SAJID UR REHMAN
A career that is challenging and interesting. A job that give me opportunities to work at the leading edge of technology to learn, to innovate, to lead other and feel the satisfaction of success and potential to meet the challenge of growing demand.
Company : POWERMECH Engineering, Qatar
Position : Electrical Maintenance Engineer.
Duration : Dec 2018 to Present.
Role and Responsibility
Electrical Maintenance Engineer with very strong technical as well as facility management experience of working in the Middle East in the areas of Electrical operation and maintenance as well contract and vendor management, writing technical SOP's and SLAs, define KPIs regarding Hard services. Currently I have been working as Maintenance Engineer with POWERMECH Engineering Doha responsible for testing and commissioning/handover in the pre-opening phase and, now for operation and maintenance of Electrical Services– PPM, Predictive, Corrective & Reactive Maintenance, including writing SLAs with all third-party Specialized Service Providers and defining KPIs for their performance. I have very strong communication, time-management, interpersonal and conflict resolution skills. I have strong skills of managing stress and working under stressful condition
Schedule and undertake periodic maintenance on all electrical equipment, components, and installations.
Provide prompt response to inquiries whenever there is a breakdown, and resolve the issue as quickly as possible.
Ensure that equipment’s are in good working order to prevent disruption of activities.
Installation of fresh electrical components and fittings.
Recommend replacement for old or faulty electrical components or fittings to the management.
Assist in forecasting requirements, creating a budget and scheduling expenses for the electrical department.
Keep record of all stock and supplies, including company’s equipment.
Perform energy audit and recommend alternative sources of energy
Help the facility management analyses the electrical system to reduce energy costs.
Ensure that all electrical lighting, office equipment’s etc. are switched off after close of work daily.
Fix and maintain lighting fixtures and fittings.
Troubleshoot machine breakdowns and provide preventive maintenance services.
Learn new skills and attend training programs in other to increase knowledge of trends and best practices in the MOQ Systems.
Provide safe working environment for Electrical technicians, and ensure electricity induced accidents and mishaps are prevented.
Take steps to prevent fire outbreaks by making appropriate recommendations to management.
Provide 24 hours a day maintenance services or assign technical staff to do so.
Supervise electrical works when new Electrical Equipment installation are undertaken.
Company : Elegancia Hospitality & Facility Management Service, Qatar.
Position : Facility Engineer.
Duration : Nov 2015 to Dec 2018
Role and Responsibility:
Lead the team of Supervisor’s, Technician’s and Sub-Contractors in day to day Facility operations.
Responsible for planning, execution and supervision of all activities including walk-through inspections and corrective maintenance works (Soft & Hard Services).
Supervise team members in accordance with company policies and procedures. Schedule and conduct team meetings.
Responsible for achieving availability, maintainability, reliability and safety standards of all clients’ equipment’s (Soft & Hard Services).
Conduct regular walk-through inspections of Building’s status and its systems etc.
Direct Coordination with client’s Facility Management team/ representatives.
Update & maintain client asset register & its maintenance history.
Generate Service Orders/Work Orders by entering information into Computerized Maintenance Management System (CMMS).
Direct request or problem to the most appropriate support area (e.g. MEP, HVAC, Building & Soft Services).
Monitors work in progress performing by the Sub-contractors & Technicians, including field investigations, Preventive & Corrective Maintenance, Equipment’s Breakdown Analysis & ensure compliance with approved plans, specifications, standards & ensures that the KPI’s are achieved.
Prepares Technical Reports and recommendation for work in progress and repair works. Participates in final walk-through inspections and the process of project check-out and acceptance, and the turning over of equipment/projects to system operations and distribution personnel.
Provide technical assistance and give feedback on client/tenants to ensure that inquiries, requests or complaint have been satisfactorily handled.
Company : Urbacon Trading & contracting (UCC/KCT), Qatar.
Position : Electrical Engineer.
Duration : May 2014 - Nov 2015.
