Bushair Ahmed – Senior Electrical Engineer

Abu Dhabi, UAE

Mobile: 009***********

adbe2o@r.postjobfree.com / adbe2o@r.postjobfree.com

Dear Sir / Ma’am,

I am writing this letter to apply for a job position in your company. I carry over twelve (12) years of experience working with Technip, WorleyParsons, Siemens & Cegelec on major Onshore and Offshore projects (Oil & Gas and Power sector) as a Senior Electrical Engineer. These include the design and engineering of Process plants, Offshore Super-Complexes & Power Generation facilities for ADMA OPCO (Das Island and ZWSC), Wellhead platforms for Dubai Petroleum, Oil-Fields for ADCO (Dabb'iya, Rumaitha) and LNG, Gas treatment facilities for GASCO (Habshan) etc.

After graduating as a Bachelor of Engineer (Hons) Electrical & Electronics from Birla Institute of Technology & Sciences Pilani - Dubai, I joined WorleyParsons in 2007 as an Electrical Engineer and I worked with them for 5 years. Since then I have worked for Technip, Siemens and Cegelec

My technical experience include the execution of entire project life-cycle from the conceptual stage to the plant start-up. I have designed Electrical systems for Brownfield & Greenfield projects, produced Electrical load lists / schedules, Specifications & Datasheets for Electrical Equipment, Scope of works, supervision of designers for Single line diagrams, Electrical layouts and drawings, Interconnection diagrams, MTO's, Material Requisitions, reviewed Vendor offers / Technical Bid Evaluations and Post-Order Vendor document review.

I have performed Equipment sizing calculations, conducted Power system studies (ETAP), Equipment adequacy checks, PDMS Model reviews and Hazardous area classifications. I have also conducted Inspection & Testing, Factory acceptance tests (FAT) and Site Acceptance Tests (SAT) for various electrical equipment like UPS, switchgears, Transformers etc.

I have also undertaken numerous site visits to projects both within and outside of UAE. I have been involved in offering Commissioning assistance, closing out punch items; resolving site queries / technical issues and carrying out feasibility studies and prepared subsequent reports.

I also underwent a Rotation programme for five (5) months into Project Management, Safety & Risk Engineering, Business Development, Project Controls, Quality Management and Environment Engineering. This has enabled me to grasp the broader picture of an organization. My skill set includes not only core technical competencies but also the basic functional competencies required by an engineer in the workplace such as leadership, business insight and interpersonal skills.

I feel confident I possess the requisite qualifications and skills for working as a Senior Electrical Engineer. I have attached my Resume for your information. I welcome the opportunity to discuss how I can be an asset to your team and look forward to hearing from you in the near future.

Yours Faithfully,

Bushair Ahmed

SUMMARY

Over twelve (12) years of work experience as a Senior Electrical Engineer on Oil & Gas and Power sector projects (Conceptual, FEED & EPC) with TechnipFMC, WorleyParsons, Siemens & Cegelec Abu Dhabi.

EXPERIENCE

Jan 2019 – Present (Senior Electrical Engineer – TechnipFMC, UAE)

Arctic Liquified Natural Gas project (ALNG-2) – Detailed engineering services (Novatek Russia)

Nov 2016 – Dec 2018 (Senior Electrical Engineer – Cegelec, UAE)

Power Generation for Nasr Field development (Installation of Gas Turbine Generators) - EPC Onshore project (ADMA OPCO / ADNOC Offshore)

May 2016 – Oct 2016 (Engineering Coordinator / Electrical Engineer– Siemens, UAE)

Al Dabb’iya Revamping of 33kV GIS – Onshore project (ADCO / ADNOC Onshore)

New CCB and HMI Upgrade 11kV switchgear – Onshore project (ADGAS / ADNOC LNG)

Integrated Gas Development Expansion (IGD-E1) – Onshore project (ADGAS / ADNOC LNG)

March 2013 – May 2016 (Electrical Engineer – Technip, UAE)

Rashid C Wellhead Platform & Pipelines - EPC Offshore project (Dubai Petroleum)

Integrated Gas Development Expansion (IGD-E) Habshan – EPC Proposal (GASCO / ADNOC Gas processing)

Al Dabb’iya Oil Field development – FEED Onshore project (ADCO / ADNOC Onshore)

Rumaitha Shanayel Oil Field development – FEED Onshore project (ADCO/ ADNOC Onshore)

Nov 2007 – Feb 2013 (Electrical Engineer – WorleyParsons, UAE)

100MBD ZWSC modifications project - EPC Offshore project + EPC proposal + FEED (ADMA OPCO)

New Oil Well Manifolds Project – EPC Onshore project (Tatweer Petroleum Bahrain)

Installation of 8th Power Generator on Das Island – FEED Onshore project (ADGAS / ADNOC LNG)

Habshan Acid Gas Flare Recovery project – FEED Onshore project (GASCO / ADNOC Gas processing)

Hazardous Area Classification Study for USSC Das Island – FEED Onshore project (ADMA OPCO)

Upgrade of Zirku Utilities CNIA project – FEED Onshore project (ZADCO/ ADNOC Offshore)

Enhancement and Development of Jebel Ali Tanker Berth 4 – FEED Onshore project (DP World)

North Middle Area Gas Exploitation project – EPC Onshore project (Stroytranzgas Russia)

Summary of the activities carried out:

Worked on following electrical equipment - Switchgears (HV, MV, LV), 132kV GIS, Transformers (11/132kV, 11/0.433kV), Diesel Generators, UPS’s, Generator Circuit Breakers, 33kV IS limiters, Remote Tap Changer Control panels (RTCCP’s), Local Control Cubicles (of GIS systems), Protection Relay panels (PRP), Soft starters, Navigational Aids, Solar power systems, Motors, Cables, Plug-in termination, Bulk Materials.

