Auto Cad Engineering

Samir Banerjee

India

Mob: +91-908*******

Email: *****************@*****.*** / **************@**********.***

Experience Summary:

·15 years of experience as an AutoCAD Draftsman and knowledge of Auto Cad Civil 3D

·Gulf experience (Abu Dhabi and Saudi Arabia)

·Draftsmanship course from Bengal Engineering College

·Committed and Motivated

Key Qualification:

Trained Cad Designer, have fifteen years of professional experience in preparation different type of drawings on Auto Cad (2014 & 2015) like flyover, bridges, Metro project, national highway, Municipality projects, roads and highways, infrastructure, residential and commercial etc.

During this period, I was responsible for preparation of drawings on Auto Cad, such as structures general arrangement drawings, long section, pile foundation, pier, abutments, box girder, diaphragm, column, footing, beam, structural layout.

Proficient in reading and understanding design drawings, development of structural layout plan. R.C details of pile, pier and pile cap drawings. Prepare different type of site drawings.

Experience in preparation of drawings of roads and highway such as plan and profiles, contours, centre line setting out, layout, setting out and existing survey and existing services.

Knowledge to prepare alignment, plan, and co-ordinate point table, surface, contours and cross section etc. on civil 3D.

Knowledge of building plan and sections and reinforcement details of beam column foundation and details of stair case.

Prepares drawing list, printouts, plot files, pdf and copies of drawings for client, sub-consultant, and contractor. Co-ordinates with other departments/sections and engineers for drawings related issues.

Provide accurate shop drawings, track all drawings related to jobs in their specific folders

and maintain that they are available in the database.

Keep drawings consistent within drafting department

Has ability to coordinate the work with other design disciplines and with clients.

Use drawing layers on Auto Cad that are consistent with the company's standards and perform all duties in a safe manner.

Professional Experience

Feb. 2019 - Present

Organization : Larsen & Toubro

Client : MAHARASHTRA STATE ROAD DEVELOPMENT

CORPORATION LTD

Job Title : Sr. Auto Cad Draftsman

Location : Mumbai, India

Projects : CONSTRUCTION OF ACCESS CONTROLLED NAGPUR -

MUMBAI SUPER COMMUNICATION EXPRESSWAY.

Scope of Responsibility:

ØGeneral Arrangement drawing for canal bridge

ØFoundation layout and reinforcement details for canal bridge

ØReinforcement details of abutment.

ØReinforcement details of pier & pier cap.

July 2018 – January 2019

Organization : PARK PROJECTS CONSULTANCY (P) LIMITED

Client : NCR (North Central Railway)&DFCC(Dedicated Freight Corridor

corporation

Job Title : Sr. Auto Cad Technician

Location : Delhi, India

Projects : ROB at LC 561 on Delhi-Mumbai Railway line, Construction of ROB in Liew of level X-ING No.23C & X-ING No. 27C, Structural design of RCC Box (R.U.B – L.C. No. 19 and Detailed Design and Drawing of Sumber Station Yard, J&K etc.

Scope of Responsibility:

ØGeneral Arrangement drawing, GA of pier & pier cap

ØReinforcement details of pile and pile cap

ØGeneral Arrangement drawing of ROB

ØWing wall details along with reinforcement.

ØLayout plan & thrust bed details of RCC push box under railway track

ØDimension and reinforcement details of twin cell bridge box and RCC push box under

railway track

September 2017 to June 2018

Worked as Self-Employed

August 2016 to May 2017

Organization : BOSE ENGINEERING & CONSULTING SERVICES

Job Title : Auto Cad Technician

Location : Sydney, Australia

Projects : Commercial Development, 100 Macquarie Street, Liverpool

Scope of Responsibility:

ØPreparation of General Arrangement drawings.

ØEditing all types of architectural drawing, creating shop drawings.

ØPreparation of building plan and section details & Creating standard drawings etc.

ØMaintain of drawing standard of Pen thickness, PDF files, and X-Ref files. Keep all drawing files updated, establish and maintain proper files and back-up records of documents.

ØUsed Auto Cad 2015

November 2012 to Many 2016

Organization : AECOM

Client : BACS

Job Title : Designer Draftsman

Location : Riyadh, Kingdom of Saudi Arabia

Projects : Riyadh Metro Project

Projects : Riyadh Metro Project (RMP) comprises six Metro lines in the city of Riyadh, which are intended to form the backbone of the future Riyadh public transport network.

Line 1 (Blue line): A north-south line along the Olaya-Batha Corridor, to extends over a length of approximately 38 Km and features 22 stations, in addition to 4 transfer stations.

Line 2 (Red Line): An east-west line along King Abdullah Road, to extends over a length of approximately 22 Km and features 14 stations, in addition to 3 transfer stations.

Scope of Responsibility:

ØPreparation of Concept and detail design drawings for all kind.

ØPile foundation layout, pier and R C detailing of pile cap along with sections.

ØSection and details of box girder, abutment, approach slab

ØPreparing Plan, profile and typical sections and sketch drawings.

ØModify all types of drawing, creating shop drawings.

ØMaintain all the PDF files, and X-Ref files. Keep all drawing files updated, establish and

maintain proper files and back-up records of documents.

