
Location : Varsity College, Qld.
Client : Varsity College
Task : Wind analysis.
: Coordination with other engineering discipline
: Structural design of columns and
: Design sketches for Draftsmen
: Steel Design
: Pile Design
: Preparation of calculation reports
Livingstone College (Engineering Fitness) is a court with 39.5Wx43.5L playing court which has a curved roof supported only on both ends of its width. This roof support itself which means no purlins and framing needed.
Location : Lot 1 on SP256151 62 Reedman Td. Ormeau Australia
Client : Livingstone College
Task : Curved roof wind analysis.
: Coordination with other engineering discipline
: Design sketches for Draftsmen
: Pile Design
3
: Steel Check
: Preparation of calculation reports
Coomera Anglican College (Engineering Fitness) is enclosed basketball/netball court with 40.6Wx91.8L which has a curved roof supported only on both ends of its width. This roof support itself which means no purlins and framing needed.
Location : Days Road Coomera QLD 4209
Client : Coomera Anglican College
Task : Curved roof wind analysis.
: Coordination with other engineering discipline
: Design sketches for Draftsmen
: Preparation of calculation reports
Middlemount South Mine (Engineering Fitness) is an existing workshop refurbishment (industrial building with mezzanine). It has 25Wx52L. This existing structure is retrofitted to resist maximum wind load.
Location : Dysart Middlemount Road Middlemount QLD 4746
Client : Middlemount South Mine Existing Workshop Refurbishment
Task : Structural wind analysis
: Coordination with other engineering discipline
: Structural Steel Design using Microstran.
: Design sketches for Draftsmen
: Preparation of calculation reports
VSL PHILIPPINES (MARCH 2017 – JUNE 2018)
POSITION: STRUCTURAL ENGINEER
As a specialist post tension contractor, VSL - a member of Bouygues Construction, leverages the most advanced construction methods and technologies to engineer, build and preserve complex structures. VSL creates innovative and customized solutions, from initial engineering to project execution, to take up its clients’ challenges.
The group has adapted post-tensioning principles to civil structures such as LNG tanks, reservoirs, plants, tunnels, off-shore platforms, concrete floating barges dams and stay cables. VSL Dampers mitigate vibrations in stay-cable bridges and buildings.
In addition to post-tensioning and stay cables, the group's scope of works covers precasting and segmental bridge erection launching gantries, formwork systems, repair works, rock and soil anchors, bearings, retained earth walls, heavy lifting, monitoring, geotechnics and deep foundations.
Task : Creating solutions to the problems at site
: Prepares Design calculations for each design;
: Carries out preliminary design review to identify all relevant input data, applicable requirements, potential structure types, methods and estimated quantities;
: Carries out detailed design to a level appropriate to the design brief producing calculations and necessary
drawings and sketches in accordance with programme requirements. Take account of hazards and risks during design development;
: Supervises production of detailed drawings;
: Checks design output of other design engineers;
: Reviews design with interested parties (Client,
Engineer, Project Staff, Government Bodies);
4
: Prepares specifications specifying outline methods, construction materials, construction equipment;
: Updates design to account for construction changes and problems;
: Monitors construction work (as necessary), to make sure that it is progressing according to the design;
: Evaluates designs once the construction is completed;
: Provides advice on design and other technical matters as required; and
: Helps tender for any alternative design works, and to increase the company’s PT-Buildings activities.
: Assists the Construction Department for any design calculations and any technical assistance that they need for the projects and for the client.
: Reviews, checks and approves elongation calculations using CE2000 or any accepted software or methods of determination by the company.
: Attends meetings with the client when necessary.
: Continuously improve skills and design software
enhancement trainings/studies.
: Performs the general responsibilities which are
mentioned in, company management system manual
(Quality Safety Environment), project quality plan (if any) and project health safety environment plan (if any). CPG CONTRACTOR SERVICES (FEBRUARY 2017 – FEBRUARY 2018) POSITION: FREELANCE STRUCTURAL ENGINEER
CPG Contractor Services is situated in Rizal, Philippines. They offer construction consultancy and management services.
Location : San Ildefonso Bulacan
Owner : Eagle Cement.
Task : Structural Steel Design and Analysis Conveyors
: Structural Steel Design and Analysis Transfer Tower
: Foundation Design of miscellaneous equipments.
