I-* FL-*, Five Star Complex Gulshan Iqbal Block *, Karachi Pakistan

Cell: 033*-******* / 030*-*******

E-mail: adbajr@r.postjobfree.com

Syed Majid Hasan

Last five years highlights:

Professional Experience

Extra-Curricular

Qualifications Academic & Professional

Total years of experience: 18 Years; Oil and Gas Experience is: 10Years

Maintenance (PM/CM) / Construction, Shutdown / Turnaround Experience in Oil and Gas, Refinery, Power, BMR, Revamp, EPF and Project Management.

Success fully commissioned the oil & gas plant As Senior Instrument Technician.

Extensively involve in the upgrading project of five; Solar Turbine; As Senior Instrument Technician. Team member of two early preventive maintenance of Ruston gas turbine.

As Senior Supervisor established a site for Inspection, Refurbishment, maintenance, Calibration and Job execution for the construction of 115k BPD refinery.

Project Management for Installation of Lube Oil Revamp Refining Project, National Refinery Limited; as Supervisor Instrument.

CC Energy Development Oman from 08 Dec 2012 to 10 July 2016 (28/28 Rotational Jobs)

I have joined this organization as SENIOR INSTRUMENT TECHNICIAN in commissioning to plant maintenance phase, look forward and execution of PM jobs for production separator, Tank gauging system, and heater treater H2S unit shipping pumps, TVP analyzer, auto grebe sampler and BVS station. Also preparing planning of PM jobs for plant maintenance. Working with FOX India, Siemens S7 control and automation system. Designed and documentation for workshop setup including Electrical, mechanical and Instrumentation department. Tools, equipment arrangement, working & calibration benches preparation. Designed develop a database for equipment spare parts and maintenance schedule as plant requirement. Extensively involved in plant Upgrading Modification, Commissioning and New EPF Construction or Expansion.

PETROLEUM DEVELOPMENT OMAN from 14 Apr 2011 to 02 Dec 2012 (90/30 Rotational Jobs)

Plant Maintenance job in PDO YIBAL OMAN. Working as SENIOR INSTRUMENT TECHNICIAN with Special Technical Services L.L.C. Strictly fallow Permit to work systems (PTW PERMIT HOLDER), Startup Assistant & Maintenance of Rotating Equipment such as Turbine, Compressor, Pumps and Process related Equipment’s. Working in CCR and Field, well familiar and using PLC, DCS, PEFS, FLD, ILD such as Instrument Layouts, Instrument Hookups, Instrument JB / Marshalling / IO Termination Panel Wiring drawings, Logic Narrative, Logic Diagrams, Cause & Effect Matrix, Complex Control loops. Working on Fire & Gas System., Honeywell TDC 3000(FSC), Delta V Foundation Field, Vibration monitoring system 3500 & 3300.

On my performance I get a chance to Standalone handling the upgrading project of five Solar Turbine Fuel Gas Seal Oil Fire and Gas System with Emerson Delta V DCS Control System, Inspection Functional Testing as Client and Commissioning Start up assistant.

SAFETY AWAIRNESS:

Handsome SAFETY Training (HSE and PTW system) against personal safety as well as plant safety. Safe working Procedure (According to work permits). Having Firefighting training, Special training on safety topics like H2S, Housekeeping, Firefighting, Use of Personal Protective Equipment (PPEs), Acid handling, Confined spaces, Emergencies handling, Noise pollution and First Aid etc.

KESC THERMAL POWER STATION. 01Jan 2010 13Apr 2011

SHUTDOWN JOB FOR TURBINE #2, #3, #4 AND #5.

Worked as INSTRUMENT TECHNICIAN

Control Systems: ABB Pro Control 30 & V Five.

Control Valve Calibration, servicing activity during Yearly Overhauling of Turbine. Preventive and corrective Maintenance of Instrumentation, Four Wire Pressure Transmitter, Flow Transmitter and Typical Power Plant Temperature Loop Testing and Calibration. DCS and V Five Loop testing. Shut dawn Maintenance Call out and Startup Emergency Call out Duty.

