Electrical Engineer Engineering

CURRICULUM VITAE

AMIRUDIN ADAMGANI

LEAD ELECTRICAL /INSTRUMENTATION ENGINEER

Skype ID :amirinbox11

Email: ***********@*****.***

Contact :+917*********

Career Objective:

An electrical engineering graduate with in-depth knowledge about codes, standards and regulations of the field, seeks to work as a senior electrical engineer for a leading organization.

Professional strengths:

Comprehensive knowledge of electrical and control engineering, design and codes

Familiar with regulatory standard and procedures of electrical industry

Experience with High voltage line 132/66/33/13.8/11KV and its related Equipments

Prepare cable sizing calculations

Material requisitions for Electrical & Instrumentation equipments as per the specification and location classification

Perform Technical Evaluation of vendor purchase order and its material quotation as per the approval - Witness for Factory Acceptance Tests

Provide support to other disciplines for raising RFQs, TBE and VDR

Inspection & Pre-commissioning of GIS High & Medium Voltage

Review Single line diagram, material specification,data sheet,Site layout and its related queries

Site Tendering, Cost Analysis, Quotation, Siteinvoices, Change order.

Material Management, Cost controlling.

vendor document review

Extensive knowledge in the field of electrical & instrumentation subsystems

Review and answer RFQs from contractor side,

Ability to monitor, supervise, coordinate the field inspection

Review Construction Specification of all Equipment and its related SPDP

Attention to detail with excellent communication and project management skills

Possess sound organizational and analytical skills

Interpersonal & Communications Skill

Testing & Pre-commissioning

Health & Safety Management

Team-Building and Staff Development

Educational Qualifications:

Bachelor of Engineering in “Electrical & Electronics Engineering” (Full Time /Regular)

Dhaanish Ahmed College of Engineering, ANNA UNIVERSITY.

Work Experience:

Total Experience:

Degree qualified Electrical Engineer with years of EPC environment experience in Power, Petrochemical, Refineryand Oil & Gas Industry, infrastructure. Experience includes Project Management, Inspection, Testing, Pre-commissioning, Engineering, Procurement,Construction, Site invoices, Change order (With cost & time impact),etc,

Project Name:Al-Zour New Refinery Project, (Main Processing Unit) EPC-0055A

Client:KNPC /KIPIC

Position: Lead E & I Engineer /Inspector

Company Name: Sinopec Engineering Group Limited (SEG) (Jan-2018 to -Nov 2019)

Location: Kuwait.

Project Name: Replace Operation Maintenance Engineering (EPC-593), Yanbu Crude Oil Terminal

Client:Saudi Aramco

Position: Lead Electrical & Instrumentation Engineer

Company Name: Othman Saleh Al-Ghamdi Contracting (Sep-2014 to Oct-2017)

Location: Yanbu Industrial City, YCOT. Saudi Arabia

Project Name:P&C of Security Forces in RIC, Ras Al Khair Industrial City

Client:Royal Commissionfor Jubail

Position: Electrical and Instrumentation Engineer

Company Name: Othman Saleh Al-Ghamdi Contracting (Feb-2014 to Jun-2017)

Location: Ras Al Khair Industrial City, Saudi Arabia

Company Name:Amrutanjan Limited -Fine Chemical Division.(Jan-2014 to Aug-2014)

Position: Electrical Engineer

Location : India.

Company Name:TCP Limited (Dec-2012 to Jan -2014)

Position: E & I Engineer

Location: India.

Company Name: S.A Fabricator -SAIL & ROURKELA STEEL PLANT (Apr 2011 to Dec -2012)

Position: Trainee Engineer

Location: India.

Work Experience:

Nature of hand on experience

Safe execution of project

Aware about international standards and codes

Implementation of safety policy and requirements

Inspection, Testing & Pre-commissioning of all High Voltage Electrical Equipment

Site surveillance for all Brown field projects

Preparation of work schedule.

Direct involvement on testing & commissioning.

Testing & Pre-commissioning on motors, circuit breakers, transformers, UPS,etc

Preparing scope of work report to the client

Assisting for estimation.

Preparation of materials take off and ordering materials for the project.

Inspection /Installation for MV Switch Gears, motor control center, Transformer.

Inspection for instruments FT, PT, PDT, PCV, RV, HV, LV, TV, FV, TE, TT, FE, XZV, PG, TG, MOV, Heat tracing tubes

Protective relays testing and commissioning.

High voltage switch yard,

Transformers, bus duct.

Fire diction and alarm system

Interaction with Engineering Dept. for approval of deviation and modification

Supervising the installation of various electrical substation & plant equipment (indoor & out door)

Follow up with material management for timely supply of material at site

Supervising the cabling, termination

Substation installation (indoor out door) GIS, Generators Oil & Gas fired, generating station installation and commissioning.

Punch list preparation

Verify sub-contractor progress & submitted invoice against field progress.

Coordinate with site management for the submittal of progress to client.

Familiar with international codes and standard-NEC, NFPA, IEC, ANSI, Saudi Aramco Engineering Standard, Saudi Royal commission standards,DEP.

