Resume

Sign in

Designer Civil

Location:
Calgary, AB, Canada
Posted:
March 09, 2020

Contact this candidate

Resume:

Mrs. Suprabha J Nair

***, ********* ***** *****, **

Calgary, Alberta

CANADA, T2X 0C2

adb75n@r.postjobfree.com Phone: 1-587-***-****

Objective

A challenging career opportunity to share my Civil/ Structural design, detail engineering experience,Organizational & project development skills and ability to help the organization to achieve its objectives in the most efficient manner.

Strengths

Summary of Experience

I have been involved in Developing and checking Civil, Concrete and Structural Steel design and detail engineering drawings for EPCM, FEED and DBM projects of up-grader, well pads, Canadian oil sands, refinery, mining and metals and Infrastructure projects.

I have involved in developing & Checking Steel structure drawings, 3D Modeling and 2D drawing extraction from PDS and SP3D for equipment supporting structures (Modular & Stick Built), Modular & Stick Built Pipe racks, G.A for Bridges, Trestles, Conveyor Galleries, Bottom Ash Hoppers, Platforms, Girders, Trusses, Stair towers all kinds of Conveyor Drawings, Development and Details of chutes, bunkers, hopers for Material Handling Systems, Rolling mill building, Bill of Quantity, Estimation and Checking/ Reviewing Fabrication drawings for the structures.

I have involved in developing & Checking in 3D modeling & creation of drawings for Roads, Bridges, Retaining walls, Culverts, Tunnels, Site preparation drawings, Grading /Paving drawings, Open and Closed Drainage system drawings etc. Quantity take off and cost estimate. Surface modeling by using Inroads and Civil 3D

I have been involved in Preparation & Checking Layout drawings, pile & foundation location plan drawings for modular & Stick built Piperacks & equipment structure. Concrete foundations, Precast Pipe racks, Cooling tower basins, Flyovers, Retaining walls, Concrete structures for drainage & Sewerage system, extraction of 2D design drawings from 3D models & Bar bending schedule for concrete structure.

Proficient in the use of AISC, ACI, CISC & CSA structural codes & Standards Maintain and implementation of department & company manual procedures and work instructions to meet the requirement of ISO-9001. Understand & follow health, safety environment polices & guidelines.

I can independently coordinate with other discipline to resolve issues related to design, drafting& modelling and can be trusted to finish the job in scheduled time meeting the quality standards.

Review and approve vendors, contractors, consultants, third party drawings & documents. Preparation and checking of CWP, EWP narratives, Scope change management, man-hour estimation, trends, response to RFI's and Review Shop drawings

I have involved for Civil/Structural Design Supervision, coordination of the design and drafting activities, Training (Technical/Software) to new designers.

Computer skills

Smart Plant 3D, PDS (Framework Plus), Cadworx, Civil 3D, Inroads, SmartSketch, Microstation, Auto CAD, Smartplant Review, Navisworks, Microsoft office.

Achievements

Certificate of recognition from Jacobs Canada for Suncor Well pad Program.

Certificate of recognition from Fluor for the Ma’aden Alcoa, Taneco, Rasgas, Kearl, Syncrude & Horizon Oil Sands Projects.

Prepared and published SP3D bulletin on Fluor Knowledge online in 2011

Qualification

Diploma in Civil Engineering, Kerala, India ( 3 year course)

Career History

Senior Civil Structural Designer/Checker April 2017-Jan 2020 WSP Calgary, AB

Responsibilities:

3D modelling, Drafting & Checking of Steel structure, Foundation & piles on Cadworx.

3D modelling, Drafting & Checking of Roads, Drainage and Ditches, Rough & Finish grading & Cut and Fill Plan on Civil3D & AutoCAD

Some of the Major Projects I Have Been Involved In

Checking Model & Drawing of Pile& Structure for Shell - Gold creek project, Westcoast energy T-South expansion Sanova Compressor Station No.7, Azouzetta Lake Compressor Station No.2.