DESCON ENGINEERING LTD. 21 July 2008 to 31 Dec 2009

PROJECT: REFURBISHMENT 115K BPD REFINERY

CLIENT: BOSICOR PAKISTAN. (Byco: http://www.byco.com.pk/)

Contractor: DESCON ENGINEERING

As a "SENIOR SUPERVISOR INSTRUMENT"

Inspection, Refurbishment, Calibration and Job execution for the construction of 115k BPD refinery.

Inspection of instrument and equipment that remove from Gulf Refinery, Melbourne, U.K

It’s an honor to me I have play key role to established the site facility and workshop setup for the construction of Pakistan Biggest oil refinery under the supervision of senior manager. Activities are repair, servicing, calibration, machining, overhauling, welding, hydro-testing of control valve, PSVs, pneumatic/electro-pneumatic control panels. Manpower management and monitoring for the best output of the site facility. Designs develop the standard operation procedure and handling the all jobs related activities. Dealing with vendor, supplier and sub-contractors.

MOODY INTERNATIONAL (18th Oct to 3rd Dec 2007)

PROJECT: REHMAT-3 TI-IN PROJECT

CLIENT: PETRONAS CARIGALI PAKISTAN.

Contractor: PCL (Pipe Link Construction)

As a “E&I INSPECTOR”

Inspection Monitoring and Job execution for the construction of Gas wellhead TI-IN Project in witch Installation of Intech RTU panel, Alderley Wellhead Control Panels (WHCPs), Rosecrrogien Methanol injector and corrosion inhibitor, Gas scrubber, Diesel Generator and BP Solar panel. PSVs, Control Valve, Pressure Flow and Temperatures Inspection, Hydro testing, Calibration, Installation, Electrical/Instrument Cable Laying, Termination, Hook-up, Field Calibration and Loop Checking.

Cable Tray, Instrument Support, Mechanical Support Fabrication and Installation. Using P&ID and Isometric for Instrument Marking. Measurement of cable, Cable Route and Cable Tray also Tubing Measurement for Invoicing Verification.

FAUJI FERTILIZER BINQASIM LTD (Feb to May 2007)

PROJECT: BALANCING MODIFICATION REVAMPING

As a "INSTRUMENT TECHNICIAN" Modification Revamping and Construction of Benfield + LP boiler Hydrogen Recovery Unit + SYN Gas Chiller, Air Blower with Modicon PLC and Infi 90 DCS. CCR to Field Installation Termination Loop testing and Functional Testing.

DESCON ENGINEERING QATAR L.L.C. (Aug 06 to Feb07)

PROJECT: QATAR GAS3&4 ONSHORE PROJECT

CLIENT: CTJV (CHIYODA-TECHNIP-JV/QGX)

Contractor: Descon

As a "INSTRUMENT TECHNICIAN"

Construction & Installation for EARLY PRODUCTION FACILITY.

Installation of Substation Cable Laying, Manpower & Job Monitoring. Loop Checking, Hock up and Field Calibration.

SYSTAMATIC ENGINEERING SERVICES. (Apr to May 06)

PROJECT: Makori I

CLIENT: MOL PAKISTAN OIL AND GAS B.V.

Contractor: PCL (Pipe Link Construction)

As a "SUPERVISOR INSTRUMENT" With SES.

Construction & Installation For EARLY PRODUCTION FACILITY, Installation of Separator, Heat Exchanger, Degasser, Scrubber, Glycol Regeneration Package, HP/LP Flare System and Gas Dehydration System. Cable Laying termination and loop testing. Generator & Lighting System Cabling, CCR Termination, PSVs, Control Valve, Pressure Flow and Temperatures TX Calibration, Hydro testing, Installation, Termination, Hook-up, Field Calibration and Loop Checking.

NATIONAL REFINERY LTD. (10JAN TO 28DEC 2005)

PROJECT: Lube II Revamp

CLIENT: NATIONAL REFINERY LTD.

Contractor: ENAR Petrotech Services (Private) Limited

As a "SUPERVISOR INSTRUMENT" With ENAR Petrotech Services (Private) Limited.

