Engineer Mechanical
Resume:
NIEL CACHUELA
Address: Plot. ***, Al Yasi Bldg. Khaladiya st. Abu Dhabi, U.A.E.
Email Add: *******@*****.***
Mobile : 009***********
CAREER OBJECTIVES: To be able to obtain a job that gives me the opportunity to apply my knowledge and competencies as a professional job that can give progress in life work.
COMPETENCY SKILLS: Should be capable of safe maintenance, capable to attain trouble shooting of industrial machinery, electrical and mechanical in actual manner, repair of machine parts to ensure maximum production quantity and quality while supporting goals and objectives of the company.
WORK EXPERIENCE:
Maintenance Engineer/EHMS In charge- February 12, 2012 up to present
Architectural Rebar Factory
ICAD 1-63(B9) Mussafah, P.O. Box: 39967, Mussafah, AbuDhabi-UAE
DUTIES AND RESPONSIBILITY:
Review the operation of factory equipment and system constantly; to minimize unplanned downtime and anticipate solving problems in a timely manner.
Daily meeting with the maintenance team and checking pending work if any and prepare daily program.
Inspect & Check for major breakdown and perform the maintenance work under direct supervision.
Makes recommendations for improving operations and modifying any part with an upgrade one which is long lasting and cost effective.
Co-ordinates with other personnel & departments concerning time schedule for preventive maintenance, spare parts needed, additional work crew from other unit.
Arrange critical spare parts for all machineries according to the specifications and requirements.
Handling complaints and arrange with the maintenance team to do their job to determine defects & extent of work to be done.
Do calibration performances of gauges make use in hydraulic and pneumatic system accordingly as equipment require.
Preparing an enquiry and quotation for all spare parts urgently needed in the machines also materials require inside the plant involving in maintenance job.
Well experience in maintenance of hydraulic pumps, high voltage motors, gear boxes, pneumatics control, control panel board with PLC, all types of overhead crane and any industrial machineries.
Appointed and Authorize as acting safety officer of the company to follow the EHSMS (Environment Health & Safety Management System) under provision of Zone Corporation in Mussafah
Trouble shooting and Repairing of OSCAM, STEMA PEDAX, MEP, EVG, DEXTRA THREADING, SCHNELL MACHINES and OMES machinery and as related in industrial machinery. ( Machines is made in ITALY, AUSTRIA & DENMARK
Management Representative (MR) of OH&SAS18001:2007 and (EHSMS) Envoronment Health Safety Management System.
Manage and Implement the Integrated management system manual is based on the requirements of OHSAS 18001:2007 and ISO 14001:2004 and details the specific controls established, documented and maintained.
Maintenance Engineer- October 12, 2009 to January 10, 2012
National Steel Company (A member of Lootah Group of Companies)
P.O. Box. 568 ICAD III, Mussafah, Abu Dhabi, U.A.E.
DUTIES AND RESPONSIBILITY:
Supervise and participate in conduct of studies to establish viability change in consumable as lubricating oil, grease lube, and fuel activities terms of equipment performance, effects in operating cost and cost implementation as well as determination of potential problems.
Inspect and check completed job and test them for their performance.
See to it that proper guidelines as to safety, safekeeping, cleanliness, discipline and others are followed by subordinates.
Receive all incoming repair jobs, determines defects and extent of work to be done. As necessary; prepares spare parts for guidance of repair crew and list done work to be done and specification of materials to be used.
Ensure that all maintenance work is carried accordance with safety procedures and plant operational requirements.
Provide on the job training to operators to equip them with the necessary skills.
Recommend and participate in studies and test process of product improvement and skills enhancement.
Arrange the maintenance program of Oscam shear line machinery for reinforcing steel as per line.(Machines is made in Italy)
Repairing & trouble shooting of OSCAM, STEMA PEDAX, MEP, EVG, DEXTRA THREADING MACHINES and OMES machinery and as related in industrial machinery. ( Machines is made in ITALY, AUSTRIA & DENMARK)
Repairing & trouble shooting all types of Over head Crane.
Supervise installation & Commissioning of Shearing line machine, Stirrups, Automatic Double bender machines also additional equipment for process upgrading or revision.
Makes a regular on all work station to check on progress of work. As, necessary assist subordinate on more complex tasks, demonstrate new procedures or repairing techniques and resolving major problems.
