Post Job Free
Sign in

Engineering Mechanical

Location:
India
Posted:
October 15, 2019

Contact this candidate

Resume:

Gajanan Anne

Email: *******.****@****-***.**,*******.******@*****.***

Ph: +919*********

Ph.D at Department of Mechanical Engineering, National Institute ofTechnology Karnataka, Surathkal, India (Full time research scholar July 2013- July 2017). Thesis Title: Development and characteristics of ultrafine grained Mg-Zn/Al multilayer composites by accumulative roll bonding process.

M. Tech. in Manufacturing Engineering, M S Ramaiah Institute of Technology, Visveswarayya Technological University, Department of Mechanical Engineering, Bangalore. Secured 9.45 CGPA, July 2011 - May 2013.

M. Tech thesis: Influence of grain refiner addition and heat treatment on the mechanical properties of Aluminium-Silicon alloy.

B. Tech. in Mechanical Engineering, Siddaganga Institute of Technology Tumkur, Visveswarayya Technological University. Secured 8.7 CGPA, July 2008 - May 2011. Part of team adrenaline racing completed the design and fabrication of student formula car under the banner of SUPRA SAE INDIA- 2011.

DIPLOMA in Automobile Engineering, R.N.S Rural Polytechnic Murdeshwar, Karnataka, India. Secured 78.9%, July 2005 - May 2008.

Research Interests

Castings & Processing of metals and alloys, Advanced Manufacturing Engineering, Severe Plastic Deformation, Advanced Materials Characterization, Composites, Wear & Corrosion. Journal Publications

1. Ramesh S, Aditya Kudva S, Gajanan Anne, Bhaskar Manne, Shashibhushan Arya, Optimization of ball-burnishing process parameters on surface roughness, micro hardness of Mg-Zn-Ca alloy and investigation of corrosion behaviour, Materials Research Express, (SCIE, IF:1.45.) Accepted Sep 2019. DOI: 10.1088/2053-1591/ab40f2.

2. Ramesh S, Gajanan Anne, Sandeep Sahu, H Shivananda Nayaka, Ramesh M R, Investigation of Dry Sliding Wear Properties of Multi-directional Forged Mg-Zn Alloys, Journal of Magnesium and Alloys July 2019 (https://doi.org/10.1016/j.jma.2019.05.008). 3. Gajanan Anne, M R Ramesh, H Shivananda Nayaka, Shashi Bhushan Arya, Sandeep Sahu Investigation of mechanical and corrosion behavior of Mg-Zn/Ce/Al hybrid composite developed by accumulative roll bonding, Journal of Alloys Compounds, (2017) 724, 146-154. 4. S. Ramesh, Gajanan Anne, H Shivananda Nayaka, Shashi Bhushan Arya, Sandeep Sahu, Effects of combined multiaxial forging and rolling process on microstructure, mechanical properties and corrosion behavior of a Cu-Ti alloys, Materials Research Express, 6 (2019) 056559. https://doi.org/10.1088/2053-1591/ab0764.

5. Ramesh S, Gajanan Anne, Sandeep Sahu, H Shivananda Nayaka, Ramesh M R, Influence of Multi-Direction Forging on Microstructural, Mechanical and Corrosion Behaviour of Mg-Zn Alloy, Journal of Materials Engineering and Performance. 28(4), 2019, 2053-2062. 6. Gajanan Anne, M R Ramesh, H Shivananda Nayaka, Shashi Bhushan Arya, Sandeep Sahu, Development and properties evaluation of Mg-6%Zn/Al multilayered composites processed by accumulative roll bonding, Journal of Materials Research. (2017) 32(12), 2249-2257. 7. Gajanan Anne, M R Ramesh, H Shivananda Nayaka, Shashi Bhushan Arya, Sandeep Sahu, Microstructure evolution and mechanical and corrosion behavior of accumulative roll bonded Mg- 2%Zn/Al-7075 multilayered composite, Journal of Materials Engineering and Performance.

(2017) 26(4), 1726-1734.

8. Shamanth V, Hemanth k, Gopi. K R, Gajanan Anne, Influence of heat treatment on Cr and Fe rich Precipitates in thermally aged duplex steels, Emerging Materials Research (2018) 7(3), pp. 1–25. 9. S. Ramesh, H. Shivananda Nayaka, Gajanan Anne, and K. R. Gopi, Influence of cold rolling process on microstructure and mechanical properties of Cu-1.5%Ti alloy, AIP Conference Proceedings (2018) 1943, 020055. doi: 10.1063/1.5029631. 10. Chinmayananda Das, Jeevan S, Akarsh, Akash Palan, Gajanan Anne, Development & Investigation of Briquettes Using Organic & Inorganic Binders, International Journal of Scientific & Engineering Research (2018) 9 (4) 254. 11. Gajanan Anne, M R Ramesh, H Shivananda Nayaka, Shashi Bhushan Arya, Microstructure, mechanical and corrosion properties of accumulative roll bonded Mg-2%Zn/anodized Al-7075 composite, Materials Today: Proceedings, (2018) 5 (2), 6868-6877. 12. Gajanan Anne, M. R. Ramesh, H Shivananda Nayaka, Shashi Bhushan Arya, Investigation of microstructure and mechanical properties of Mg-Zn/Al multilayered composite developed by accumulative roll bonding, Perspectives in Science. (2016) 8, 104-106. 13. Anil Kumar. T, Gajanan. Anne, N. D. Prasanna, M. K. Muralidhara, Effect of Electromagnetic Induction and Heat Treatment on the Mechanical and Wear Properties of LM25 Alloy, Procedia Materials Science. (2014) 5, 550-557.

