Project Engineer Electrical
Resume:
Mohammad Azad Ali (PMP, QCDD, UPDA)
Electrical Project Engineer
Oil & Gas and Construction Electrical Project Engineer with nearly 11+ years of experience a s Electrical Project Engineer in various activities for Oil & Gas and Construction Projects with Local and international clients. Good knowledge and understanding of the development, installation, Design, construction and operation of Onshore & Offshore and Commercial & Residential. Well-versed in modelling tools and techniques used in Oil & Gas design and Construction. Excellent analytical skills in assessing problems and developing models for further analysis and troubleshooting. Willing to relocate: Anywhere
CONTACT EMPLOYMENT HISTORY (Total 11+ Years of Experience) JAMA E&M ENGINEERING CO. (QATAR) (FEB.2022 – PRESENT): - Project: Factory, Commercial and Residential Projects. Location: Qatar.
Client: Qatar Foundation and Mr. Heidar Abdul Kareem Ali etc. Designation: Electrical Project Engineer
Managing and liaise with the CM, MEP coordinators, Site engineers and foremen.
Ensuring the project discipline works are executed in accordance with the relevant discipline drawings, specifications, method statement, execution program in coordination with all other disciplines (MEP and Civil).
Ensuring the Electrical works are executed efficiently within the target schedule in the best quality without materials wastage.
Ensuring the Electrical works are executed in compliance with local authorities that has jurisdiction over the discipline scope of work i.e. KM, QCDD, Ooredoo, Health and Safety and all standards applicable to the project such as QCS2014 and the project specifications.
Ensuring adherence to the relevant Company's policies and procedures.
Ensuring the satisfaction of the client, consultant and main contractor and MEP project manager/CM always.
Guiding the site engineers through the work activities management process throughout the duration of the project.
Assigning specific targets to the various work activities.
Planning and allocating responsibilities to team members.
Reviewing and approve Electrical shop drawings.
Reviewing and approve Electrical design calculations.
Reviewing and sign-off Electrical material technical submittal before issuance to consultant.
Reviewing and sign-off material requisitions.
Preparing schedule of method statements.
Review and approve method statements in compliance with project specifications and budget.
Liaising with technical department for the relevant authority approvals.
Oversee all Electrical, Fire Alarm and works on the project site.
Verify design Calculation in compliance with the project specification.
Familiar with local and international standards (NFPA, KH, QCS and QCDD).
Ensure that the installation, inspection, and testing of all MEP equipment, fittings, and work implemented meets the specifications and consultant requirements.
Coordinate with the project team for the implementation of construction schedules.
+974******** (Current)
+974******** (Qatar)
+919********* (India)
**********@*****.***
linkedin.com/in/md-azad-
ali-662a80275
Doha-Qatar
EDUCATION
B. Tech (Electrical
Engineering)
MEP Design and Drafting
UPDA/MMUP-Qatar
Start Date – 09 July 2022
Expiration Date – 09 July
2025
QCD- (Qatar Civil
Defence)
Start Date – 09 July 2022
Expiration Date – 09 July
2025
PMP (Number – 326616)
Start Date – 09 July 2022
Expiration Date – 09 July
2025
SOFTWARE SKILL
ETAP
AUTO CAD (2D & 3D)
Dilux
Focus
SAP
Licenses & certifications
• PMP (Project
management
Professional)
• Qatar Civil Defense
Licensed (Fire Alarm).
• UPDA (Urban Planning
and Development
Authority in Qatar, Grade
C.)
• CFM (Certified Facilities
Manager)
• Valid Qatar Driving
license.
Awards and Achievements
• Implementation of Safe
work practices at site.
• Appreciation for
successful handover of
the project.
Volunteering
• FIFA-2022 (Qatar)
• Arab Cup (Qatar)
Soft Skills
Strong Communication,
Analytical Skills, Focused, Team
Building, Supervision Skills,
Creativity, work under pressure,
Problem-solving, decision
making skills, Creative thinking
skills, Interpersonal and team-
working skills, Excellent verbal
and write, Commercial
awareness, Hardworking, Fast
learning, Supportive, Good
Manners and Attitude,
Planning, Reporting, and
organization skills.
MJK GROUPS (QATAR) (AUG.2017– FEB.2022): -
Project: Factory, Commercial and Residential Projects. Location: Qatar.
Client: Suhail Holding and Mr. Abdullah Abdul Ghani etc. Designation: - Senior Electrical Engineer.
• Coordinated with, clients, consultants, stakeholders and subcontractors.
• Supervised up to 20+ projects for building Villas, Complexes, Residential and commercial buildings, Warehouses, factories, Power stations, and Hotels.
• Quantity surveying and Price Estimation of MEP related projects.
• Attend pre-bid site visits for maintenance, refurbishment and fit out projects.
• Prepared of Material submittals, Method statement & Reports.
• Prepared and monitoring time schedules of ongoing projects.
• Coordination with the project team for the implementation of the construction schedule.
• Installed and Maintained of Electrical systems.
• Oversee all Mechanical, Electrical, and Plumbing (MEP) works on the project site.
• Ensure MEP work is carried out as per approved shop drawings and within the timeframe and progress of the approved construction program.
• Ensure that the installation, inspection, and testing of all MEP equipment, fittings, and work implemented meets the specifications and consultant requirements.
• Verify the accuracy of shop drawings and their compliance with the specifications, consultant’s design, and existing local authority standards.
