Electrical Engineer QAQC

DEGREE : Bachelor Of Engineering (ELECTRICAL & ELECTRONICS)

Career Objective

To work in an organization where my skills and competence can be used to the maximum, and thereby leading to rapid growth along with the organization.

To deal with challenging new works and will provide quality service to the company.

To maintain good interpersonal relationship and Team work

Special Skills

Work efficiently both as a leader as well as a team member with optimism and enthusiasm. Make success in career challenging jobs.

Fast Learning and implementation. Ability to adapt, take and give direction in a rapidly changing environment.

Academic Records

Course

Institution

Board /

University

Specialization

Year of

Completion

B.E

Lead Auditor

Srinivasa College of Engineering and Technology, Chennai.

Decibel, Kerala

Anna

University

IRCA

Electrical and Electronics

ISO 9001-2015 (QMS)

2007

2019

Work Experience (Abroad) – 5+ Years

COMPANY : NATIONAL CONTRACTING COMPANY.LTD. ABUDHABI

PROJECT : EPC for Qusahwira field development phase-2,

CLIENT : PETROFAC EMIRATES / ABUDHABI NATIONAL OIL COMPANY. (ADNOC)

DESIGNATION : ELECTRICAL ENGINEER QA/QC

DURATION : From 10th June 2019 to still

DUTIES AND RESPONSIBILITIES:

•Implementing the Quality in work after the detail study of Scope of work, PQP, ISO 9001-2015

•Preparation of MS, ITP as per clients Engineering specification and shell DEP.

•Highlighting all discrepancies detected during inspection and informing the same to Department Manager.

•Liaise with client’s representative on QA/QC & Construction activities.

•Identify NCR, CAR, PAR and verify the actions taken and ensure for timely close out.

•Inspecting the Installation and testing of 33KV OHL Tower line.

•Assisting Earthing, cable tray indoor and outdoor, cable sizing load calculations.

•Drafting the designed drawing as per client specification and standards.

•Conducting IR, Hipot and Ductor Test for HV/LV cables, AAA OHL conductor.

•Electrical Equipment earthing installation and testing.

•Review, control, monitor and maintain documents, records and drawings.

•Conducting Quality trainings to the staffs and technicians at site level and achieved continual improvement in process.

•Coordinated with all disciplines for effective implementation of QMS and also responsible for conducting and clearing the External & Internal auditing issues.

•Material receiving inspection will be done and noted if any changes as per MTO, will be reported to the procurement department for further action.

SAFETY COURSES ATTENDED IN ADCO

Safety Induction, Work at Height, Heat stress Training by ADCO.

H2S Awareness and Escape Training by ADCO.

COMPANY : TECNIMONT (S.P.A) PVT.LTD. ABUDHABI

PROJECT : Al Dabbi’ya surface facilities phase-3, EPC PROJECT

CLIENT : ABUDHABI NATIONAL OIL COMPANY. (ADNOC)

DESIGNATION : ELECTRICAL ENGINEER QA/QC

DURATION : From 6th September 2017 to 26th September 2018

DUTIES AND RESPONSIBILITIES:

•Preparation of MS, ITP as per clients Engineering specification and shell DEP.

•Implementing the Quality in work after the detail study of SCOPE OF WORK.

•Highlighting all discrepancies detected during inspection and informing the same to Department Manager.

•Liaise with client’s representative on QA/QC & Construction activities.

•Preparation of Red line markup AsBuilt drawings and Testpack Dosiers.

•Identify NCR, CAR, PAR, DR and verify the actions taken and ensure for timely close out.

•Assisting Earthing, cable tray indoor and outdoor, cable sizing load calculations.

•Drafting the designed drawing as per client specification and standards.

•Inspecting the Installation and testing of Transformers 130MVA, 20MVA, 220KV GIS, 132KV,6.6KV,3.3KV Switchgears (HV/MV/LV), Motors, UPS Batteries, Cables, CP, Earthing, Lighting system and Building inspections.

•IR, Hipot and Ductor Test for HV/LV Switchgears, various panels/cables and its operation and functional test as per the procedure.

•Ensure that the electrical constructions pre-commissioning and commissioning activities are carried out in accordance with standards and spec, in a safe manner.

•Review, control, monitor and maintain documents, records and drawings.

•Conducting Quality trainings to the staffs and technicians at site level and achieved continual improvement in process.

•Coordinated with all disciplines for effective implementation of QMS and also responsible for clearing the External & Internal auditing issues.

•Carried out Explosion proof material and Equipment inspection and creating site queries if any discrepancy found.

•Material receiving inspection will be done and noted if any changes as per MTO, will be reported to the procurement department for further action.

