Name: Tim Smith

Education: US Naval Nuclear Power School (November 1986)

Alcorn central high school (1984)

Skills & Abilities:

Over 30 Years of Operations and Maintenance of Electric Power Plants.

Managed a team of 25 commissioning engineers and over 600 construction personnel on a large CCGT project in Kuwait.

Led a construction and commissioning team in a DCS overhaul from WDPF to Siemens T-3000.

Acted as Division Leading Petty Officer for electrical division on board US Navy Nuclear Submarine.

Conducted presentation of new CCGT power plant in Kuwait to the US Ambassador to Kuwait, the South Korean Ambassador to Kuwait, The Honorable Minister of Electricity and Water to Kuwait and various dignitaries and media staff.

Chaired daily, weekly, and monthly staff meetings and customer meetings.

Chaired daily conference calls with Senior Project Management.

Submitted daily, weekly, and monthly reports to customer and Senior Project Management.

Provided numerous PowerPoint presentations for various entities.

Commissioning Manager – Hatch Ltd Resolution Copper, Superior Arizona (November 2018 – present)

oEPCM Commissioning Manager

oMine restoration and re-commissioning

oInstalled and commissioned 3 Cummins 3MW Emergency Gensets, a 13.8KV Emergency SWGR, a new ABB 4160VAC SWGR for above and below ground.

oInstalled and commissioned new chillers, air compressors, cooling tower, glycol pumping system for above and below ground down to 7000 feet.

oInstalled and commissioned new underground ventilation systems for cooling and air replacement.

oDeveloped all commissioning schedules and procedures.

oCoordinated with 3 different contractors above and below ground.

oDeveloped the commissioning team.

oMaintained the master punch list

oDeveloped handover packages

oPrepared all testing plans

Commissioning Manager – Lackawanna County, PA USA Salem Lackawanna Energy CCGT Plant (June 2018 – October 2018) GE Centerline Equipment

REV1 JOB

Responsibilities included:

·Mobilize as Commissioning Manager for GE.

·Ensure all GE documentation is ready for turnover

·Complete schedule including ST startup and all testing/tuning

·Participate on daily schedule meetings

·Coordinate vendor support for all emissions testing

·Assist in punch list clearing

·Participate in equipment failure analysis and resolution.

·Send detailed daily reports to all stakeholders.

·Equipment GE 7HA .02 units in single-shaft configuration with A650 ST.

Commissioning Manager – Salem, MA, USA Salem Footpring CCGT Plant (January 2018 – May 2018) GE Centerline Equipment

REV1 JOB

Responsibilities included:

·Mobilize as Commissioning Manager for GE.

·Ensure all GE documentation is ready for turnover

·Complete schedule including ST startup and all testing/tuning

·Participate on daily schedule meetings

·Coordinate vendor support for all emissions testing

·Assist in punch list clearing

·Participate in equipment failure analysis and resolution.

·Send detailed daily reports to all stakeholders.

·Equipment GE 7FA.05 GT in multi-shaft configuration with A16 ST.

Commissioning Manager – Carrollton, Ohio, USA Carroll County CCGT Plant (September 2017 – December 2017) GE Centerline Equipment

Responsibilities included:

·Take over for outgoing CM to completion of contract (2 Months)

·Ensure all GE documentation is ready for turnover

·Complete schedule including ST startup and all testing/tuning

·Participate on daily schedule meetings

·Coordinate vendor support for all emissions testing

·Assist in punch list clearing

·Participate in equipment failure analysis and resolution.

·Send detailed daily reports to all stakeholders.

·Equipment: GE 7FA.05 GTs and A14 ST

Mechanical Start Up Lead – Oklahoma City, USA Mustang Simple Cycle Power Plant (March 2017 – September 2017) EPCM

REV1 JOB

Responsibilities included:

·Managed the daily activities for multi-discipline Pre-commissioning and commissioning teams.

·Formed Operations plans for O&M.

·Managed the daily and weekly meeting to update client.

·Lead Cause and Effect analysis.

·Developed all flushing and cleaning plans for contractor.

·Participated in key commissioning tests and inspections.

·Updated schedule weekly for construction completion and start up.

·Managed all startup activities on site.

·Managed completions department to insure proper Handover and Turnover packs were generated properly.

·Equipment: 7 Rolls Royce Trent 60 gas turbines.

Commissioning Manager(PMC) – KSA Marafiq Yanbu 2 HFO/ALCO Power and Water Project (May2014 – Dec 2016)

Responsibilities included:

·Managed the daily activities for multi-discipline Pre-commissioning and commissioning teams.

·Interfaced with Operations Daily to develop plans and organize site walkdowns.

·Managed the daily and weekly meeting to update client.

·Lead the Root Cause Analysis team for Marafiq.

·Reviewed and approved all commissioning and operations procedures.

·Participated in key commissioning tests and inspections.

·Reviewed micro and macro schedules for completeness.