Prepared and Checked Grading drawing for Veresen- Mid Stream Hythe LR Phase-2, Cenovus energy - Wayne Dalum Oil Battery01-01, Shell- Gold creek 36 well site,,SemCAMS - Smoke Lake Gas Plant, Husky Oil Operations Limited-Sprice Lake North Thermal & East Thermal Central Processing Facility, Duvernay Gas Plant, Trans Canada-Bieseker, Didsbury& Nordegg Compressor stations

Worked in As-Built drawings for Trans Canada -Wooden House Compressor Station, Miekle Rever Compressor Station, UNION GAS- Bright Compressor Station, Dawn compressor Station.

Senior Civil Structural Designer/Checker Nov 2015-Mar 2017

MSDV Limited Calgary, AB

Responsibilities:

Prepared of general arrangement, Rebar drawings and bar bending details for Concrete foundation, Overhead tanks, Retaining wall, Bins etc. on AutoCAD

Prepared Structural steel G.A drawings for commercial and Residential Buildings on AutoCAD

Prepared G.A drawings for equipment supporting structure, Conveyor Galleries, Bins, Hopper and Other Plants Building on AutoCAD

Reviewing fabrication drawings, third party drawings and documents

Civil Design Specialist June 2013-Oct 2015

JACOBS. Calgary, AB.

Jacobs is an engineering consulting firm that provides services to public and private sector clients in a range of industries. The firm services clients in oil sands, oil and gas etc.

Responsibilities:

Preparation & Checking of Piling and Structural steel 3D models & drawings on SP3D & AutoCAD

3D modeling Site Access Road, Rough & Finish Grade, Road crossing on Civil 3D.

Preparation & Checking of Road, Rough & Finish Grade, Road crossing on AutoCAD

Reviewing fabrication drawings for the Modular & Stick built Piperacks & equipment supporting structure.

Review and approve vendors, contractors, consultants, third party drawings and documents.

Projects I Have Been Involved In

Worked in Suncor Well Pads 110,109,112,114,115,117,5D&F.

Senior Civil Structural Designer/ Checker July 2000-May 2013

FLUOR. New Delhi, India.

Fluor is one of the world’s largest publicly traded EPCM, and project management companies. Fluor works with governments and Clients in diverse industries around the world to design, construct, and maintain complex and challenging capital projects.

Responsibilities

Preparation& checking of Plant layout, Steel structure drawings, 3D Modeling and 2D drawing extraction from PDS and SP3D for Modular & Stick built equipment supporting structures & Pipe racks. all kinds of Conveyor Drawings, Development and Details of chutes, bunkers, hopers for Material Handling Systems, Rolling mill building, Bill of Quantity, Estimation.

Preparation and Checking of models and drawings for General arrangement, layout drawings, pile & foundation location plan drawings for modular & Stick built pipe racks & equipment supporting structures, Pile Schedule, concrete structure like Precast Pipe rack, Retaining walls, Flyovers, Bunkers, Hopers. Bar bending schedule for concrete structure. Over bridges, Concrete retaining wall, culverts, ditches, Roads & Earthen dyke wall on PDS, SP3D, Microstation & AutoCad.

Preparation and Checking Roads, Bridges, Retaining walls, Culverts, Tunnels, Site preparation drawings, Grading /Paving drawings, Open and Closed Drainage system drawings, Estimated Civil works quantities, Earth work calculation and Cut Fill maps etc. Surface modeling by using Inroads and Civil 3D.

Review and approve vendors, contractors, consultants, third party drawings & documents. Preparation and checking of CWP, EWP narratives, Scope change management, man-hour estimation, trends, response to RFI's and Review fabrication drawings for the Modular & Stick built Piperacks & equipment supporting structure.

Civil/Structural Design Supervision, coordination of the design and drafting activities, Training

(Technical/Software) to new designers.

Some of the Major Projects I Have Been Involved In

Senior designer/Checker- June 2012 to May 2013 (PDS,Inroads and Microstation)

Ma’aden-Saudi Arabian Mining Co, Aluminium Automotive Sheet Project.