Maintenance Engineer- March 10, 2006 up to July, 2008
Madar Steel Industries (A member of Al Fozan Group of Companies)
P.O. Box.117354 Dubai Investment Park, Green Community, Dubai, U.A.E.
DUTIES AND RESPONSIBILITY:
Participates in the formulation of adequate for guidelines for establishing work priorities to given proper preventive maintenance in terms of breakdown.
Supervise and participate in conduct of studies to establish viability change in consumable as lubricating oil, grease lube, and fuel activities terms of equipment performance, effects in operating cost and cost implementation as well as determination of potential problems.
Inspect and check completed job and test them for their performance.
See to it that proper guidelines as to safety, safekeeping, cleanliness, discipline and others are followed by subordinates.
Receive all incoming repair jobs, determines defects and extent of work to be done. As necessary; prepares spare parts for guidance of repair crew and list done work to be done and specification of materials to be used.
Ensure that all maintenance work is carried accordance with safety procedures and plant operational requirements.
Provide on the job training to operators to equip them with the necessary skills.
Recommend and participate in studies and test process of product improvement and skills enhancement.
Arrange the maintenance program of Oscam shear line machinery for reinforcing steel as per line.(Machines is made in Italy)
Repairing & trouble shooting of OSCAM, STEMA PEDAX, MEP, EVG and OMES machinery and as related in industrial machinery. ( Machines is made in ITALY, AUSTRIA & DENMARK)
Repairing & trouble shooting all types of Over head Crane.
Supervise installation & Commissioning of Shearing line machine, Stirrups, Automatic Double bender machines also additional equipment for process upgrading or revision.
Maintenance Engineer/Mechanical Engineer- May 25, 2002 to November 25, 2005
Abu Dhabi Building Materials (BILDCO)
Mussafah Industrial Park, Abu Dhabi, U.A.E.
DUTIES AND RESPONSIBILITY:
Organized and schedule work activities related to the repair, overhauling and rehabilitation of machinery, equipments and sub-assemblies and implementation of preventive and corrective maintenance.
Evaluates schedule of daily work activities, manpower and such submitted by foreman, taking note of priorities in terms of instruction received or urgency determined on the basis of plant requirements.
Allocate work assignment to subordinates on basis of fair distribution work load as well as individual competence for specific job assignment.
Receive all incoming repair jobs, determines defects and extent of work to be done. As necessary; prepares spare parts for guidance of repair crew and list done work to be done and specification of materials to be used.
Reviews engineering specification, workability and economy for particular application on hand and transmit to subordinates instruction on work methods.
Makes a regular on all work station to check on progress of work. As, necessary assist subordinate on more complex tasks, demonstrate new procedures or repairing techniques and resolving major problems.
Inspect and check completed job and test them for their performance.
See to it that proper guidelines as to safety, safekeeping, cleanliness, discipline and others are followed by subordinates.
Arrange the maintenance program of Oscam shear line machinery for reinforcing steel as per line.(Machines is made in Italy)
Repairing & trouble shooting of OSCAM, STEMA PEDAX, MEP, EVG, LENTON THRADING MACHINE and OMES machinery and as related in industrial machinery. ( Machines is made in ITALY, AUSTRIA & DENMARK)
Repairing & trouble shooting all types of Over head Crane.
Supervise installation & Commissioning of Shearing line machine, Stirrups, Automatic Double bender machines also additional equipment for process upgrading or revision.
Maintenance Engineer/Mechanical Engineer- January 15,1999 to January 10, 2002
Tripod Technology Corporation (Member of Hitachi Japan Corporation)
21# Kung-Yeh 5th road, Ping-Jen Industrial Park, Tao-Yuan, Taiwan, R.O.C.
DUTIES AND RESPONSIBILITY:
Organize & schedule plant maintenance operation to avoid delays and enable to attend to all service request/complaints from various section/department of the plant within area of responsibility.
Determines status of current repair work & maintenance work, nature & extent of repair work for pending request.
Findings & schedule routine & non-routinely work activities required.
Assign work load to subordinates staff to meet work load requirements passing on detailed information and specific instruction regarding work, if necessary.
Trouble shooting & repairing PCB (printed circuit board) automatic drilling machine & CO2 laser drilling machine.
Calibrating & repairing the router machine accordingly thru the sizes of the PCB require by the customer.
Coordinates with the Personnel & Departments concerning time schedule, spare parts needs, additional work crew from other unit if require, arrange the specification for effective maintenance of equipment & machinery.
Participate in formulation of standard work procedure in servicing & maintenance of equipment and machinery.
