JOEL R. GALANG

Address: *th floor, Al Jassim Commercial Tower, C-Ring Rd.

Suhaim Bin Hamad St. P.O. Box 37069, Doha, Qatar

Email Address: ada4jd@r.postjobfree.com

Mobile no.: +974-********

OBJECTIVES

-Dedicated person with well-developed communication.

-Goal oriented; able to make effective use of all available resources.

-Works well independently or as a member of team.

-And to enjoy working and growing camaraderie of new acquaintances, with the view of promoting and upholding the company’s goal of vision of success.

WORK EXPERIENCE

Company: Keppel Seghers Qatar

Position: Overhead Crane Operator

Date: July 11, 2018 up to Present

ID #: 3002117

Department: WTE(Waste to Energy)

DUTIES & RESPONSIBILITIES

Operating Overhead Crane with Safe Work Load of 16 Tons.

Checking Crane before operation. Checking also grab close/open motion.

Working at Power Plant in Waste to Energy Department.

Mixing domestic solid waste before Top-up.

Topping up waste in Boiler drum/hopper to incinerate.

Follows work instruction from Shift Charge or Supervisor.

Filling up daily checklist.

Monitoring and writes down refuse/waste actual load before Top-up.

Loading ash in ash bunker area. Clearing and loading on ash truck.

Perform other duties assigned.

WORK EXPERIENCE

Company: Safi Independent Power Plant (SIPP), Morocco

Daewoo Engineering & Construction

Position: Overhead Crane Operator

Date: December 2, 2016 to November 16, 2017

ID #: OPAP112664

Department: Mechanical

DUTIES & RESPONSIBILITIES

Responsible in operating Overhead Crane with a Safe Work load (SWL) of 120 Tons/45 Tons Auxilliary.

Works in Steam Turbine Generator area.

Ensures Safety First before operation. Harness is mandatory in working at heights.

Follows work instructions from Supervisor/s. Checks Lifting plan if available.

Visually checks Crane, inside and outside cabin. Ensures if there’s no unwanted objects on cranes pathways or railings.

Able to communicate from Rigger or Signalman. Two way radio is a must. Ensures radio is functional.

Responsible in lifting turbine parts like diaphram, stud bolt, casings HP and IP, Rotors, pipes, valves, bearings etc.

Supports lifting operation both Mechanical and Piping.

Ensures teamwork at all times.

Performs other duties assigned.

WORK EXPERIENCE

Company: Sungdo Arabia Contracting Ltd., K.S.A.

Position: Overhead Crane Operator

Date: January 14, 2016 to August 17, 2016

ID #: SD-YPDP3P-F-0063

DUTIES & RESPONSIBILITIES

Responsible in operating Overhead Crane with a Safe working load of 250 Tons main hoist and an Auxilliary of 40 Tons.

Manages to work in a Steam Turbine Generator (STG).

Ensures to use harness, 100% tie-off always.

Operates generator for power source of Overhead crane before the operation.Ensures the 400 volts power input of a generator. If voltage is below 400 V immediately notifies the maintenance.

Visually checks crane’s pathways/railways.

Follows work instructions from Supervisor/s.

Follows Safety procedures and reads lifting plan.

Conducts daily checklist. Also report for monthly maintenance.

Ensures emergency stop button is functional.

Checks also radio is functional.

Supports in mechanical and rigging team. Also supports in other subcontractors.

Manages load hook up and determined safety of load. Checks also loadmeter is functional.

WORK EXPERIENCE

Company: Samjin Industrial Co. Ltd./ Braka Nuclear Power Plant,

Emirates Nuclear Power Corporation (ENEC) Abu Dhabi, U.A.E.

Position: Polar Crane Operator

Date: April 24, 2014 to April 24, 2015

ID #: SJPW5144

DUTIES & RESPONSIBILITIES

Conducts preliminary inspection. Checking all controls & buttons. Also checking both trolley and bridge railways.

Responsible in operating 475 Tons S.W.L. crane with an Auxilliary of 90 tons. Working in a 100 feet high Polar crane.

Manages to use harness at all times. Also checks larnyard before using. 100 % tie off. Checking always lifeline in working area fitted.

Follows instructions and reads work order from Supervisor/Manager. Checking lifting schedule and checks lifting plan before the operation. And able to participate in toolbox meeting.

Visually checks crane for any possible abnormalities and unusual sound during operation.

Notifies Supervisor/Manager If troubles exist, immediately seeks maintenance.

Checking wire rope cable for any damage. Monitors also greasing if required.

Checking voltmeter before and during operation.

Responsible in moving and lifting heavy load like gas container tanks, vessels, H-beams, machines, pipes/spools, manbasket, steel graitings, stainless plates, steel planks, steel bars etc. Monitors the weight of the load. Observes also loadmeter.

Identifies also sling belt, wire rope and shackles to be use. The length and thickness determines the limit capacity of any lifting materials.

Ensuring safety always in work site. Able to use fire extinguisher.

Communicate and coordinate with Rigger or signalman. Signals should be audible and clear at all times. Able to use two way radio and spare full charge battery in standby.

Maintains cleanliness and good housekeeping.

Supports in mechanical and structural lifting.

Able to train new crew. Maintain teamwork at all times.

Performs such other duties as assigned.