SAFETY COURSES ATTENDED IN ADCO

Safety Induction, Work at Height, Heat stress Training by ADCO.

H2S Awareness and Escape Training by ADCO.

COMPANY : ZAWAWI POWERTECH ENGINEERING .LLC. OMAN

PROJECT : EMC & EPC PROJECTS.

CLIENTS : STST & PETROLEUM DEVELOPMENT OF OMAN (PDO)

DESIGNATION : ELECTRICAL ENGINEER QA / QC

DURATION : 22nd June 2015 to 21st June 2017.

DUTIES AND RESPONSIBILITIES:

•Implementing the Quality in work after the detail study of SCOPE OF WORK.

•Highlighting all discrepancies detected during inspection and informing the same to QA/QC Engineer/Manager.

•Liaise with client’s representative on QC activities.

•Preparation of Red line markup AsBuilt drawings and Testpacks.

•Identify NCR, CAR, PAR, DR report and verify the actions taken and ensure timely close out.

•Assisting Earthing, cable tray indoor and outdoor, cable sizing load calculations.

•Drafting the designed drawing as per client specification and standards.

•Implementing and Maintaining the Construction Quality Procedure (QPR), Inspection and Test Plan (ITP) and Method Statements (MS), Contract Quality Plan (CQP).

•Inspecting the Installation and testing of Transformers, Switchgears, Motors, UPS Batteries, Cables, CCTV, Earthing, Lighting system and Building inspections.

•Ensure that the electrical constructions pre-commissioning and commissioning activities are carried out in accordance with standards and specifications in a safe manner.

•Review, control, monitor and maintain documents, records and drawings.

•Overhead Line (OHL) installation, switchyard erection and maintenance.

•Conducting Quality trainings to the staffs and technicians at site level and achieved continual improvement in process.

•Coordinated with all disciplines for effective implementation of QMS and also responsible for clearing the External & Internal auditing issues.

•Carried out Explosion proof material and Equipment inspection and creating site queries if any discrepancy found.

•Material receiving inspection will be done and noted if any changes as per MTO, will be reported to the procurement department for further action.

Testing and commissioning of Power Transformers as per the approved specification.

Testing & Commissioning of HV, MV and LV SwitchGears, VCB, Battery Charging unit with Batteries and UPS, AC/DC Converter & DCDB Panels along with vendor.

IR, Hipot and Ductor Test for HV/LV Switchgears, various panels/cables and its operation and functional test as per the procedure.

SAFETY COURSES ATTENDED IN OMAN

Safety Induction, Work at Height, Heat stress Training, H2S Awareness and Escape Training by PDO.

Instant Fire Response (IFR) & Dealing with Hazardous (DWHR) by PDO.

COMPANY : NASSER S. AL HAJRI CO. LTD, QATAR

PROJECT : BARZAN ONSHORE EPC PROJECT.

CLIENTS : JAPAN GAS CORPORATION. & RASGAS COMPANY LIMITED.

DESIGNATION : ELECTRICAL ENGINEER QA/QC (E & I)

DURATION : 02-AUG-2012 to 30-OCT-2014

DUTIES AND RESPONSIBILITIES:

•Making arrangement for inspection as per (ITP) field quality control procedure (QCP), forwarding Request for inspection (RFI) to client, preparing inspection test report (ITR) for the work involved as per clients required procedures & specifications.

•Periodic Inspection of equipment in Hazardous (zone - 0, 1, 2) & Safe areas included detailed inspection of all EX Certified equipment.

•Regular coordination with construction team for the specification, fabrication and material requirements and correlate the inspection activities as required throughout the construction period.

•Responsible for the inspection of HV, MV, LV (Electrical & Instument) cable laying, dressing and its testing of cables on trench and after glanding and termination in substation panels and field Equipment as per IFC Drawings and standard specification.

Performing Hipot and Ductor Test for Switchgears, Busducts and cables.

Assisting Earthing, cable tray indoor and outdoor, cable sizing load calculations.

Drafting the designed drawing as per client specification and standards.

•Testing of MV & LV Motors, LCS and its Functional test & No load test (SOLO RUN TEST)

•Testing of MOV, Lube oil heaters, Emergency Diesel Generators, Compressors, HRSG motors (20000 KW),

•Testing & Installation of all CP System (Cathodic protection for UG pipeline)

•Testing of Plant Earthing System and Lighting system.

•Inspecting of Installation and testing of Switchgears (33kv GIS ZX2 ABB,6.6kv, 415v,VFD panels), Transformers 132/33kv, 33/6.6kv, 6.6/.415kv (up to 140 MVA).

•Inspecting the Installation and testing of Steam Turbine Generator and clarifying the client needs along with the vendors.