Coordinate with Greenville office

Coordination of design and Drafting activities

Man-hour estimates for scope change, provide input for project progress.

Prepared and Checked Cold Mill Building and Annealing Building, Structure and foundation drawings and Models.

Prepared and Checked Grading and Paving, Drainage drawings.

Design Checker- June 2011 to May 2012, (PDS and Microstation)

Imperial Oil Resources, Kearl Expansion Project - Infrastructure and Offlease

Prepared and Checked Maintenance Support Facility Concrete and Structural Steel Models and Drawings.

Squad checked other discipline drawings

Senior designer/Checker - Mar 2010 to May 2011, (Inroads, Microstation)

Fulcrum Sierra Biofuels, LLC, Sierra Biofuels Plant. (Early EPC stage)

Prepared and checked surface modeling.

Earth work calculation and Cut Fill maps

Checked the Finish grading /Paving drawings

Prepared and Checked Culvert and Storm water drainage drawings

Senior designer/Checker - Mar 2009 to Feb 2010, (Inroads, Microstation, SP3D and Smart Sketch)

Ma’aden-Saudi Arabian Mining Co, Aluminium Rolling Mill Project.

Coordinate with Greenville office

Coordination of design and Drafting activities

Man-hour estimates for scope change, provide input for project progress.

Reviewed Vendor drawings and Squad checked other discipline drawings.

Prepared and Checked Rolling mill Building Structure and foundation drawings and Models.

Prepared and Checked Grading and Paving, Drainage drawings.

Senior designer/Checker - Jul 2008 to Feb 2009 (PDS and Microstation)

OAO Tatneft and OJC Taneco, Grassroots Refinery and Petrochemical Complex

Coordination of design and Drafting activities

Man-hour estimates for scope change, provide input for project progress.

Checked for precast and Structural Steel Pipe rack Foundation and structural steel model and drawings

Senior designer/Checker - Sep 2007 to Jun 2008 (PDS and Microstation)

Total Petrochemicals USA, Deep Conversion Project.

Coordinate with Houston office

Coordination of design and Drafting activities

Man-hour estimates for scope change, provide input for project progress.

Prepared and Checked Models & Drawings for new and revamp Pipe rack steel & foundation

Design Checker- Feb 2007 to Aug 2007 (PDS and Microstation)

Marathon Petroleum Company, Delayed Coker (GME) - UNIT 205

Prepared and Checked Models and Drawings for Pipe racks and Equipment Structures Steel and foundation

Reviewed Vendor drawings and Squad checked other discipline drawings.

Lead Designer- June 2005 to Jan 2007 (PDS and Microstation)

Laffan Industrial City (RLC), Qatar RL (3) Common Offplot Projects Qatar

Checked Pipe rack, Pump Building and Equipment supporting structure drawings and model.

Checked Concrete retaining wall, flyovers, culvert and Ditch drawings

Reviewed Vendor drawings and Squad checked other discipline drawings.

Man-hour estimates for scope change, provide input for project progress.

Checked grading, Paving, Roads, Earthen dyke wall drawings

Checked surface water and oily water drainage system.

Senior Designer/ Checker- Dec 2004 to May 2005 (PDS, Microstation)

Natural Resources Limited -Horizon Oil Sands Project, Utilities and Offsite, Canada,

Checked Pump Foundation, Module Pipe rack Steel and Foundation drawings and model.

Reviewed Vendor drawings and Squad checked other discipline drawings.

Senior Designer- Oct 2003 to Nov2004 (PDS, Microstation)

Dodge Corporation - Cerro Verde Primary Sulfide Project, Peru

Prepared and Checked Concrete and Steel drawings for Grinding ball mill Circuit / Ball mill foundation,

Process utilities and Reagents-Lime system Foundation, Pump foundation, substation building.

Reviewed Vendor drawings

Designer /PCS- Aug 2002 to Sep 2003 (PDS, Microstation)

Imperial Oil ULSD Project-Canada

Worked as a Project computer specialist.

Prepared model and drawings for Pipe rack, Process modules and Equipment supporting structure.