Project Management For Installation Of Lube Oil Revamp Refining Project, National Refinery Limited. In This Project Our Scope Is That to Installation of Sub Station Dilchill Crystallizer, Dehydrator, Rotary Vacuum Dewaxing Filter & Field / Control Room Instrumentation, Calibration, Hookup, Installation, Termination Loop testing & Commissioning.

Calibration and Hydro-testing of Control Valves with DVC Positioner. Calibration and Functional Testing of Level Switch Pressure Switch, Level-Trol, PT, FT and TT.

Cable Tray, Instrument Support, Mechanical Support Fabrication and Installation. Using P&ID and Isometric for Instrument Marking. Measurement of cable, Cable Route and Cable Tray also Tubing Measurements.

GAMALUX OLEOCHEMICALS (PVT) LTD (SDN). (14 Apr to 12 Sep 2003)

As an INSTRUMENT SUPERVISOR in Gamalux Oleochemical, Fatty Acid Plant on Bin Qasim.

During Construction of this plant I Managed and supervised the all project activity such as cable laying for Motor Control Center Plant Area and Plant Instrumentation control & Automation Devices. Calibration Installation of PI, DPT, TT, LT, Flow meter and solenoid. Hookup Termination Loop testing of Controller and its loop. Installation & Commissioning of Boiler with Descon.

Cable Tray, Instrument Support, Mechanical Support Fabrication and Installation. Using P&ID and Isometric for Instrument Marking. Measurement of cable, Cable Route and Cable Tray also Tubing Measurements.

FFC. JORDAN FERTILIZER COMPANY LTD. (From 02 DEC to 28 Feb 2003)

Worked as INSTRUMENT TECHNICIAN In Fauji Fertilizer Company Jordan. Bin Qasim. I have joined the DESULPHARIZATION PROJECT on contract basis. (www.ffc.com.pk/)

Control Systems:

ABB Distributed Control Systems (DCS).

HIMA Programmable Logic control system (PLC).

ITT Furnace Control System.

In this Construction project I involve in Mechanical Fabrication of instrument stand and their shades. Fabrication and installation of cable tray. Monitor and managed the excavation works for cable laying. Termination, Loop Checking, Hook up and Field Calibration. Regulator seating and Proximity Adjustment of ESD Valves.

KUWAIT OIL COMPANY (24 AUG 1999 to 05 JAN 2002)

Working as INSTRUMENT TECHNICIAN. With Almeer Tech. Services. (ATSCO) For Maintenance Contract in Kuwait. http://www.almeer.com.kw/

Control Systems:

Honeywell TDC 3000.

ABB Advant Controller 400 Series.

Electronic gas Engine Control, Cooper-Bessemer.

Job Description & Responsibilities:

During this job, I was engaged in the following jobs.

Work Shop Experience: Calibration of pneumatic and electronic process control instruments. Cleaning, Servicing assembling, overhauling Pressure Testing of Control valve Actuators such as Glob Valve, Ball Valve, Butterfly Valves. Calibration of PT, FT, TT and LT. Servicing of ESD Valve. Troubleshooting and repairing of microprocessor based control or logic PCB’S.

Field Experience: Maintenance of Wellhead instruments prepared the wellhead for Rig & after that reinstallation of SCADA instruments and equipment. Commissioning of seawater injection wellhead instruments.

Process & Plant Experience: I have work on different sub-division of oil gathering center, like gas condensate recovery (gas compressor) crude dispatch pumps (turbine driven), crude / gas separator and oil heater. Also work on Ruston gas turbine of Booster station.

Prepares schematics, drawings, sketches, and reports to reflect changes or alterations. Perform all schedule preventative maintenance as required by plant computer maintenance management system (CMMS / MMMS).

NATIONAL INSTITUTE OF ELECTRONICS (NIE). (1995 TO 1999)

Worked as SR. TECHNICIAN

Projects:

Artillery Computer System Lab (ACS)

Electronic Instrument Lab (EIL/EIPC)

Job Description & Responsibilities:

ACS LAB: (3 YEARS)

Worked with ACS (hard ware division). Bulk production of Battery computer, Forward observer device and Gun display unit, involve as technician. Start to end user product. Stuffing, soldering, assembling, testing and preparation of mechanical enclosure for performance test. Soldering, Stuffing, Testing, Repair, Maintenance and modification of Switch Mode Power Supply for ACS project.