Produced Specification and Datasheets for electrical equipment

Produced Electrical Design Basis, Electrical Load Lists, cable schedules, Electrical Operation and Control procedure / philosophies, Starting and Synchronisation philosophies, Protection systems.

Performed sizing calculations for Transformer, EDG, AC & DC UPS, Battery, Rectifier, Cable, Earthing and Lighting systems and distributions.

Undertook detailed site visits to observe the present condition of the existing electrical facilities and their usability to the new scope of work; identified tie-ins; prepared site visit reports.

Carried out adequacy checks for electrical equipment like Transformers, switchgear, DG's to check their suitability to accept modifications.

Single Line Diagrams, Protection & Metering diagrams, Block Diagrams, Cable / Lighting / earthing Layouts, Interconnection diagrams, installation details (power, lighting, earthing), Equipment layouts

Interdiscipline Coordination between engineering disciplines, 3D model reviews, inputs to Risk assessment.

Hazardous area classifications, electrical equipment to Zonal classifications, component selections.

Detailed Material Take Off (MTO's), Price schedules for Subcontractors, Demolition drawings for Construction teams

Produced Multi Cable transits (MCT) schedules and subsequent MCT arrangement layouts.

Carried out Power system analysis (using ETAP) by conducting Load Flow study, Short circuit calculations, Motor start up study, Transient stability analysis, Harmonic analysis of the electrical network and produced the subsequent reports.

Designed Electrical Heat Tracing systems

Produced Material & Supply Requisitions, RFQ’s for electrical equipment.

Reviewed vendor offers, liaised with vendors, deviation lists, and produced Technical Bid Evaluation and Tabulation reports for different electrical equipment.

Worked on 132kV & 220kV GIS Compound substation and Technical Bid Evaluations.

Input to Technical Queries and Technical Bid Evaluations for Mechanical and Instrument packages.

Interfaces with Procurement and Expediting departments, Purchase orders.

Coordination with project planners / controllers, Cost Control department, assessment of project progress.

Monitor project progress and scope, project time schedules, design changes, initiate Design change notices

Post order Vendor document review, vendor meetings, design freeze activities of electrical equipment.

Procurement support and expediting support for materials and equipment

Liaison / Coordination with Clients, resolution of key technical issues, comment resolution sheets (CRS’s)

Application of cost effective solutions, uphold optimum quality while meeting specification

compliance, Value added engineering.

Developed construction sequence to meet zero process-shutdown requirements by Clients.

Participated in Factory Acceptance Tests (FAT) / Inspection & Testing in Italy, France, Finland, Spain, Czech Republic, Germany & Indonesia for Switchgear, UPS, Diesel Generator, Transformers, 11kV motor, 132kV cables, Local Control Cubicles (LCC), Protection Relay Panels (PRP), 132kV Gas Insulated Switchgear (GIS), close-out of punch list.

Coordinated with construction contractors (NPCC, Dubai Drydocks), fabrication yard and subcontractors, resolved site queries, undertook periodic site visits to fabrication yard.

Technical support and assistance to commissioning team as required, Site Acceptance Test (SAT), close-out of site punch items

Participate in electrical engineering reviews, contribute to business improvement initiatives, cost considerations in design decisions

Supervision of other electrical engineers, Review / Validate detailed Design and Engineering Deliverables

Earned value analysis, productivity assessment, manpower mobilization, forecasting engineering deliverables, spreadsheets for manhour tracking

Review ITB (Invitation to Bid) documents during proposal phase

Prepared man-hour estimates, Execution Statements, Mobilisation plans and Technical Qualifications for proposals / Tenders.

Scope of works, requisitions for sub-contracts

Participated in Quality conformance & Auditing sessions

Action items from HAZOP workshops, E-HAZOP workshops, Technical PEER reviews

Design review meetings and workshops, Standardization of electrical department procedures

Participated in technical meetings, raised concessions requests and technical queries to Clients

Education

B.E. (Hons.) Electrical & Electronics Engineering

At Birla Institute of Technology and Sciences Pilani – Dubai

Successfully graduated as an Electrical & Electronics Engineer in 2007 securing First Class

C.B.S.E Higher Secondary (XIIth Standard) & C.B.S.E Secondary School (Xth Standard)

At Abu Dhabi Indian School- Abu Dhabi & At Al Noor Indian Islamic School – Abu Dhabi

Passed with DISTINCTION

Specific Technical Expertise/Specialist Courses

Well-versed with major International Standards & Codes such as IEC, IEEE, API RP, NEC, NEMA, ATEX; well-versed with Company standards such as ADMA-OPCO, GASCO, SHELL, Dubai Petroleum, ADCO

Skilled in ETAP software, Chalmit software, Underwent SmartPlant Electrical (SPEL) training

Floor Fire Warden - Attended Fire Warden Training Courses

Underwent Offshore Sea Survival Training Course (BOSIET), H2S / Breathing apparatus training course

Contact this candidate