Electrical Inspector

Summary

A Licensed Electrical Practitioner in the Philippines with experience as Field and Site Electrical Engineer in Airports and Rail construction and project management. With experience in the Oil and Gas construction projects, commercial, residential and Industrial construction and maintenance works. Experienced as Fire and Life Safety Inspector in airport project, Installation and Testing and Commissioning of electrical system, Fire Detection and Alarm System and Security and Access Control System.

Skills

Licensed Electrical Practitioner

Project management

Team Leadership

Computer

Time Management

Troubleshooting

Teamwork

Experience

Bechtel & Co LLc & ENKA & Co LLc JV-BEB Consortium

MEP Coordinator/Construction Supervisor/ACS Door T&C Superintendent

Development of Muscat International Airport, Sultanate of Oman

February 28, 2016 to July 31, 2018

DUTIES AND RESPONSIBILITIES:

As ACS Doors T&C Superintendent:

Schedule the work on critical doors to ensure timely completion.

Perform quality control duties and responsibilities on the work being performed by the subordinates as per the project specifications.

Coordinate required inspections with another Access Control System contractor.

Identify personnel non-compliance with safety, health, and environmental quality standards.

Identify conflicts in construction progress and communicate to project team for resolution.

Maintain daily log/tracker of personnel activities on the jobsite and T&C documentations.

Ensure the team has corrected all deficiencies identified during testing.

Walk the units on project to monitor activities and assist in future planning.

Ensure that the job site is always kept in a clean and organized manner.

As MEP Coordinator/Construction Supervisor

Oversees MEP services installation including Fire Detection and Alarm System, Telecommunication and Building Management Systems and Access Control as per project specifications and codes and standards.

Coordinates and manages all components of a construction project related to the mechanical, electrical and plumbing elements in the assigned area of construction.

Inspection of MEP sub-contractor installation works prior to engineer’s inspection.

Ensures that services provisions clearance is provided in time for structure.

Contact

Address:

Block 2 Lot 1 Plaridel VI Subdivion, Medicion 1-C, Imus City, Cavite 4103 Philippines

Phone:

+63-46-481-**** Home

+63-939-***-**** Mobile

Email:

adbjkn@r.postjobfree.com

Languages

English - Fluent

Tagalog - Native

BENEDICTO LLANA ERAZO

Inspect concealed MEP service installation prior to closure of void /riser etc. and obtaining MEP Responsible Engineers sign off.

Monitors the electrical and plant rooms progress of works and update the trackers.

Supervises the complete installations of electrical small power and lighting requirements necessary for the operation of Information Technology Rooms and Flight Information Display Signage.

Prepares work permit and material requisitions necessary for electrical installation.

Coordinates with other contractor and subcontractors in the installation of CCTV cameras; installation of data points and power where required.

Attended and coordinates with the Engineer the electrical inspections of IT Rooms.

Supervises the installations of doors access control electrical power and control wirings.

SAUDI BECHTEL CO. – BACS RMP FIELD ENGINEERING

Senior Field Electrical Engineer

Riyadh Metro Project, Kingdom of Saudi Arabia

September 17, 2014 to November 11, 2015

DUTIES AND RESPONSIBILITIES:

Provides engineering assistance to superintendents, directs assigned personnel in meeting cost and time schedules, verifies materials, equipment and quality and assures results meet design requirements, project specifications and codes and standards.

Provides technical and administrative direction to subordinate construction engineers and field engineers others, as assigned.

Responsible for the activities of assigned construction and field engineers, such as the application of drawings, specifications and subcontracts.

Coordinates constructability with Design Engineering.

Coordinates RFI’s from subcontractors and suppliers.

Coordinates Temporary Works designs and field Sketches.

Prepares work permit requests and incorporate permits into work packages.

Prepares Method Statement, JHA, STARRT, REAL Work Packages.

Prepares Work Packages, supporting documents checklists and coordinates CWP & ITP’s with QC & RMTC.

Prepares ITP’s, coordinate third party testing input Coordinates construction document submittals to the client representative.

Prepares Field Material Requisitions for temporary and some permanent plant materials, (shorts and commercial off the shelf items).

Performs receipt inspection of materials and equipment and also coordinates their release or partial release and packaging for installation in the field.

Prepares field sketches, model extractions for construction planning documents.

Redline supplier drawings for as-built.