Schematic & PCB designing using PCAD for all types of Single & Double sided PCB’S.

EIL / EIPC LAB: (1 YEARS)

Established the lab for EIL & EIPC. For practical application using modern equipment and associated peripherals. Functional testing, Hardware & Software installation of Digital Signal Processing (DSP320c 2x, 320c 5x) kit. PIC Emulator (16 c 71, 16 c 84), PIC Simulator and RICE 17A Emulator.

Functional and hardware testing of PLC Mitsubishi Melsec (FXO), IDEC IZUMI (Micro-1), RS 232/RS 422 Converter and Fluke Scope Meter (105B, 99B). Responsibilities including conducting laboratory sessions with the practical application of technology, ensuring the lab equipment is serviceable and setup as required, conducting lab assessment, assisting with marking and effecting simple repairs and maintaining equipment.

BALOCHISTAN GLASS LTD. (1993 TO 1995)

Served as JUNIOR SHIFT ENGINEER (Electronics) in Balochistan Glass Ltd. at hub chowki, Baluchistan.

Control System:

Honeywell Process Control Systems.

Eurotherm Working End burner Control Systems.

Ladla Drew Oxygen monitoring systems.

Job Description & Responsibilities:

Erection maintenance worked on EMHART ETS (Electronic Timing System) machine. Also repairing of its Microprocessor control card. Worked on 120 Ton furnace Temperature, Level & Flow control systems.

Installation and maintenance worked on optical fiber, multi – channel recorders and electronic controllers.

A.C. & D.C. drives for speed control of variable speed motors. Starters for startup of heavy induction motors. Worked on Compressor along with all of its control & protection system. Electrical Booster electrode temperature and current control system.

ANJUMAN FAROOGH-E-ILMO-ADAB.

Darakhshan society malir Karachi, Malir Kala Board Karachi. Participated in the Hard & Software Projects. In 9th Nov. 1992.

COMSATS (COMMISSION ON SCIENCE & TECHNOLOGY FOR

SUSTAINABLE DEVELOPMENT IN THE SOUTH)

Participated in the international workshop on Laser and its industrial

Application. Held on 16th Sep. 1995. At Holiday Inn Islamabad.

Internet, Rock Climbing & Tracking

On Job Training as Trainee Engineer (Jr Shift Electronics Engineer) in the electrical department of Baluchistan Glass Ltd.

Intermediate of Science (Twelve Years Study) in 1991. Major Subject Math’s, Physics and Chemistry.

One year Diploma in Industrial Electronics, from Sindh Board of Technical Education, Karachi in 1993. Petroman Training Institute division of PERAC, Karachi.

Specialized Engineering Program in Electronic Instrumentation Maintenance. Held in Petroman Training Institute, from 23 Oct- 29 Jan 1995.

Short Course on Computer Hardware Maintenance from National Institute of Electronics, Islamabad in 1996.

English Language course from National Institute of Modern Languages, Islamabad from 19 Jan – 22 May 1997.

Short Course on Programmable Logic Controllers (PLC’s, S5-S7) From Usaman Institute of Technology, Hamdard University. On 14 June – 04 Aug 2002.

Advanced Certificate on “Computer Control & Automation with Micro Controller 8051” from Usaman Institute of Technology, Hamdard University. On 14 Apr – 30 jun2003.

Short Course on Primavera Project Planner P3 from Institute of Computer Science & Engineering. From 11th Mar-20th May 2005.

Short Course on AUTOCAD 2D/3D from Institute of Computer Technology, in 2006.

P. L. C Programming Languages in LADDER Diagrams.

Computerized Maintenance Management System (CMMS/MMMS).

Windows & MS Office.

PCAD (Schematic & PCB designing).

Syed Majid Hasan

adbajr@r.postjobfree.com

https://pk.linkedin.com/in/majid-hasan-24a58518

0092 336-***-**** / 0092 306-***-****

Contact this candidate