Resume

Sign in

Electrical Engineer Power Plant

Location:
Fereej Ibn Dirhem, Qatar
Posted:
February 29, 2020

Contact this candidate

Resume:

Operation & Maintenance:

Experience in Troubleshooting, Corrective, Preventive and Breakdown Maintenance of electrical equipment such as 220kV,132kV,66kV GIS and Control Relay Panels,33kV Siemens Switch gear (8BD10), 11kV, 3.3kV ABB Switchgear.

Experience in MCC PANEL with IPCS Motor Management System.

Liaison between project team and site maintenance/reliability and

Process Control and Automation (PC&A)

Performed Control Circuit Wiring and Modification on MCC and PCC as per the original drawing site / Process requirement

Review electrical layouts, SLD, Erection and installation drawing, schemes, Relay settings.

Review Method Statements, Check list, Risk Assessments.

Review of document transmittal sheet (DTS), IEEE standards and O&M specifications.

Project execution and co-ordination with client and Sub-contractor.

Site supervision and inspection, Witnessing for electrical activities

Verify all equipment’s Installation procedures, Test reports meets according to IEC/KAHRAMAA standards

Review contractor/vendor document for client approval.

Review of weekly/monthly progress report.

Review project variation order/contractor SOW documents.

Maintain all approved DTS/test reports/MOM/Documents at project office.

Meeting with contractor to solve project related technical issues.

Issue NCR/IR Commissioning Observation to EPC.

Guide to Maintenance of Transformers, SWGR, MCC AND CONTROL RELAY Panels.

Guide to Maintenance of UPS, Batteries, VFD, Diesel Generators, ATS Panels, Battery chargers.

Testing and Commissioning:

Knowledge & experience of Electrical installation and pre-commissioning &commissioning procedures up to 760kV system.

Witness for Testing and commissioning of 220/132/66 kV Control & Relay panel 33kV Switchgear, 11kV Switchgear, 3.3kV Switchgear and LV MCC’s .

Witness for Testing and commissioning of Numerical, Digital and Eletromechanical Relays, CT, PT and HV & LV Breakers

Testing and commissioning of Protection System for Generators & Checking of Various MW units in Thermal/Hydro power plants

Witness for Testing and commissioning of Power Transformers, VSD, DG Sets

Knowledge of process Electrical isolation to perform safe Electrical tasks.

Leadership skills & able to supervise craft for testing and pre-commissioning activity.

Computer skills including experience with MS Excel, MS Word, Set Route, Teamwork’s, Ebase and Info works in the execution of work assignments.

Knowledge & experience on Electrical control systems as SCADA and DCS

Strong and proven knowledge & experience on electrical protection including protection coordination studies interpretation including curves and relay setting adjustments

Support pre-commissioning activities, such as high and medium voltage testing (circuit breakers, transformers, generators, 33 and 6.6kV systems, capacitors, switch gear, MCC’s and motors), insulation and integrity testing, medium and low voltage switchgear testing, transformer testing, meter & relay testing, motor runs, walk downs, and electrical physical checks.

Execute pre-commissioning activities, such as insulation and integrity testing, transformer energization, protection systems, interlocking/end-to-end testing, redundant systems, related communication systems (SCADA) and walk downs.

Update scoped drawings and databases; whilst coordinating with the Completions Department Turnover Coordinator. This includes input of any required changes into TEAM Works and Set Route.

Applies Electrical testing documentation and procedures and supports management of change, updating and tracking (working in conjunction with the specific document owners).

Identifies Electrical technical issues and raises queries to the department head.

Supports LOTO activities during work preparation and confirms 100% compliance of craft sign on/off.

Works with pre-commissioning system engineers for Site Acceptance Tests, and performance for some systems.

Experience Records:

Working as a Electrical Engineer at M/s. EDF, Doha from January 2019 to till date.

Qatar Power Transmission System Expansion Project Phase XIII substations.

Detailed supervision and check of contractor work

Review and interpret plans, blueprints, site layouts, specifications, or construction methods to ensure compliance to legal requirements and safety regulations.

Ensuring use of latest revision of all Contract Documents, Contract Specifications and engineering reference and Standards.

Ensuring use of latest approved shop drawings for construction at project sites. Guide & direct site engineers as applicable to ensure that PROJECT deliverables fully reflect QA/QC requirements and other specific guidelines

Inspection &Witnessing Various electrical activities testing and commissioning of Protection substation as per the RFI raised by the contractor

Completion of the various forms, documenting the quality and progress of the various sections and areas of the construction work in accordance with the relevant supervision procedure

Ensure the contractor following the work and QA/QC policies of the client

Maintained the Documentation.

Worked as an Electrical Engineer at M/s. WSP, Doha from October 2017 to December 2018.

Qatar Power Transmission System Expansion Project Phase XII substations.

Detailed supervision and check of contractor work

Review and interpret plans, blueprints, site layouts, specifications, or construction methods to ensure compliance to legal requirements and safety regulations.