Location : Imus Cavite
Owner : SL Harbor Bulk Terminal Corp.
Task : Foundation design of Diesel Tank
WUXI HUANGUANG ELECTRICAL ENG’G (JANUARY 2017 – JUNE 2017) POSITION: FREELANCE STRUCTURAL ENGINEER
Wuxi Huaguang Boiler Co.,Ltd. researches, develops, manufactures, and sells energy saving and emission reduction products in clean energy industry primarily in the People's Republic of China. It offers coal fired boilers for power plants; gas-steam combined cycle heat recovery steam generators; refuse incineration boilers; and biomass-fired boilers. The company was formerly known as Wuxi Boiler Factory. Wuxi Huaguang Boiler Co.,Ltd. was founded in 1958 and is based in Wuxi, the People's Republic of China.
Location : San Carlos City Negros Occidental.
Owner : Poyry Engineering Inc.
Task : Structural Steel Design and Analysis of Boiler
: Structural Steel Design and Analysis of conveyors. 5
: Foundation Design of miscellaneous equipments.
: Structural Design and Analysis of warehouse
LA SALLE DASMARINAS (JANUARY 2017 – MAY 2017)
POSITION: INSTRUCTOR 1
DLSU-D offers an unconventional take on education and allows students to learn in an environment surrounded by nature and inculcates in them not only the Lasallian values of faith, zeal and service but also allows them to experience and participate in socially responsible projects throughout their stay in the university.
Location : Dasmarinas, Cavite.
Task : Teaching the following engineering subjects o Structural Engineering
o Elementary Surveying
o Construction Materials and Testing
FLUOR DANIEL INC. – PHILIPPINES (OCTOBER 2015 –SEPTEMBER 2016) POSITION: ASSOCIATE DESIGN ENGINEER ll
Petronas RAPID Refinery and Petrochemicals Integrated Development – PETRONAS intends to build a grass root integrated Refinery and Petrochemical Complex by developing RAPID PROJECT (Refinery and Petrochemical Integrated Development) to meet both domestic and Asia’s energy and chemical demand. The RAPID PROJECT consists of a world scale integrated site which includes Refinery with a deep conversion scheme, 300 000 barrels per steam per day capcity, Naphtha Steam Cracker of 1.28 million tons of ethylene per year capacity; Petrochemical Derivative units, utilities, off site and jetty installation.
Location : Pengerang, Juhor, Malaysia.
Owner : PETRONAS
Task : Design and calculation of steel pipe racks using RISA 3D
: Foundation design and calculation of transformer, horizontal and vertical vessel, pits etc,.
SINGAPORE LNG TERMINAL – PHASE 3 EXPANSION This phase is in progress and will see the addition of fourth tank and more facilities to bring the Terminal’s throughput capacity to about 11 Mtpa by 2017. At 260,000 cubic metres, the fourth tank is slated to be the largest in the world, and will be able to receive a full cargo load from a Q-Max carrier (which is currently the largest LNG carrier in the world).
Location : Jurong Island, Singapore
Owner : Singapore LNG Corporation SLNG
Task : Design and calculation of steel pipe racks using RISA
: Design and calculation of horizontal/vertical vessel foundation.
6
HYDER CONSULTING / ARCADIS Group of Company (NOVEMBER 2013 - OCTOBER 2015) POSITION: ASSISTANT STRUCTURAL ENGINEER
Erby – Car park is an existing 4 Storey reinforced concrete car park with basement.
Location : NSW Australia.
Owner : Parramata City Council.
Task : Schematic 3D analysis and design of existing structure plus additional 8-storey commercial building.
: Pile and Foundation Analysis.
Northern Beaches Hospital – Car park is a 12-storey reinforced concrete car park with 2 basements.
Location : Warringah Road, Frenches Forest, Sydney, Australia.
Owner : Thiess.
Task : 3D Structural Analysis and Design using ETABS.
: Pile and Foundation Design.
Eastland. 5 Storey commercial building with basement.
Location : Australia
Task : Post tension design of slabs and beams using RAPT software.
Waters edge. 11 Storey residential building with basement.
Location : West End, Brisbane, Australia
Owner : Pradella Style
Task : Roof truss analysis using STAAD.
Farrer Substation.
Location : West End, Brisbane, Australia
Task : Analysis and Design using SAFE.