• Understanding the techno-commercial aspects of Contract & Familiarization of documentation for ISO standards

•Method statements (MS) and Material approval request (MAR) preparation.

•Technical coordination with client for the field modifications in line with contractual obligations.

•Inspection of installation and testing of Telecommunication system (CCTV, PAGA), FOC, cable Tray, conduits.

•Performing Installation & Testing inspections of all substation and field electrical equipments and evaluation as per QA/QC Standards (NEMA, IEC, ANSI, ISO).

•Ensure that the electrical constructions pre-commissioning and commissioning activities are carried out in accordance with standards and specifications.

•Review and request for approval of inspection test plan (ITP), site instruction and implementation of Project Quality Plan (PQP) and preparation of punch list.

•Responsible for clearing the Auditing and site walkthrough comments in time.

•Responsible for the compilation and review of final documents and handovering the recorded inspection test reports to the clients as white files.

Testing and commissioning of VFD DRIVE ACS5000, Exciter Unit, and Water Cooling Unit (WCU) with the coordination of VFD vendors.

Commissioning of Control and Protection panels/schemes, Battery Charging unit with Batteries and UPS, testing of panels, checking operation of various Protection schemes and Relays such as REF, REM and LV Motor protection relay, Under/Over voltage, Over current & Earth Fault etc..

SAFETY COURSES ATTENDED IN QATAR

Behavioral Observation & Intervention Observer training from JGC

Safety Induction, Work at Height, Heat stress Training by JGC.

Work Experience ( INDIA) – 4.5 Years

Worked as Electrical Engineer in “M.V. Groups Pvt. Ltd.”, Chennai from 10-JAN-2012 to 15-JUL-2012

Work Done:

Preventive and Periodical maintenance work done for the electrical DG sets, Transformers, HVAC centralized, split and packaged systems, Sewage Treatment Plant, Pumps & Water supply systems, Hot Water Plants. Inspection, Testing and Monitoring of Preventive & Predictive maintenance for all Electrical equipments. Enhanced the interiors of multi-storey building and supervised the scheduled works for the contractors at renovation with an ISO standard quality.

Worked as Electrical Engineer (Erection & Maintenance) in “M/S. CVT ENTERPRISES” – A grade Electrical contractors, Chennai. From 01-MAY-2008 to 15-DEC-2011

Work Done:

Erection of Transformers, Diesel Generators, Switchgears, MV, LV Panels, SSB, Motors, at various Multi storey building constructions. Guiding the supervisors for the New Projects and AMCs at various construction sites. Inspection, Testing and Monitoring of Preventive & Predictive maintenance for all Electrical equipments. Coordinating with the Project Manager for the completion of project in time with Standard Quality and latest technology.

Worked as Electrical Engineer in “The Aruna Groups Pvt. Ltd.” Chennai, From 10-SEP-2007 To 20-APR-2008

Work Done:

Operated and maintained the electrical 380KVA DG sets, 500KVA Transformers, MV & SSB Panels, HVAC centralized, split and packaged systems, Sewage Treatment Plant, Pumps & Water supply systems, Hot Water Plants. Inspection, Testing and Monitoring of Preventive & Predictive maintenance for all Electrical equipments. Enhanced the interiors of multi-storey building and supervised the works done by contractors on renovation.

Computer Proficiency

AUTOCAD, MS Office, 3D Navigation in construction, Windows XP, Electrical System Design Engineering

Personal Details

•Permanent Address:

No.1/38A, Nellikaran Street,

Thiruvottiyur,

Chennai, Tamilnadu, India

Pin: 600019

•Personal Data:

Date of Birth : 10-01-1986

Sex : Male

Father's Name : P.K.Krishnankutty Nair

Mother's Name: T.Malathy

Nationality : Indian

Marital Status : Married

•Language Proficiency:

English, Hindi, Tamil, Malayalam

•Hobbies:

Listening Music, Reading,

Internet Surfing, Driving

(TNELB) Electrical C-Licenses No:- C-42129

•Passport Details:

Passport No : S3649485

Date of Issue : 20-FEB-2018

Date of Expiry: 19-FEB-2028

•Key Credentials:

Confident, Team coordination

Excellent communications, interpersonal and presentation skills.

Email : ********@*****.*** Ph.No. +918********* (India-Home)

Alt. Email : ********@*****.**.** Ph.No. +919********* (India-Own)

Skype ID : surya14feb Ph.No. +971********* (UAE)

Declaration

I, Sureshkumar .T, do hereby confirm that the information given above is true to the best of my knowledge.

Date:

Place: SURESHKUMAR .T

SURESHKUMAR .T

RESUME

Contact this candidate