Responsibilities:

.

Organize, Implement, conduct and manage constructionprograms as per the company’s Policy

Site inspection and witness for the contractor inspection.

Familiar with NEMA, ANSI, IEEE and IEC based electrical codes, standards and regulations.

Performing Site Survey

Review IFC drawings and its related documents issued by other Contractor engineering

Preparation & Review of MR packages, SPDP packages, IAP,NMR 601 /602/603 etc

Perform site surveys and define / execute modifications to existing facilities

Prepare sub-contract requisitions about site installation under scope.

Review Suppliers' quotations and prepare technical evaluations

Project Development Studies, FEED & Detailed engineering development and handling of various Electrical works in the Offshore Oil & Gas Industry.

Engineering coordination with various discipline engineers during Concept optimization studies and with Contractors during FEED & Detailed engineering development and management of such contracts.

Experience in Pre-commissioning & Commissioning of oil & gas Electrical facilities.

Preparing punch list for MCC.

Inspection for LV/MV/HV Switch-Gear, Transformer, MCC for Substations, PAGA System, Telecommunication system.

Inspection for instruments FT,PT,PDT,PCV,RV,HV,LV,T,FV,TE,TT,FE,XZV,PG,TG,MOV,Heat tracing tubes .

Testing & Pre-commissioning of Medium Voltage Equipment as per project specification and Standards

Company invoices.

Maintaining project progress report .And weekly update

Inspection for instrument installation.

Witness for Insulation resistance test for all Power & Control cables.

Witness for High-Potential test for MV/HV power cables.

Witness for Loop test.

Witness for OTDR test for fiber optic cables, splicing, and termination.

Co-ordinate the document controls of technical submittals, drawings etc. With the project team and to ensure that the progress as per the approved schedule has been done, to ensure their issue, amendments and recall of control documents

Co-ordinate all inspections, monitor the required test and records inspections and test made pas the contract plan and contract specification

Liaise with the client representatives for the conduct of day to day quality related project activities.

Co-ordinate with project manager regarding work performance and authority to stop work in any area where discrepancies remain uncorrected.

Provide technical support to the project manager and guidance to site staff in submission of materials for approval, request for inspection, shop drawings, As-built drawings O&M Manuals.

Assist Manager in conducting in Internal Quality Audits.

Preparing Pre-Commissioning and Commissioning guidelines

Preparing Commissioning Data Base and OTP’s for Electrical

Providing Assistance during Construction and Pre-commissioning execution, on site, during modifications.

Providing Assistance during Commissioning Execution, on site, to Commissioning Personnel

Participating in Technical reviews during the engineering, Construction, Pre-Commissioning and Commissioning phases

Safety Compliance

Project engineering, preparation of scope of work for tender, bid evaluation, project risk assessment and management.

Witnesses Factory/Site Acceptance Tests.

Project Scheduling

Experience in field inspection and acceptance testing of electrical & Instrumentation equipment.

Ensure that Non-Conformance Report (NCR) are raised once the activities deviated from the contract specifications or normal construction industry practices

Co-ordinate with the project staff to compile and maintain pertinent records of inspections and testing until end of the contract and all pertinent records for retention on completion of the project.

Attend Monthly Project Review Meeting (PRM) and alert the project team of any potential problems

Preparation of site Project plan for awarded contract projects. Responsible for commissioning

Coordinate with the personnel of the client and sub-contractor personnel involve in the project pertaining the quality matters.

Make Daily, Weekly and Monthly reports

Prepare final acceptance documentation as well as Pre-Commissioning reports to the client sector.

Key Accomplishments:

Ensure that all works shall comply with the specifications, standard and approved drawings

Inspects material received at the site during construction and ensure there compliance to standards and manufacturers specification prior to usage for construction.

Maintaining the quality record.

Perform site Inspection required to verify the work done prior for the joint inspection with the client personnel

Review all electrical packages &drawings and required documents.

Conduct Job monitoring and miscellaneous paper works

Monitor daily discipline activities and verifies compliance NEC/NEMA Conducts activities and inspection in accordance with the QA manual and Quality Control Procedures.

Conduct and secured approval of all submitted documents for Quality inspection Preparing documents for Company Quality Audit.

Take caring company invoice and Cost Management

Witness during Commissioning with the client.

Computer Proficiency:

Software –Auto CAD

Microsoft Office: Word, Excel, PowerPoint.

3D model

Strengths:

Safety Awareness

Ability to work in a team

Organizing and managing ability.

Hard working and a quick learner.

Discipline and Persistence.

Good communication skills.

Positive Attitude and Effort prioritization.

Dedication to the work.

Personal Profile:

Father's Name :Mr. M. ADAMGANI.

Sex : Male

Nationality : Indian

Current Location : India

Language's known : English, Hindi, Urdu, Tamil, Arabic(conversable), Malay (conversable)

Marital Status : Unmarried

Passport No : J9418983

Declaration:

I hereby declare that the above-mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of the above-mentioned particulars.

AMIRUDIN ADAMGANI

Contact this candidate