Prepared model and drawings for Pile drawings and Stick built

Reviewed Vendor drawings and Squad checked other discipline drawings.

Lead Designer- July2000 to July 2002 (PDS and Microstation)

Syncrude Canada Ltd. Upgrader Expansion 1 Project - Canada

Coordination of design and Drafting activities

Prepared and Checked Concrete and Steel drawings for pile and Foundation of Module Piperack.

Civil / Structural Designer Sept 1997 – June 2000

Bechtel. New Delhi, India.

Responsibilities:

Created underground piping systems and other services drawings, Rebar drawings of equipment foundations & steel drawings for platforms for Offsite and Utilities Jamnagar Refinery Project, Reliance Petroleum Ltd. – India

Drawing creation for culverts, ditches, grading, Paving, Roads & Earthen dyke wall on Microstation

Some of the Major Projects I Have Been Involved In

Designer- Jan 2000 to Jun 2000 (Frameworks plus and Microstation)

Karachaganak Development Project – Kazakhstan

Preparation of general arrangement, Rebar drawings and bar bending details for Process Instrumentation Building (PIB) 1 and 2 of Sub-station 2

Designer- Designer, Sept 1997 to May 1999 (Frameworks plus and Microstation)

Jamnagar Refinery Project, Reliance Petroleum Ltd. – India

Prepared underground piping systems and other services drawings

Prepared Rebar drawings of equipment foundations

Prepared structural steel drawings for platforms of Merox and Offsite and Utilities Units

Senior Civil / Structural Designer Oct 1995 – Aug 1997

Holtec Consulting India Pvt. Ltd. New Delhi, India. New Delhi, India.

Responsibilities:

Prepared and checked detailed drawings for Cement and Blending silo, Raw material Hopper, Truck unloading hopper etc., Limestone crusher, Cement mill, Pre-heater tower, Cooler house, Raw mill House, Coal mill house.

Some of the Major Projects I Have Been Involved In

Senior Designer- Dec 1996 to Aug 1997 (AutoCAD)

Plant modification of Cement project for Orient Cement Limited – India

Prepared and checked detailed drawings for Cement and Blending silo, Raw material Hopper, Truck unloading hopper etc., Limestone crusher, Cement mill, Pre-heater tower, Cooler house, Raw mill House, Coal mill house

Senior Designer- Apr 1996 to Nov 1996 (AutoCAD)

1.5 Mtpa Cement project for Jordan Cement Factories – Jordan

Prepared and checked detailed drawings for Cement and Blending silo, Raw material Hopper, Truck unloading hopper etc., Limestone crusher, Cement mill, Pre-heater tower, Cooler house, Raw mill House, Coal mill house

Designer- Oct 1995 to Mar 1996 (AutoCAD)

0.6 Mtpa Cement project for Dharani Cement Limited - India

Prepared and checked detailed drawings for Cement and Blending silo, Raw material Hopper, Truck unloading hopper etc., Limestone crusher, Cement mill, Pre-heater tower, Cooler house, Raw mill House, Coal mill house

Civil / Structural Designer Jan 1994 – Sept 1995

Simplicity Projects India Pvt. Ltd. New Delhi, India. New Delhi, India.

Responsibilities:

Prepared and checked G.A for Bridges, Trestles, Conveyor Galleries, Bottom Ash Hoppers, Platforms, Girders, Trusses, Stair towers

Prepared and checked for Fabrication drawings and Bill of Materials for Silos, Bins, Bunkers, Pipe, Bridges, Trestles, Conveyor Galleries, Bottom Ash Hoppers, Platforms, Girders, Trusses, Stair towers, Monorails, Ladders

Some of the Major Projects I Have Been Involved In

2x180 TPD Oxygen plant Raourkela Steel Plant.

G.S.U/L.P.G. Recovery Unit, MRL Nagapathanam – India

Sponge Iron Handling Plant for Nova Iron & Steel Pvt. Ltd., Dagori.- India

Material Handling & Furnace feeding system for Rajinder Steel Ltd.,Raipur. India



Contact this candidate