Sign in

Instrumentation Engineer with 13 + years of experience.

Kuwait City, Kuwait
1200 KD
November 02, 2019

Contact this candidate




Oil & Gas-Instrumentation

Contact No: +965-********, +919*********;

Mail ID:


Hard working professional having experience in handle large scale project targeting new challenging assignments in Commissioning & Maintenance with an organization repute. Technical Qualification:

Degree Bachelor of Engineering(B.E)

Discipline Instrumentation Engineering

University Anna University

Class & Pass out year First Class / 2005

Professional Experience:

I have 13 Years and 3 Months of hands-on experience in the field of Construction, Loop checking, Commissioning & Maintenance of wide range of Instrumentation equipment’s in Refineries, Oil & Gas sector. Like field sensors, transmitters, valves, gauges, DCS, PLC, SCADA, ESD, F&G systems, MCMS system & Analysers.

Worked in Clean Fuel Project (CFP) of Mina Al Ahmadi Refinery (MAA) KNPC, KNPC- Ethylene Recovery Plant Project, MOIP Project, KOC-Pipe line Project, Qatar-SHELL Pearl Gas to Liquid project, Air liquid Oxygen Plant Kuwait.

Specialization in Loop Checking, pre-Commissioning, Commissioning &Maintenance.

Experience in Installation &Calibration of Instruments

Have Experience on HART & Foundation field bus systems

PTW holder in KNPC, KOC & Shell projects.


Company Name : KCC Engineering and Contracting Company, (KCCEC). Job profile : Instrument Engineer

Work tenure : January 2017 to Till Date.

ProjectSite:Clean Fuel Project (CFP) of Mina Al Ahmadi Refinery (MAA) KNPC. Responsibility:

Checking, Cause & Effect/Logic checking & Implement as per process control narrative. Loop Checking, Commissioning, Trouble shooting & Maintenance. Verification of drawings like Instrument datasheet, Instrument index, P&ID, Hook-up drawing, Instrument loop drawing, Cause & effect, Wiring Diagram, GA drawings etc as per KNPC Standard. Company Name : Hyundai Engineering & Construction CO. LTD Job profile : Instrumentation Engineer

Work tenure :Oct 2009 To Dec2015

Project Site: Installation of Low Sulphur Fuel Oil (LSFO), Fuel Gas and Gas Oil Pipelines from MAA to SABIYA and DOHA Power Stations. Client: KOC Kuwait. Project Site:Qatar Shell GTL (Gas to Liquid) Project, Qatar. Client: Qatar Gas- Shell, Qatar. Responsibility:

In charge for Loop Checking, functional test & Commissioning. Review of drawings, Co- ordinate with vendors, client and inter disciplines for execution of job. In-charge for installation of control room panels & consoles. Attended SAT. Attending punch list. In-charge for Loop checking & commissioning crew. Loop folder preparation. Trouble shooting & Maintenance during warranty time.

CompanyName :ALMEER TECHNICAL SERVICES CO. W.L.L. KUWAIT Job profile :Engineer (Instrumentation)

Work tenure :November 2008 To August 2009

Project Site: Modernization of Obsolete Instrumentation Project (MOIP Phase-1), Mina Al Ahmadi Refinery, Kuwait


Calibration, Loop Checking, Trouble shooting and Commissioning. Assisting vendors for SAT. Functional testing & Punch Clearing.

Company Name : Integral Services Co. WLL, Kuwait

Job profile :Engineer (Instrumentation)

Work tenure :January 2008 To November 2008

Project Site: Ethane recovery plant project in KNPC Mina Ahamadi Refinery Kuwait through Hyundai Engineering & Construction CO. LTD. (Kuwait) Project Site:Shuaiba Oxygen Air Liquid Oxygen plant, Kuwait. Responsibility:

Installation of panels, consoles, instruments, Loop checking, Functional checking and commissioning. Trouble shooting and punch clearing. Company Name : Binani Zinc Ltd. Cochin

Job profile : Maintenance Engineer

Work tenure : February 2007 To January 2008


Maintenance of all field instruments, DCS, PLC, ESD system engaged in the corrective, preventive & periodic maintenance of field instrument, DCS, PLC & SCADA Systems. Replacement of conventional transmitters to HART Devices. Company Name :Revelation Automation. Cochin, India. Job profile :Service Engineer (Instrumentation)

Work tenure :July 2005 To February 2007


Supply, installation and servicing of field instruments like sensors, transmitters & controllers

& valves.