OVERSEAS BECHTEL INC. – (PM) FIELD ENGINEERING

Field Electrical Engineer/Site Electrical Engineer

Hamad (New Doha) International Airport

October 13, 2007 to May 30, 2014

DUTIES AND RESPONSIBILITIES:

As Field Electrical Engineer (January 16, 2012-May 30, 2014):

Working with the FIRE AND LIFE SAFTY TEAM as Fire and Life Safety Inspector-Electrical, whose primary job was:

a.Inspect airport facility buildings and structures to assesses and identify potential fire hazards and other fire and life safety code non-compliant installation.

b.Inspect facilities that will store, handle, and use hazardous materials to ensure compliance with codes and regulations.

c.Check buildings are equipped with fire detection and alarm systems, fire protection, control equipment, including fire extinguishers and ensure installation is in compliance with the latest edition of appropriate codes and standards.

d.Verify firestop and sealant installation are properly installed and documented by accredited/authorized installers and inspectors.

e.Explain fire and life safety code requirements to engineers and construction workers.

f.Check for combustible materials, electrical installation safety compliance, inadequate or non-functional fire exits and signage.

g.Check and test emergency power and emergency lighting system are compliant according to latest code requirement.

h.Test fire detection and alarm systems and fire protection systems and ensure proper functionality as per the approved Cause and Effect Matrix.

i.Keep abreast of current life safety codes and other standards.

j.Monitors the Centralized Fire Alarms and Detection System events at the Main Fire Station in preparation and during QCDD inspection.

k.Assists Qatar Civil Defense in the inspection of all airport facilities Fire and Life Safety requirement and the testing of the Fire Detection and Alarm System and Fire Protection Systems as per the approved Cause and Effect Matrix and as required by the Civil Defense.

l.Review Civil Defense required documents in preparation for the Qatari Civil Defense inspections; verify contractors’ close-out rectifications on QCDD comments on fire and life safety installations.

Conducted inspections on airport contractors’ electrical installations; Witnesses the Testing and Commissioning of low voltage electrical installations and assisted the testing and commissioning of the Jet Fuel Storage Facility Instrumentation and Controls;

Help carries out the review of Inspection and Test Plans, Testing and Commissioning Procedures and Commissioning Test Reports of contractors; help carries out Punch listing walk downs with the End Users and Clients; attended meetings with the Clients, End Users and Contractors for resolutions, procedure and closure of Punch items identified during the walk downs and during the Testing and Commissioning; attended/witnesses Factory Acceptance Testing of electrical equipment within Doha area.

Working as PunchWorks inspector and Close-out Reviewer;

Ensures that all works and testing complies as per the project specifications and codes and standards.

Maintain project safety awareness and enforce company safety policy as company Inspector and ES&H implementer to the supervised contractors.

As Site Electrical Engineer (October 13, 2007 to January 15, 2012):

Assist the Testing and Commissioning Engineer in the review of Airline Support Facilities Contractor’s Electrical Testing and Commissioning Procedures including Fire Detection and Alarm System, Building Management System and Access Control Systems.

Assist the Testing and Commissioning Engineer in the review of Airline Support Facilities Contractor’s Operations and Maintenance and Training Manuals.

Carries out the review of Red line/Mark up and As-built drawings.

Carries out the review of Contractor’s Final Turn-over Documents.

Carries out the snagging walk down together with the Client and Contractor on contractor’s electrical and special systems/telecommunication installation in Cargo Terminal Complex, Emiri Hangars Complex and Remote Transfer East and West facilities.

Witness the testing and commissioning of fire detection and alarm systems and ensure proper functionality as per the approved Cause and Effect Matrix.

Witnesses the Contractor’s Testing and Commissioning activities of electrical system which includes the Low Voltage Switchgears and Distribution system, Uninterruptible Power Supply systems, Generator/Standby Power systems, Ground Power Units, Lighting and Lighting Control System, Motor Control Centers and other electrical equipments; Telecommunication Distribution

System, Security Access Control System and Building Management System in Cargo Terminal Complex, Emiri Hangars Complex and Remote Transfer East and West facilities.