Directs, Supervise and coordinates through foreman on daily maintenance and repair activities in his area.
Support management decisions and carry out agreed plans.
Asst. Maintenance Engineer/Electro-Mechanical Supervisor- May 20, 1996 to May 30, 1998
Molex Taiwan Limited.
100-3, Shia-Kwei-Rou-San, Tamsui, Taipei Hsien, Taiwan
R.O.C
DUTIES AND RESPONSIBILITY:
Makes regular rounds of different work areas and check programs & performance of subordinate to make sure that schedule are meet, Standard are satisfied & quality is best possible.
Responsible of repairing & Trouble shooting of all machine shut down in long time period.
Responsible in trouble shooting electrical components and panel board of insertion socket 7 machine.
Responsible in trouble shooting electrical components and panel board of insertion simm machine.
Check machine condition & correctness of machine setting through ocular inspection of panel chart, counter gauge and indicator and filling in proper place for future reference.
In charge in repairing & trouble shooting of plastic molding housing machine using in computer components connections.
Calibration & setting the pneumatic valve though the movement of double acting pneumatic cylinder of the machineries.
Distribute work assignment and relay job instruction to section foreman attaining the break down equipment of machines.
Process Engineer/ Maintenance Engineer – Sept. 1994 to Sept. 1996
Royal Oil Product Incorporation.
J.P. Rizal, Makati City, Philippines
DUTIES AND RESPONSIBILITY:
Monitor the daily oil process schedule according to the customer demand.
Verify the process procedure of oil and arrange to the operator.
Monitor per hour sample of oil to get a standard specification require.
Arrange the sample of oil as to check in QA/QC as per viscosity for finish product.
Attend immediately to major equipment breakdown, where necessary take over to make detailed and through analysis of defect and carries out repair work.
Advises and unit supervisor in production department of requisite emergency measure and extended effects of the breakdown on manufacturing operation.
On continuing basis, reviews and evaluates equipment performance and affectivity of established preventive maintenance program.
Recommended appropriate revision of work schedule and preventive maintenance program.
Develops and implements safety policies and procedures recommends necessary to protect labor and production.
Prepare and submit requisite reports to superior covering nature of work, status of repair and maintenance activities.
Keep and see to it that equipments and other company properties are properly care.
Performs other duties and responsibility common to all supervisors are listed in separate sheet.
Responsible in the maintenance and repair of Boiler, high pressure pump & condenser also related oil processing machineries.
Repairing all Electro mechanical equipments & trouble shooting of control panel of the machine.
EDUCATIONAL BACKGROUND:
COLLEGE : Western Institute of Technology
General Luna Street, La Paz, Iloilo City, Philippines
COURSE : Bachelor of Science and Mechanical Engineering
YEAR : 1993
SECONDARY : Iloilo National High School
General Luna Street, La Paz, Iloilo City, Philippines
YEAR : 1985
PRIMARY : Graciano Lopez Jaena Elementary School
Huervana Street, La Paz, Iloilo City Philippines
YEAR : 1981
SPECIAL TRAINING /SEMINAR
1.Efficient Utilization of Steam
Conducted by WIT Mechanical Department
January 21, 1992 at WIT Audio Visual Hall
La Paz, Iloilo City
2.Efficient Utilization of Steam
Conducted by WIT Mechanical Department
January 21, 1992 at WIT Audio Visual Hall
La Paz, Iloilo City
3.Basic Operation & Maintenance of Oscam Machinery
Conducted by OSCAM S.p.a.
November 15, 2007 at Assembly Plant
10127 Torino Italy, Via Canelli, 104/106
4.General Health & Safety Awareness
Safety inspection Report Writing
Risk Assessment
Safe Use of Lift Trucks
Conducted by ETA Consultancy ( Mr. Wasyl Terych
May 19, 2007 at Madar Conference Hall
5.Maintenance at Automatic Bending Machine
Conducted by Engr. Gluseppe Polani
The Company M.E.P.spa
Type Mini Syntax mat: 181603
February 15, 2010 at Lootah Group Factory
PERSONAL DATA:
STATUS : Married
SEX : Male
PROVINCIAL ADDRESS : Balagtasin 2nd, San Jose, Batangas, Philippines
RELEGION : Roman Catholic
PASSPORT NO : EC7583922
I hereby certify that the above information is true and correct to the best of my knowledge and belief.
Applicant Signature
Contact this candidate