14. Anil Kumar. T, Gajanan. Anne, N. D. Prasanna, Influence of grain refiner addition and heat treatment on the mechanical properties of Ai-Si alloy, Journal of Modern Engineering Research.

(2013) 3 (2), 1220-1228.

Book Chapters

1. Gajanan Anne, Ramesh S, Goutham kumar, Sandeep Sahu, Ramesh M R, H Shivananda Nayaka, Shashibhushan Arya, Development, Characterization, Mechanical and Corrosion Behaviour Investigation of Multi-direction Forged Mg–Zn Alloy, Magnesium Technology 2019, Springer. Chapter DOI.: 10.1007/978-3-030-05789-3_50. Springer Book, ISBN 978-3-030-05788-6. 2. Prabhjot Singh, Ramesh S, Gajanan Anne and H Shivananda Nayaka, Effect of rolling reduction on microstructure and mechanical properties Cu-3%Ti alloy, Advances in Manufacturing Technology, Springer. DOI : 10.1007/978-***-**-****-20. Lecture Notes in Mechanical Engineering, ISBN 978- 981- 13-6374-20.

Conference Publications

1. International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy (SME 2019), Organized by Department of Mechanical Engineering, NMAM Institute of technology, Mangalore, Karnataka, during 23-24 May 2019. 2. National Conference on Emerging Trends in Science and Engineering (NCETSE 2019) Organized by Dept of Mechanical Engineering, Shri Madhwa Vadiraja Institute of Technology and Management, Udupi during April 26-27, 2019. 3. International Conference on Advances in Manufacturing Technology-2018 Organized by Department of Mechanical Engineering, Chennai Institute of Technology, Kundrathur, Chennai, during 22-23th June 2018.

4. National Conference on Emerging Trends in Science and Engineering (NCETSE 2018) Organized by Dept of Mechanical Engineering, Shri Madhwa Vadiraja Institute of Technology and Management, Udupi during April 27-28, 2018. 5. International Conference on Design, Materials & Manufacture (IcDeM 2018) organizing by Dept of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal during January 29-31, 2018.

6. International Conference on Advances in Materials & Processing: Challenges & Opportunities organizing by department of Metallurgical and Material Engineering, Indian Institute of Technology, Roorkee, India, during Nov 30-Dec 02, 2017. 7. International Conference on Emerging Trends in Materials and Manufacturing Engineering, organized by department of Metallurgical and Materials Engineering, NIT Thiruchinapalli, Tamil Nadu, during Mar 10-12, 2017. (Received best paper award) 8. 6th International Engineering Symposium, organized by Graduate School of Science & Technology Kumamoto University, Kumamoto, Japan during Mar 1-3, 2017. 9. International Conference on Recent Trends in Engineering and Material Science, organized by Jaipur National University, Jaipur during 17-19 Mar 2016. 10. International Conference on Advances in Manufacturing and Materilas Engineering organized by Dept of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal during 27-29 Mar 2014.

Awards and Recognitions

1 MHRD scholarship for pursuing Ph.D (National Institute of Technology Karnataka, Surathkal 2013-2017) Government of India, Ministry of Human Resource Development. 2 Best paper award at International Conference on Emerging Trends in Materials and Manufacturing Engineering, organized by department of metallurgical and materials engineering, NIT Thiruchinapalli, Tamil Nadu, during Mar 10-12, 2017. 3 JASSO Scholarship at Graduate School of Science and Technology, Kumamoto University, Japan for internship program during Feb-28-2017 to Mar 7-2017. Work Experience

Institution: Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM) Designation: Associate Professor

Duration: Jan 2018-Till Date

Institution: National Institute of Technology Karnataka, Surathkal (NITK) Designation: Temporary Faculty (Lecturer)

Duration: July 2017-Jan 2018

Institution: National Institute of Technology Karnataka, Surathkal (NITK) Designation: Research Scholar (Full Time)

Duration: July 2013-July 2017

Institute outreach activities

Ph.D Supervisor

Appl (RSRI):

6192 (VTU07186194)

1 Ongoing

Name of the researcher: Aditya Kudva S, (Appl. No 6283) Proposed Research Work: Development of biodegradable implant materials through severe plastic deformation and thin coating techniques Coordinator National Conference on Emerging Trends in Science and Engineering

(NCETSE-2019) held at Shri Madhwa Vadiraja Institute of Technology and Management, Bantakal, Udupi on 26 & 27 April 2019.