Role and Responsibility:
Checking of All Electrical Works at Site
Preparing of Inspection Request Prior to Invite Consultant at Site
Preparing of Checklist for All Electrical System
Checking of Approved Material Submittals if Complying the Specification
Prepared daily, weekly and monthly construction schedules of high rise buildings and with associated facilities. Reviewed engineering plans and coordinates modifications to the plans with Engineering.
Installation and termination of main supply cables from LV panels to MDBs, SMDBs, DBs, Isolator and Power outlets.
Installation of different kinds of Lighting fixture, Lighting Poles, Emergency Lights, motion detectors and lighting control panel.
Installation of Low current systems, Telephone and Data System, Public address system, Intercom system, access control system, Car Barrier System, CCTV System and Fire alarm system.
Installation of MDB’S, SMDB’S, DB’S, LCP’S, and CBS panels as per setting out plans and as per coordination with mechanical services.
Installation of Battery chargers as per setting out plans and as per site requirement.
Installation of cable Tray as per site requirement with coordinating other services.
Bus duct installation for LV panels and Generators.
Dressing, Glanding and termination for LV cables and MICC.
Installation of Earthling bars and Earthling cable laying and its termination for substations.
MICC lighting, MICC Emergency, MICC power (Ring) and MICC fire alarm for substations.
MICC wiring for DFCU's and FCU's equipment’s.
Installation of Isolators for Mechanical Equipment’s.
Installation of Lighting fittings and power sockets.
Cable laying, Dressing, Glanding and Terminations from Battery charger to LV Panels.
IR and Continuity Tests for cable and Bus bar.
Completion of the work as per latest IFC drawings.
Familiar with standard concepts, practices, and procedures within a field.
Maintained project reports and other technical documents.
Pre-commissioning and Commissioning of LV panels & Capacitor Banks. (Contact Resistance Test, IR Test, HV Test, Verification of Earth continuity Test & Functional Tests.)
Pre-commissioning and Commissioning of MDB’S, SMDB’S, DB’S as per Approved Method statement
Company : Redco International, Pakistan.
Position : Site Electrical Engineer
Duration : July 2012 – May 2014.
Role and Responsibility:
Work as a Site Engineer.
Site Supervision at MEP Installations.
Planning and Estimation.
LV Panel, DB & DB installation.
Electricity Distribution to the loads from Panels through Main Distribution Board, Sub main Distribution and Distribution Board.
Electrical Conduits Installation, Electrical Trunking, Tray and Proper Wiring according to the Electrical Loads requirement.
Load Calculation and Work as per approved Drawing.
Fixing of Circuit breakers according to the Load requirements.
Using of MCB and ELCB Breakers According to the load requirement.
Proper Lighting Fixing.
Preparation of low voltage drawings like Single Line Diagram, Load estimations, Cable sizing, Distribution board schedules.
Testing and Commissioning.
Quality Assurance and Quality Control.
Proper scheduling and make assure Materials and workers at site.
Daily, weekly and monthly report submittals.
All kind of Electrical Maintenance
Conducting High Electrical Frequency Measurement (using Taser M18 Device).
Variable power supply.
DC motor speed control.
Traffic control system.
March 2009 – July 2013: COMSATS Institute of Information Technology, Islamabad, Pakistan.
BS Electrical (Power) Engineering (4 years’ degree)
Sep 2006 – Nov 2008 : Government Post Graduate College, Kohat, Pakistan.
Apr 1995 – May 2006 : Beacon Public High School, Kohat, Pakistan.
Yardi Soft wear
Conducting High Electrical Frequency Measurement
Father Name : Haji Sher Zaman
Nationality : Pakistani
Date of Birth : 15 Aug 1987
Material Status : Married
Passport No : DD5570662
Cell No. : +974-********
Present Address : Old Al-Ghanim Doha-Qatar
Language Know : English, Pashto, Urdu & Hindi.
Available and Will Be Provide on Mutual Interest.