Systems Handled:

DCS System: Foxboro I/A series: Centum CS3000 –Yokogawa, EPKS (Foundation Field bus- Honeywell)

Shutdown & Safety System : Triconex (Foxboro), Safety Manager (Honeywell): Prosafe – Yokogawa

SCADA System : Infusion SCADA & RTU SCD2200

Vibration Monitoring System : Bentley Nevada - 3500 series. Analyzers : PH, Conductivity, Siemens GC, Teledyne colour& viscosity etc Field Communicators : 475, 375, 275.

Turbine governing system : Woodward-504, peak-150

Antisurge control system : CCC

Over Speed protection device: Protech GII TMR.

Field Instruments

1. Experience in commissioning of final control elements like various types of Valves- control valves, ON-OFF valves, antisurge, ESDV’s, PSVT’s, MOV’s etc. Hydraulic, pneumatic solenoid actuators.

2. Installation, calibration and commissioning of Temperature & pressure transmitters. 3. Commissioning of Flow transmitters-DP, Ultrasonic, vortex etc 4. Level Transmitters-. DP transmitters, ultrasonic, radar, microwave, float etc 5. Vibration sensors & transmitters like radial, axial, temperature, key phasor, veloximitor, accelerometer etc

6. Fire & Gas transmitters like, toxic gas, flame gas, combustible gas etc 7. Calibrators like Multifunction calibrator- GE Druck DPI 620, Scandura Pascal-100/IS, Vibration probe calibrator TK-3

Nature of Jobs Handles:

1. Worked in commissioning, start-up & maintenance activity of all type field Instruments like temperature, pressure, level & flow transmitters, control valves, MOVS, PSVT, ESD, ON-OFF valves etc

2. Preventive maintenance & breakdown maintenance planning, supervision and co- ordination with various departments in day to day activities. 3. Supervisor & Technician job distribution as per job criticality and 24 hours guidance. 4. Weekly instrument job progress review meeting instrument work front analysis& day wise Instrument progress monitoring sheet view to achieve the target. 5. Work To permit card holder.

6. Commissioning, Maintenance & troubleshooting of PLC/DCS/ESD/ F&G system. 7. Good track of ability in communication, interpersonal and organizational skills, planning and executing the tasks on planned time.

8. Provide technical advice during troubleshooting and corrective action of instrument breakdown or failures to find the root cause and best solution in order to restore the functionality back to Normal

9. Calibration of field instruments.

10. Hot Loop, Cold Loop & Functional checking of all field instruments. 11. Inspection at vender works, FAT & SAT for DCS, /ESD/PLC/AS control panel. 12. Hazards associated with carrying out instrumentation and control commissioning & maintenance Activities (such live electrical components, process controller interface, stored High pressure & temperature, toxic gases, combustible gases, misuse of tools& consumables Instrument items).

13. Logic, cause &effect checking & trouble shooting for plant operation related instruments.

14. Shut down execution & planning by co-ordination with another departments & inter department.

15. Trip reports analysis & corresponding action plan for future smooth operation. Personnel Details

Nationality - India.

Marital Status - Married

Date of Birth - March 15, 1983

License - India & Kuwait

Language Known - English, Hindi, Malayalam and Tamil. Address Passport Details

Jim Vincent Thaliath Passport No : Z 3532555

Thaliath House, Place of Issue : Cochin

Puthenpally, Date of Issue : 20/01/2016

Varapuzha P.O, Date of Expiry : 19/01/2026

Ernakulam, Kerala

India, Pin-683517


Mr. Joe Vincent.

Engineer Instrument


KNPC MAA Refinery.

Ph: +965-********.


I hereby declare that the information furnished above is true to the best of my knowledge. Date:26-10-2019

Place: Kuwait

Contact this candidate