National Conference on Emerging Trends in Science and Engineering

(NCETSE-2018) held at Shri Madhwa Vadiraja Institute of Technology and Management, Bantakal, Udupi on 27 & 28 April 2018.

Two days’ workshop on “Advanced Automobile Engineering” in association with AIESEC-IIT Delhi to be held at Shri Madhwa Vadiraja Institute of Technology and Management, Bantakal, Udupi on 27 & 28 Oct 2018.

Faculty Advisor

SUPRA SAE INDIA, Participated student formula racing held at buddh international circuit, Greater Noida during July 15-20, 2019.

(Membership No: 718*******)

Convener MHRD Institute Innovation Council at SMVITM Journal Reviewer Materials Research Express

Journal of Materials Engineering and Performance

Measurement Science and Technology

JEM Part B: Journal of Engineering Manufacture

Journal of Materials Research

Journal of Automotive and Mechanical Engineering

Advanced Composites and Hybrid Materials

Journal of Magnesium and alloys

Composite Part B

NAAC Accreditation Criteria Coordinator

NPTEL Course Manufacturing of composites (Awarded with Elite Certificate) Co-chair person NCETSE-2018

Workshops/ Symposium Attended

1. Participated as a faculty adviser for SAE INDIA SUPRA – 2019, student formula racing held at buddh international circuit, Greater Noida during July 15-20, 2019. 2. Completed AICTE sponsored one week faculty development program (FDP) on Manufacturing of composite during Aug-Sep 2018.

3. Participated in three days national workshop on “Laser Processing of Materials” Sponsored by TEQIP-II held at Dept of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal during 8-10 Mar 2017.

4. Participated national workshop on “Simulation of Manufacturing Processes” Sponsored by TEQIP-II held at Dept of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal 25 Feb 2017.

5. Participated course on “Hybrid Composites: Manufacturing, Mechanical and Materials” held at Dept of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal during 18-22 Dec 2016 Sponsored by GIAN, MHRD, Government of India. 6. Participated in two days national workshop on “Tribology Frontiers in Design and Manufacturing” held at Dept of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal during 24-25 Oct 2016.

7. Participated in three days national workshop on “Advanced Materials and Manufacturing” organized by Dept of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal during 28-30 Sept 2016.

8. Participated in two days national workshop on “Computational dynamics” held at Dept of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal during 26-27 Sept 2016.

9. Participated in the NRC-M workshop on “Interface Related Mechanical Behaviour of Materials” held at the Dept of Materials Engineering, Indian Institute of Science, Bangalore during 27-28 Nov 2015.

10. Participated in the NRC-M symposium on “Severe Plastic Deformation and Bulk Nano- structured Materials” held at the Dept of Materials Engineering, Indian Institute of Science, Bangalore during 12-14 May 2014.

11. Participated in two days course on “Thermal Spray Technology” held at International Advanced Centre for Powder Metallurgy and Materials (ARCI) Hyderabad, during 22-23 Nov 2014. 12. Participated in two day national workshop on “Engineering Failure Analysis” held at Dept of Metallurgical and Materials Engineering, NITK, Surathkal and in collaboration with Society for Failure Analysis, Hyderabad, during 1-2 Aug 2014.

13. Participated in national workshop on “Emerging Trends in Nanotechnology/Nano materials” organized by Dept of Mechanical Engineering, M. S. Ramaiah Institute of Technology, Bangalore on 29th Feb 2012.

14. Participated workshop of SUPRA SAE INDIA 2011 held at Automotive Research Association of India (ARAI), Puna on 15 Feb 2011.

15. Underwent in plant training in Jindal Steel Works (JSW) ltd, dated 1st July - 15th August 2009. 16. Part of team adrenaline racing completed the student Formula Car designing and fabrication under the banner of “SUPRA SAE INDIA” held in Chennai, India during 29 June -3 July 2011. Software known

• Acquainted with AutoCad, & Solid Edge, CATIA V5 and HYPRERMESH

• Origin Pro

• X’Pert high score (XRD analysis)

• EC-Lab V10.36 (Electrochemical corrosion analysis)

• HKL channel 5 software ( Grain orientation analysis)

• Minitab (Statistical & Data Analysis Software)

Personal Profile

Father name: Dattatreya.S.Hegde

Mother name: Malini D Hegde

D. O. B: 08-Jan-1987

Marital status: Married

Permanent address: S/O Dattatreya.S.Hegde,

#144A, Anneramankeri, Post: Salkod,

Honnavar. Uttar-kannada- 581334

Professional References

1. Dr. Ramesh M R, Associate Professor, Department of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal, India.

Email: *********@*****.***. Ph:948*******

2. Dr. H Shivananda Nayaka, Associate Professor, Department of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal, India. Email: ********@****.**.**. Ph:944-***-****

3. Dr. Shashi Bhushan Arya, Assistant Professor, Department of Metallurgical and Materials Engineering, National Institute of Technology Karnataka, Surathkal, -575025, India. Email: ******@****.***.**. Ph:876-***-****



Contact this candidate