WORK EXPERIENCE

Company: Saudi Iron And Steel Company/ HADEED

Position: Overhead Crane Operator

Date: May 27, 2011 to July 24, 2013

ID #: HD879598

DUTIES & RESPONSIBILITIES

Ensures preliminary inspection.

-Checks Crane’s pathways/railways.

-Checking master controller. Checking warning audio horn.

-Checking test function of emergency stop button.

-Visual inspects of rope on drum grooves, includes main hoist and auxiliary hoist.

-Test both main & auxiliary hoist limit slow down also test function of both hoist break system.

Monitors the weight of the object being lifted. Monitors load meter.

Ensures the rated load capacity of a cranes bridge hoist, cable or any sling or fitting will not exceed.

Responsible in moving and lifting a heavy load. Works in a fast pace cold rolling mill section with a Safe Work Load (S.W.L) of 35 Tons. Also an average weight of 10-31 Tons of coil to be moved and transfer.

Responsible in handling of scrap boxes. Changing of scrap box in Entry/Exit Pulpit.

Required to manipulate equipment on unlevel working surface.

Loads and unloads materials, coils, machines etc.

Assisting in lifting operation and securing of materials and work pieces during the weekly and monthly maintenance of crane.

Responsible for the accuracy of the coil on their assigned/designated area.

Performs safety check and fills out safety checklist every operation.

Reads work order or follows instructions to a certain materials or coil to be moved.

Manipulates crane control to regulate speed and direction of crane and hoist movement according to written, verbal of instruction.

Communicate and Coordinate with Rigger/Signalman. Signals should be audible at all times. Able to use two-way radio or intercom. Mobile phone is always in standby mode.

Inspects crane for defective parts. Notifies the Supervisor/Foreman of the defects or malfunctions as much as possible.

Informs detailed reports to reliever operator before and after the operation.

Assigns and manages receiving coils for available storage.

Maintains cleanliness, good housekeeping and safe working conditions.

Able to train new crew. Maintain teamwork.

WORK EXPERIENCE

Company: Hanjin Heavy Industries Corp. (HHIC)-Subic Bay, Philippines

Position: Overhead Crane Operator

Date: September 16,2008 to April 23,2011

Employee #: 0893119

DUTIES & RESPONSIBILITEIS

Ensures preliminary inspection before the operation.

Manages to use fall protection at all times.

Perform productive operation for Gantry Crane/Overhead Crane.

Observes load hook up and determines safety of load.

Responsible in operating a crane with an S.W.L. of 100 Tons.

Assist in lifting position of blocks or sections of a ship.

Loads and unloads materials, tools, pipes, long bars, I-beams and machines onto from pallets/racks.

Manipulates crane control to regulate speed and direction of crane and hoist movement according to written, verbal of instructions.

Performs daily safety check and fills out safety check list. Inspects crane for defective parts. Documents and notifies the Supervisor or Foreman about the defects or malfunctions as much as possible.

Able to use fire extinguisher. Checking the validity or expiry of fire extinguisher.

Assist in routine maintenance or repairs.

Ensures hand signals from Rigger or signalman at all times.

Maintains good housekeeping and safe working conditions.

Prepares always in training new crew. Maintains teamwork always.

Performed such other duties as assigned.

PERSONAL DATA

Date of Birth: Feb. 17, 1974

Place of Birth: Olongapo City, Philippines

Sex: Male

Nationality: Filipino

Civil Status: Married

Height: 5’9”

Weight: 145 Lbs.

Religion: Christian

Languages: Filipino, English

Father’s Name: Jesus M. Galang

Mother’s Name: Estrellita R. Galang

Children’s Name:

Karl Stephen R. Galang -22 yrs. Old

Jonah Aaron R. Galang -19 yrs. Old

Passport No.: P5634597A

Place of Issue: DFA Pampanga, Philippines

Date of Expire: January 2028

EDUCATION

Technological Institute of the Philippines

B.S. Electrical Engineering

Manila, Philippines

Date: June 1993-March 1996

Olongapo City National High School

Secondary Education

Olongapo City, Philippines

Date: June 1987-March 1991

Tapinac Elementary School

Primary Education

Olongapo City, Philippines

Date: June 1981-March 1987

SEMINARS/TRAINING

Safe Overhead Crane Operation

Keppel Seghers, Qatar

BUREAU VERITAS

February 19-21, 2019

Validity February 21, 2022

Certificate #: 274********

Overhead Crane Operator

Sungdo Arabia Contracting, Ltd., K.S.A.

January 17, 2016

VELOSI Certificate # :VKSA/SACO/ID/16-24043

Gas Testing

Samjin Industrial Co. Ltd., Abu Dhabi

August 5, 2014

Certificate # :SZS/14/SJICAGT06

Safe Overhead Crane Operations

Samjin Industrial Co. Ltd., Abu Dhabi

August 5, 2014

Certificate # :SZS/14/SJICOHC04

CHARACTER REFERENCE

NAME : Francisco Salvador

POSITION : Crane Operator

ADDRESS : Purok 3 Matain Subic Zambalez, Philippines

CONTACT NO.: +639********* / +639*********

NAME : Mildred Torres

POSITION : Human Resource

ADDRESS : Murror St. Abu Dhabi, U.A.E.

CONTACT NO.: +971*********

NAME : Jenny R. Galang

POSITION : Purchase Executive

ADDRESS : Sky Tower Bldg. Room 133,

Sheikh Zayed Road,Dubai U.A.E.

CONTACT NO.: +971-*********

Contact this candidate