·Managed all startup activities on site.

·Managed completions department to insure proper Handover and Turnover packs were generated properly.

·Developed key strategies to lead the project to Initial Acceptance.

·Test Director for all operational, capability, reliability, and performance testing.

·Equipment: 3 Doosan Fuel Oil Boilers, 3 Doosan D11 STs, 2 Entropie MED distillation units.

·

Mechanical Maintenance Manager – Indiantown, FL USA Florida Power and Light (October 2013 – May 2014) REV1 JOB

Responsibilities included:

·Managing a team of maintenance craft

·Taking daily readings on the thermal solar plant to determine efficiencies.

·Manage the team of mirror cleaners.

·Inspect for and report any environmental issues.

SITE MANAGER – KUWAIT CCGT GENERAL ELECTRIC (July 2012 - October 2013) Responsibilities included REV1 JOB

·Managed the day to day activities for construction, startup, commissioning, and testing of a 2000MW CCGT site in Kuwait.

·Chaired daily, weekly, and monthly meetings with the EPC and customer.

·Wrote daily, weekly, and monthly reports to the Senior Project Management team.

·Hosted daily conference calls with senior staff and management.

·Approved/Disapproved all financial transactions.

·Maintained a working schedule and updated it frequently.

·Managed the site EHS program.

·Managed a team of 25 commissioning engineers and 600+ craft.

·Wrote the completions schedule.

DEPUTY/COMMISSIONING MANAGER – KUWAIT CCGT GENERAL ELECTRIC (October 2011 – July 2012) REV1 JOB

Responsibilities included

·Ran the commissioning and testing program.

·Scheduled all tests and procedures.

·Heavily involved in startup and testing of all Combustion turbines (GE 9FA) and steam turbines (GE D-11).

·Wrote/reviewed/approved all commissioning and testing procedures on site.

·Managed the entire commissioning team in their daily activities.

·Managed a team of 40 commissioning engineers.

·Assisted in management of EHS program.

·Generated and/or reviewed all test reports prior to submittal to the customer.

·Coordinated the classroom training and OJT for the O&M staff.

LEAD OPERATIONS SUPERVISOR – KUWAIT CCGT GENERAL ELECTRIC January 2011 - October 2011) REV1 JOB

Responsibilities included

·Performed daily walk downs and inspection of combustion turbines, steam turbines, and BOP.

·Wrote daily reports on construction activities and potential problems.

·Performed mechanical commissioning activities such as cooling water flow balances, Lube Oil flushing and startup, fuel oil flushing and commissioning, initial turning gear operations, control valve calibration, steam plant steam blowing and cleaning,

·Conducted all first fire events and first roll for steam turbines.

·Conducted and performed commissioning and contractual testing on GTs and STs.

·Supervised many initial startups for BOP systems.

·Participated in cold and hot loop verification.

·Conducted a review of DCS and assisted the DCS team in a fully successful auto-sequence start/stop process.

·Was single point of approval for all site LOTO.

·Conducted training for the O&M staff.

GENERATION PROCESS SPECIALIST PROGRESS ENERGY (April 2001 - January 2011)

Responsibilities included

·Operations and maintenance of 5 power blocks on a 2300 MW CCGT site.

·Participated in the construction, commissioning, startup and testing of two Siemens 2 on 1 power blocks(501FD GTs and HE steam turbines) and one GE 2 on 1 power block (GE 7FA GTs and GE D-11 ST).

·Performed testing and maintenance on all rotational equipment in this plant including alignments, vibration analysis, lubrications, bearing inspections/replacements, calibrations, valve tuning, logic upgrades and modifications, etc.

·Maintained the entire plant calibration database.

·Trained new personnel.

·Assisted in planning and coordination of plant outages.

SHIFT ENGINEER NUCOR STEEL (April 1995 – April 2001)

Responsibilities included

·Responsible for electrical and I&C maintenance in the melt shop and casting area of a 2 million ton/year flat rolled steel mill including AC and DC motor drives, starters, PLCs, transmitters, nuclear thickness and level gages, all types of instrumentation and control valves, strain gages and load cells, overhead cranes and hoists, etc.

·Troubleshoot and repair of all electrical and I&C equipment.

·Updating and upgrading of plant PLCs (Siemens, Allen Bradley, Modicon)

·Also performed much mechanical maintenance.

NUCLEAR OPERATOR, ELECTRICAL US NAVY - SUBMARINES (December 1984 - March 1995)

Responsibilities included

·Qualified up to and including Engineering Watch Supervisor

·Staff instructor at the S8G land-based nuclear prototype.

·Participated in construction and commissioning of USS Kentucky (SSBN 737).

·Served aboard 3 nuclear submarines in the engineering department.

·Coordinated maintenance activities for electrical division.

·Planned and coordinated several outages.

Timothy Mark Smith

adbb2p@r.postjobfree.com

863-***-**** (USA)

Contact this candidate