Client : ARAMCO

Location : Jeddah, Kingdom of Saudi Arabia

Projects : Baish Corniche and Fishing Port - Jazan Economic City

Baish Corniche is located at the coast of Jazan Economic city, which consist of various Structures like Mosque, Restaurant, Restrooms, Life Guard, Coast Guard, Police Station, Kiosk and Coffee Shop.

Scope of Responsibility:

ØPreparation of foundation plan, floor plan, wall layout, and reinforcement details of slabs,

column, beam and foundation.

ØReinforcement details of stair case

ØTo discuss about the work with client and other design disciplines.

ØCreating standard drawings etc.

Projects :Middle Ring Road (MRR)-Jeddah Strom Water Drainage Program, Jeddah- KSA.

Middle Ring Road (MRR) is a 94 km highway which is a part of "Jeddah Strom Water Drainage Program (JSDP)". )". MRR will contribute to enhance Jeddah as a vibrant city, sustainable in economic, social and environmental terms. MRR consists of five sections and 8 interchanges, also MRR crosses some local roads.

Scope of Responsibility:

ØPreparation of structures general arrangement drawings, longitudinal section, pier, pile

foundation, abutment etc.

ØSection and details of I-beams, setting out data, approach slab

ØReinforcement details of pile cap and sections.

ØMeeting with client to discuss about the scope of work and with other design disciplines.

ØModify all types of drawing, creating shop drawings etc.

ØUsed Auto Cad R- 2012,2013

August 2009 to September 2012

Organization : Diwi - Consult (Emirates)

Client : Al Ain Municipality

Job Title : Auto Cad Draftsman

Location : Abu Dhabi, (UAE)

Projects : Project of Al Ain Municipality, internal roads at various

locations in Al Ain stage17.

Infrastructure development in residential areas which includes Road works, Storm water, etc in various places in Al Ain like Al Faqaa, Sweihan, Masoudi, Al Hayar-6 & Al Yahar 7 etc.

Scope of Responsibility:

ØPreparation of General arrangement drawings, layout, road profiles, contours, centre line setting out, setting out, existing survey, road sings and markings, existing services and storm water drawings etc.

ØPreparing Alignment, points, surface, contours and cross sections etc. on Civil 3D

ØCreating standard drawings etc.

ØUsed Auto Cad R-2007, 2010

September 2007 to May 2009

Organization : Cansult Maunsell (AECOM) – Maunsell Consultancy Services Ltd

Client : ALDAR

Job Title : Auto Cad Draughtsman

Location : Abu Dhabi, (UAE)

Projects : AL – Raha Beach Development Project

The project of 11 km, which develops Road works, Flyover, Interchanges, infrastructure

residential, commercial, shopping, tourism, recreation and public spaces.

Scope of Responsibility:

ØPreparation of location plan, structural general arrangement drawings, site drawings and

shop drawings.

ØGeneral Arrangement drawings of pile and pile cap and reinforcement details of sections

and abutment. Reinforcement details of manhole.

ØModify all types of drawing maintain of drawing standard of Pen thickness, PDF files, X-

Ref files and maintain all the drawing folders. Etc.

ØUsed Auto Cad R-2006, 2007

September 2006 to September 2007

Organization : The Louis Berger Group, INC. – Asian Operations

Job Title : Structural Auto Cad Draughtsman

Location : Gurgaon, (India)

Projects : Upgrade of Jamal Abdul Nasser Street, Jahara Road and Ghazali Street

Scope of Responsibility:

ØPreparation of drawings for Structural Layout. RC details of pile cap

ØSegment Plan Layout and with drainage system, median barrier details, Knowledge of

BBS

ØGeneral Arrangement drawings Foot Bridges.

ØUsed Auto Cad R-2004, 2006

September 2003 to March 2005

Organization : Holtec Consulting Private Limited

Job Title : Auto Cad Designer

Location : Gurgaon, (India)

Projects : Consultancy services for detailed design and engineering of six lanes access controlled Taj Expressway between Greater Noida and Agra. Feasibility Studies and Inventorisation of NH-11A Extension (Dausa-Lalsot-Kathun Road) in Rajasthan for its improvement to National Highway Standards (Length 81Kms.)

Scope of Responsibility:

ØPreparation of General arrangement drawings for structures. Prepare of top slab plan

and bottom

ØPreparation of General arrangement drawings of layout, and center line setting out,

existing, Survey and existing services etc.

ØPreparation of cross-sections (existing & proposed) and other detailed drawings.

ØUsed Auto Cad R-2002, 2004

December 2001 to August 2003

Organization : L & T- Ramboll Consulting Engineers Limited

Job Title : Auto Cad Draughtsman

Location : Delhi, (India)

Projects : Dwarka Dwar Flyover Project.

Scope of Responsibility:

ØPreparation of GAD of pile foundation layout, pile cap and pier.

ØPreparation of numeration and R.C details of pier, pile and pile cap drawing, sections.

ØPreparation of superstructure drawings, box girder, abutment details.

ØModify all types of drawing and maintain the Pen thickness of drawing. PDF files, X-Ref

files.

ØUsed Auto Cad R-14, 2002

Educational Qualifications:

ØHigher Secondary from W.B.C.H.S.E

ØMadhyamik from W.B.B.S.E

Professional Qualification:

ØDraftsmanship course from Bengal Engineering College

ØAuto Cad course from LCC

ØKnowledge of Civil 3D

ØProficient in MS office.

Contact this candidate