Ensuring use of latest revision of all Contract Documents, Contract Specifications and engineering reference and Standards.

Ensuring use of latest approved shop drawings for construction at project sites. Guide & direct site engineers as applicable to ensure that PROJECT deliverables fully reflect QA/QC requirements and other specific guidelines

Inspection &Witnessing Various electrical activities testing and commissioning of Protection substation as per the RFI raised by the contractor

Completion of the various forms, documenting the quality and progress of the various sections and areas of the construction work in accordance with the relevant supervision procedure

Ensure the contractor following the work and QA/QC policies of the client

Maintained the Documentation.

Worked as an Electrical Engineer at M/s. Mott MacDonald, Doha from August 2016 to September 2017.

Qatar Power Transmission System Expansion Project Phase XI addendum substations.

Qatar Power Transmission System Expansion Project Phase XI substations.

Qatar Power Transmission System Expansion Project Phase X substations

Detailed supervision and check of contractor work

Review and interpret plans, blueprints, site layouts, specifications, or construction methods to ensure compliance to legal requirements and safety regulations.

Ensuring use of latest revision of all Contract Documents, Contract Specifications and engineering reference and Standards.

Ensuring use of latest approved shop drawings for construction at project sites. Guide & direct site engineers as applicable to ensure that PROJECT deliverables fully reflect QA/QC requirements and other specific guidelines

Inspection &Witnessing Various electrical activities testing and commissioning of Protection substation as per the RFI raised by the contractor

Completion of the various forms, documenting the quality and progress of the various sections and areas of the construction work in accordance with the relevant supervision procedure

Ensure the contractor following the work and QA/QC policies of the client

Maintained the Documentation.

Workedas an Electrical Inspector at M/s. Energo Projekt Entel,Doha from

March 2015 to August 2016.

Qatar Power Transmission System Expansion Project Phase XI substations.

Detailed supervision and check of contractor work

Review and interpret plans, blueprints, site layouts, specifications, or construction methods to ensure compliance to legal requirements and safety regulations.

Ensuring use of latest revision of all Contract Documents, Contract Specifications and engineering reference and Standards.

Ensuring use of latest approved shop drawings for construction at project sites. Guide & direct site engineers as applicable to ensure that PROJECT deliverables fully reflect QA/QC requirements and other specific guidelines

Inspection &Witnessing Various electrical activities testing and commissioning of Protection substation as per the RFI raised by the contractor

Completion of the various forms, documenting the quality and progress of the various sections and areas of the construction work in accordance with the relevant supervision procedure

Ensure the contractor following the work and QA/QC policies of the client.

Maintained the Documentation.

Worked as a Project Manager in “Energy Automation Retrofit Projects” at M/S. Schneider Electric Infrastructure Ltd Mumbai India from February’2012 to February 2015.

Leading Team for preparing electrical schematic drawings from Single Line diagram and protection logic diagram against specification for sub-station automation Protection Control & Relay panels of Power Transmission and Distribution network, Creation of General Arrangements, Preparing Bill of Material against specification and design requirements and preparation of production documents.

Comprehensiveproblem solving abilities, Design modification as per site conditions to complete commissioning, ability to deal with people diplomatically, willingness to learn, team facilitator.

Site Allocation, Engineer deputaion, Material management,KOM with Customer and site Coordination.

Worked as a Project Engineer in “Testing and Commissioning of Transmission and Distribution

Lines Protection Relays and C&R Panels “at AREVA T&D INDIA Ltd, Chennai. India from

May’2008 to January 2012.

Testing & commissioning of E-Bop projects.

Testing & commissioning of HV/LV Substations (Indoor, Outdoor) upto 420 KV.

Testing and commissioning of numerical relays(ABB,AREVA,SIEMENS,ALSTOM etc.)

Inspecting, Testing and pre-commissioning / overall commissioning activities.

Relay co-ordination (setting and calculation of the relay) and documentation.

Preparing drawing modification,updation and documentation .

Worked as a “Testing Engineer” in C&R Panel division at “ABB Ltd” Peenya Bangalore. India form June 2005 to April 2008.

Testing & commissioning of Transformers upto 750 MVA.

Testing and commissioning of 132KV, 220KV, 400KV line protection control and relay panels.

Handling all conventional and numerical testing kits .

Thorough knowledge of projects, field engineering, trouble shooting of electrical equipments.

Scheme checking: Functional & Interface test / Trip Interlock test / Commissioning Scheme check and Site drawing markup copies and preparation of test reports.

International Experience 2008 to 2010

Customer:400 KV GCCIA Project

Country: Doha, Qatar.

Activity - Testing and Commissioning of P442/P443.relays for 2 various outgoing transmissionlines, P633 & P634 relay for Transformer differential protection,P544 relay for line differential protection . Backup Over current and Earth fault protection relays.

Customer : KAHRAMAA. PHASE VIII EXPANTION Project.

Country : Doha, Qatar.

Activity - Testing and Commissioning of P442/P443.relays for 2 various outgoing

Transmission lines, P633 & P632 relay for Transformer differential protection,P544

Relay for line differential protection.