OGER BRANCH PHILIPPINES (APRIL 2012 – NOVEMBER 2013) POSITION: JUNIOR STRUCTURAL ENGINEER
KAP 01 (137 sites, 18 prototypes Reinforced Concrete Building)
Location : Middle East
Task : Analysis and Design Check using ETABS
: Detailing Check
: Quantity Survey
HHR Jeddah Car park (4 storey car park)
Location : Middle East
Task : Concrete Detail Check
: Structural Design Check
KACWC (Concrete tower)
Location : Middle East
Task : Concrete Detail Check
AYHAR VILLA TUNNEL (Concrete structure tunnel)
Location : Middle East
Task : Concrete Detail Check
7
E.H. SISON ENGINEERS CORPORATION (AUGUST 2011 – APRIL 2012) POSITION: CIVIL DESIGN ENGINEER
PRIMIER GUEST HOUSE - Existing 2 storey President Residential Building. Tasked to check structure based on updated structural codes and retrofit failed elements.
Location : Malacañang Palace along Pasig River
Task : Building Inspection
: Crack detection using PUNDIT
: Rebar scanning, extraction and testing
: Rebound hammer, slab coring and core sample testing
: Preparation of "As Built Plans"
: 3D Model analysis and design using ETABS.
: Analysis and Design of trusses using STAAD V8i.
: Preparation of calculation using Excel and MathCad
: Preparation of calculation report.
PRESIDENTIAL MANAGEMENT STAFF BLDG (PMS). Existing 12-Storey concrete office building. Tasked to check structure based on updated structural codes and retrofit failed elements.
Location : Arlequi St. San Miguel, Manila
Task : Building Inspection
: Crack detection using PUNDIT
: Rebar scanning, extraction and testing
: Rebound hammer, slab coring and core sample testing
: Preparation of "As Built Plans"
: 3D Model analysis and design using ETABS.
: Analysis and Design of trusses using STAAD V8i.
: Preparation of calculation using Excel and MathCad
: Preparation of calculation report.
BAUEER FOUNDAITON PHILIPPINES, INC. (JANUARY 2011 – AUGUST 2011) POSITION: FIELD ENGINEER
BORED PILE / COMPACTION GROUTING
Owner : SMCC Philippines Inc.
Location: : Taganito Claver Surigao del Norte
Task : Arrangement of job sequence on the site.
: Monitoring and Supervision of work production.
: Ensuring that workers are following all safety guidelines.
: Identify areas of work improvement in the company and assist in creating and implementing solutions
SOIL NAILING / SHOTCRETING
Owner : Banko Sentral ng Pilipinas BSP
Location: : Pasay City
Task : Arrangement of job sequence on the site.
: Monitoring and Supervision of work production.
: Ensuring that workers are following all safety guidelines.
: Identify areas of work improvement in the company and assist in creating and implementing solutions
8
Education
B.S., Civil Engineering, Cavite State University, Indang Cavite (2005-2010) MSCE Major in Structural Eng’g (2019 – Present)
Professional Registrations/Certifications
Registered Civil Engineer, PRC # 0118361
Training
Post-Tensioned Slabs in Seismic Zones
conducted by Partha Pratim Roy (Adapt Sr. Vice President - Technical) Marco Polo Hotel Ortigas Manila
July 28 & 29 2017
Structural Engineers Training. (Fluor Daniel Inc. – Philippines) The theory and practice of PERFORMANCE-BASED DESIGN THE FUTURE OF EARTHQUAKE ENGINEERING
conducted by Dr. Ashraf Habibullah (Computers and Structures Inc.) Crowne Plaza Hotel, Ortigas Ave. Cor. ADB Ave., Quezon City Philippines November 7, 2014
The theory and practice of PERFORMANCE-BASED DESIGN THE FUTURE OF EARTHQUAKE ENGINEERING (HANDS-ON PROCEDURES) conducted by Dr. Naveed Anwar (Asian Institute of Technology Consulting / ACECOMS) Crowne Plaza Hotel, Ortigas Ave. Cor. ADB Ave., Quezon City Philippines RAPT software training (Hyder Consulting office)
Hands on Training for post tension analysis and design SPACEGASS software training (Hyder Consulting office) Hands on Training for structural analysis
Construction Manpower Development Foundation
Reinforced Concrete Works
(Rebar works, Formworks, Concrete works and Masonry Works) Salawag, Dasmariñas, Cavite