Carries out daily inspections to ensure that the civil/structural (from piling up to structural steel erection) and electrical works which includes installation of duct banks, electrical and telecom manholes construction, conduit installation, transformer, Low Voltage Switchgear and panelboards installation, generator installation, UPS System, MCCs, Fire Alarm System, Access Control System, CCTV System, BMS, PA Systems, Telecom and Data System, Power and Telecom Cable installation and terminations, Lighting and Control System being carried out to the highest levels of ES&H requirements in Cargo Terminal Complex, Emiri Hangars Complex and Remote Transfer East and West facilities.

Monitor the contractor’s civil/structural (from piling up to structural steel erection) and electrical works in Cargo Terminal Complex which include Cargo Handling Systems installation, Emiri Hangars Complex and Remote Transfer East and West facilities to verify compliance with relevant drawings, specifications and standards to deliver the highest levels of Quality. Record the Non-conformance, accept satisfactory work and raise punchlist items on incomplete works.

Monitor the progress against the accepted schedule.

Monitor the Contractor’s plant machineries and manpower usage.

Carries out the review and approval of Contractor’s methods statements and advice on construction methodology.

Verify and ensure Fire and Life Safety requirement are followed and installed by the contractor, ie; Emergency Power and lighting system requirement, electrical rooms access and egress, warning and directional signs, emergency lighting illumination, Fire and smoke detectors requirements in each spaces, proper requirement and installation of Manual Pull Stations, visual and audio alarms and electrical installation in hazardous locations.

Verify that the works are being carried out in accordance with the accepted methods statements and report any non-conformance to my Senior Engineer or Resident Engineer.

Advise and assist my Senior Engineer/Resident Engineer with the coordination of interfacing contracts.

Interacts daily with the Contactor’s site engineers and Quality Control Engineers.

Analyze productivity and quality and produce relevant metrics to demonstrate performance.

Prepare daily construction report and take photographs where relevant.

Liaise with Field Engineering and advice on Inspection and Test Plan monitoring points.

Ensures that all works and testing complies as per the work methodologies, inspections and test plans, project specifications and codes and standards.

Acts as company Safety Inspector and ES&H implementer to the supervised contractors.

BECHTEL INTERNATIONAL, INC.

Electrical Foreman

Equatorial Guinea LNG Train 1, Punta Europa, Equatorial Guinea, W. Africa

February 9, 2006 to August 1, 2007

DUTIES AND RESPONSIBILITIES:

Prepare Job Hazard Analysis and Safety Task Analysis Risk Reduction Talk to identify the hazards and identify its preventive measures/control procedure in the execution of Electrical Installation works such as Cable Trays, Conduits, Transformers, Panel and Control boards, Switchgears, Cables, Lightings and Termination works and fire detection and alarm system.

Supervise safety requirements @ site, ensure to it that all workers strictly observe and follow the control procedures/measures of the hazards while implementing their work assignment.

Read and interpret plans and job specifications for actual implementation.

Supervise job implementation, report work accomplishments on a daily basis; prepare materials, tools and manpower requirements for specific scope of works of/for specific work area.

Make sure that daily targets and accomplishments are within defined boundaries, limits and within the scope of works. Initiate/conduct work orientation to meet job requirements and other concerns related to or may affect accomplishments.

Ensure to it that accomplishments, client’s request, project incidents at the jobsite are recorded and reported to immediate supervisor.

Responsible for the safekeeping and control of materials, tools and equipments needed in every work area.

Screen and train On the Job Training local field workers and supervise the upgrading of their skills.

Ensure that all workers adhere to the company's accepted code of conduct and discipline at the jobsite and responsible for documenting any acts of violations committed by any members of the crew.

Conduct and End of Shift Walk-down to ensure that good housekeeping is maintained and all equipments are turned off and secured after each daily work.

Prepare the necessary work permits when required, impose its safety guidelines to the crew and ensure that it will be closed after the day's task.

HUGE-TECH CONSTRUCTION CORPORATION

Project Engineer/Manager

Makati City, Philippines

September 2002 to February 2003

DUTIES AND RESPOSIBILITIES AS PROJECT/OPERATIONS MANAGER:

Responsible for the whole operations of the Project and Operations Department.

Monitor the whole projects development and status.

Conduct coordination meetings with our company Project Engineers/Consultant concern regarding the implementation of the project.

Ensures that all works and testing complies the project specifications and codes and standards.

PECC ELECTRICAL CONTRACTING & TRADING CO.