Area of Interest

Project management and co-ordination.

Supervision, Monitoring &witnessing and Fault analyzing in various Electrical activities as an Electrical Consultant Engineer.

Erection, Installation, Testing and Commissioning of Various EHV equipment

Operation and maintenance of EHV Substation

Projects handled in INDIA (Site Visits)

Customer :POWER GRID Durg Raipur

Country : INDIA

Activity – 765/400KV One and Half Breaker Scheme Busbar Protection relays Testing and commissioning.

Customer :POWER GRID GudurNellor

Country : INDIA

Activity – 765/400KV One and Half Breaker Scheme Busbar Protection relays Testing and commissioning.

Customer :NTPC. Korba

Country : INDIA

Activity - Testing and Commissioning of Micom P343 P141 and P632 relays for 2 various 50MW Generator and Transformer differential protection, P444 relay for line distance protection and Micom DoubleBusbar Protection. Backup Over current and Earth fault protection relays in various Voltage level distribution Feeders.

Customer :NTPC. Barh

Country : INDIA

Activity - Testing and Commissioning of Micom P343 P141 and P632,P633 relays for 3 various 50MW Generator and Transformer differential protection, MicomP444 and Micom P437 relay for line distance protection for various 4 Transmission Line Feeders.

Customer :POWERGRID.Madurai.

Country : India.

Activity-- Testing and Commissioning of P442/Siprotec 7SA522.relays for 2 various outgoing transmission lines, and auto reclosing scheme for two 400 KV Line bays.

Customer : BHEL. BTPS 400kv SS .Bellary, Karnataka.

Country : INDIA.

Activity – Testing and Commissioning of P442/P437.relays for 2 various outgoing transmission lines and P633 relay for Transformer differential protection.

Customer : BHEL. NPCIL.RAPP Kota.Rajasthan

Country : INDIA

Activity -- Testing and Commissioning of P442/P437.relays for 1 transmission line, and P633 relay for TEE(Three Line) differential protection

Customer : VATECH-KPCL.SHIMSHSPURA.Karnataka.

Country : INDIA

Activity – Testing and Commissioning MicomP343 relays for Generator protection, P632 relays for GT Protection, P441 relays for Line Feeder Protection for three various outgoing lines. And P122 relay for UAT protection.

Customer :KPTCL.Hassan.Karnataka

Country : INDIA

Activity – Testing and Commissioning of P430Crelay for 66Kv transmission line and P632 relay for 66/11Kv.8MVA Transformer differential protection P120 relay for backup OC/EF Protection.

Customer : PGCIL.Lucknow.UttarPradesh.

Country : India

Activity: Testing and Commissioning of Siprotec 7SA52/ REL 511relays for 4 lines main1/main2Line protection and all C&R Panel system testing.

Declaration

I hereby declare that all the statements cited above are correct to the best of my knowledge and belief. I also understand that any discrepancy found in the above information will render me liable for cancellation of candidature.

Date : 01.02.2020

Place: Doha (F.S.EdisPaul)

Contact Details

Present Address:

Villa No 19 Street 428, Zone 90

Wakra, QATAR

Phone:

+974-********

Email: adb15y@r.postjobfree.com

Personal Details

Father’s Name: FRANCIS

Nationality:Indian

Religion:R.C. Christian

Date of Birth :09th Dec 1981.

Marital status :Married

Driving Skills

Driving License-Manual&Auto

Issued by: Qatar& India

Passport Details

Passport No: Confidential

Issued place : Madurai,

Date of Expiry : 23.11.2024

Languages

English, Tamil, Hindi and

Malayalam.

Electrical Engineer

Career Objective

To obtain a challenging and rewarding position where my Electrical Engineering, Power/ Energy/ Automation/ Manufacturing Industry,Oil &Gas Plant onshore Operation & Maintenance, Testing &Commissioning skills and professional experience aspiring me to achieve the corporate objectives and stepping towards the vision of the company and personal development. To work with dedicated, enthusiastic and sincere attitude for accomplishment of company’s mission and achievement of client satisfaction.

Skill Highlights

Project management

Power Transmission and Distribution.

Power Plant

Testing&Commissioning

Operation&Maintenance

Construction

Experience

Having around 15 years’ experience on Electrical Testing, Commissioning and Maintenance activities in the field of Power Generation,Transmission Distribution and Power Plants. Conversant with all types of Electrical Equipment’s, Protection and Control System involved.

Have extensive knowledge on International Electrical Codes, IEEE, BS, Specifications & Standards.

Presently working as an Electrical Engineer for EDF (Technical Consultant in KAHRA MAA Substation Projects) in Qatar.

Education

Degree: Electronicsand Communication Engineering.

Computer literacy:Microsoft Office- Professional

Course and Certifications

HSE Induction Course, H2S Awareness and Escape.

Training courses attended Substation and Automation System.

F.S.EDIS PAUL

Curriculam Vitae



Contact this candidate