Project Engineer/Manager

Las Piñas City, Philippines

June 1, 2000 – September 2002

DUTIES AND RESPOSIBILITIES AS PROJECT/OPERATIONS MANAGER:

Responsible for the whole operations of the Project and Operations Department.

Monitor the whole projects development and status.

Conduct coordination meetings with our company Project Engineers/Consultant concern regarding the implementation of the project.

Ensures that the works and testing complies the project specifications and codes and standards.

INTERFACE INDUSTRIAL CORPORATION

Foreman/Field Engineer

Interface Bldg., 1679 Dian St., Makati City

April 1997 – May 2000

DUTIES AND RESPOSIBILITIES AS PROJECT/FIELD ENGINEER:

Supervise/Monitor project development and interpret detailed plans and specs.

Organize and direct work schedule for field personnel and equipments.

Prepare and submit weekly accomplishment report and evaluate project status in preparation for the cost of progress billing.

Coordinate with Resident Engineer/Consultant concern regarding problems in the implementation of the project.

Ensures that all works and testing complies as per the work methodologies, inspections and test plans, project specifications and codes and standards.

Prepare as-built plan, electrical material cost, estimates and purchase materials needed in the project.

DUTIES AND RESPONSIBILITIES AS FOREMAN:

Supervise electrician to carry out their duties on electrical maintenance and installation works.

Schedule the work order according to the priority needs.

Check from time to time electrician assigned to a certain area.

See to it that the process quality of work as base on electrical standard of the company.

Coordinates closely with the other trades during the implementation of project alteration and maintenance services.

Implement/Administer Company Rules and Regulations.

Ensures that all works and testing complies as per the work methodologies, inspections and test plans.

Prepare daily accomplishment report of subordinates supervisor’s log.

INTERPACK DEVELOPMENT CORP. – Imus, Cavite

Industrial Electrician - Maintenance

July 16, 1995 – November 30, 1995

DUTIES AND RESPONSIBILITIES:

Responsible for the smooth and efficient operation of all electrical equipment and machineries.

Troubleshoot defects that occur during the tour of duty.

Rewind electric motors and transformers.

JNCO – P.O Box 108, Rahima, KSA

Electrical Foreman

September 25, 1991 – July 27, 1993

DUTIES AND RESPONSIBILITIES:

Supervise electricians to carry out their duties in Electrical Installation works such as Cable Trays, Conduits, Transformers, Panels and Control boards, Cables, Lightings and Termination works, earthing and grounding system, telecommunication cablings and fire detection and alarm system. Read and interpret plans and job specifications for actual implementation.

Report work accomplishments on a daily basis; prepare materials, tools and manpower requirements for specific scope of works in each assigned work area.

Ensure to it that accomplishments and project incidents at the jobsite are recorded and reported to the immediate supervisor.

Responsible for the safekeeping and control of materials, tools and equipment needed in every work area.

Schedule the work of the electricians.

Assist electricians troubleshoot defect that needs direct attention.

Establish Safety Rules and implement safe method and manner.

LIWAYWAY MARKETING CORP.- Cavite, Philippines

Industrial Electrician

January 16, 1990 – September 2, 1991

DUTIES AND RESPONSIBILITIES:

Responsible for the smooth operation of all electrical equipment and machineries.

Repair/ Rewind electric motors and transformers and generators.

Q.K. CONSTRUCTION – Subic, Zambales

Electrician

April 15, 1985 – January 15, 1990

DUTIES AND RESPONSIBILITIES:

Responsible for the installation, alterations to the electrical wirings and equipments.

Trace existing wiring installations.

Prepare as-built or record drawings.

Education

Bachelor of Science: Industrial Technology - Electricity – 1985 Surigao Norte School of Arts and Trades – Surigao City

Certifications and Trainings

Professional Regulation Commission (License) Registered Master Electrician

National Training Institute – Electrical Safety Rules

Health, Safety and Environment Leadership Training

Superintendent Leadership Workshop

Bechtel Supervisor Development Program

Hazard Identification Training School

Management Skills Overview

Construction Quality Management System

Construction Scheduling

Bechtel Effective Leadership Training

Prime Contracts Management; Contract/Subcontract Formation & Contract/Subcontract Management

Negotiations Workshop CTR241

Claims Preparation, Analysis and Defense Workshop

Root Cause Analysis

Time Management

Contact this candidate