• Take complete responsibility for deciding on day-to-day work that needs to be carried out by subordinates, including scheduling activities, assigning tasks to groups or individuals, ensuring the accuracy of work conducted, supplying resources, and addressing operational issues and problems.
• Coordinate with other project personnel to ensure that deadlines, procedures, and other project requirements are met.
• Liaise with local authorities for the approval of MEP services drawings and service connections.
• Prepare shop drawing and material submittals for consultant’s approval.
• Controlled the checking and reviewing to meet project, company, and client specifications for safe design.
• Having good communication with clients, consultant.
• Monitoring the site works according to the Design requirements.
• Regular site visits, having good co-ordination with all.
• Quantity take-off for all electrical systems.
• Prepared and reviewed contracts and progress invoices.
• MV/LV, Feeder Pillar and Street lights Installation & Supervision.
• Ensure MEP work is carried out as per approved shop drawings and within the timeframe and progress of the approved construction program.
• Prepare Material submittals, Method statement & Reports.
• Prepare Shop Drawings for Electrical and Fire Alarm Services.
• Preparation and timely submission of technical and commercial proposals for tenders.
• Reviewing Design drawings for Electrical and Fire alarm services.
• Prepare and monitor time schedules of ongoing projects.
• Prepare daily, weekly and monthly work progress reports.
• Reporting to MEP Manager and Project Manager.
TECHNICAL SKILLS-
Electrical Design
Engineering Analysis
Technical
Documentation
Prototype
Development
Problem Solving
Testing and Validation
Quality Assurance
Project Management
Project Control
Cost Management
Planning
Tendering
Estimating
Strong Knowledge of
the Construction field.
Electrical codes and
standards
NFPA
Kharamma
QCDD
Voltage drop
calculation.
Collaboration
Accountability
Resilience
Quality
Leadership
Electrical power
design.
ELV cabling.
Electrical wiring
Electrical load
diagrams.
schedules and
calculation.
REDCO INTERNATIONAL W.L.L (SEP.2016 – AUGUST 2017): - Project: -Green Line Metro
Location: Qatar
Client: Qatar Rail
Designation: - Electrical Engineer
• Supervise site works for Electrical System, Fire alarm, and clean agent fire suppression system.
• Follow KAHRAMAA and Authorities approvals.
• Prepare necessary Shop Drawing, “As built” and Material submittals
• Prepare Bill of Quantity (BOQ), Including Materials Take offs.
• Coordinate with all the subcontractors.
• Planning of project activities.
• Problem solving and troubleshooting of electrical (MEP) issues.
• Prepare the Inspections request (IR) and Materials Inspection requests
(MIR).
• Monitor and supervise the multiple Construction & Maintenance activities- Electrical, FA,
• Emergency system, Fire Fighting Drainage & Plumbing.
• Recording of daily activities and resources.
• Prepare the monthly payments, subcontractors payments, and variations.
• Prepare the (IR) works Inspections request and (MIR) Materials Inspection requests.
• Reporting to MEP Manager and Project Manager.
• Providing technical Support and guidance to Site Engineer and supervisors.
• Schedule Management, Cost Control, Risk Management & Project Reporting.
• Technical leadership within the discipline of Electrical engineering.
• Prepare and review of Mechanical related contracts and progress invoices.
• Having good communication with clients, consultant.
• Follow up site team for day-to-day progress.
• Planning of project activities.
• Regular site visits, having good co-ordination with all.
• Quantity take-off for all electrical and Fire Alarm Services.
• Monitoring the site works according to the Design requirements.
• Prepare Bill of Quantity (BOQ), Including Materials Take offs.
• Prepare deficiency list to ensure 100% specification Completion in project close out report.
• Follow KAHRAMAA & QCDD and Authorities approvals.
• Prepare daily, weekly and monthly work progress reports.
• Reporting to MEP Manager and Project Manager.
LARSEN AND TOUBRO. (INDIA) (May 2014 – August 2016) Project: Barauni Refinery
Location: India
Project: Refinery
Client: IOCL
Designation: - Electrical Engineer
• Reviewing of existing electrical systems, Preparation of man-hours estimation, Site visits and Preparation of site visit reports, Preparation of drawings/ documents for demolition scope, Preparation of drawings / documents for construction scope, Preparation of Material Requisition, MTO, Datasheets, Vendor document review, TBE, etc.
• Preparation of Electrical Load List.
• Preparation of Single Line diagram, Protection Single Line Diagram.
• Sizing Calculations for various electrical equipment.
• Preparation of Material Requisition, Data Sheets, Specifications.
• Preparation of Equipment layout for substations, Earthing & Lightning Layouts, Power cable layouts in Tray / Trenches, Lighting layouts, etc.
• Preparation of Cable Schedule, Drum Schedule, MTO.
• Vendor Document / Drawing Review.
• Site Visits for Detail engineering projects for projects scope discussion and clarifications with Client and collection of data from site.
• Review of Existing Electrical Power System design.
• Study and preparation of Modification Scope for HV/LV Switchboards, Distribution Boards, Substation Control & Monitoring System, UPS, etc.
• Preparation and Review of Electrical equipment sizing calculations.
• Preparation and review of HV/LV Single Line Diagram, Metering & Protection Design, Equipment Layouts, Cable Routing Layouts, Earthing / Lightning Layouts, Specifications, Datasheets, MTO, MRs & TBEs, VDR, etc.
• Client & Vendor co-ordinations
• Interfacing with EPC Contractor, Client, Project and Planning team.
• WORK EXPERIENCE
OFFSHORE EXPERIENCE:
Having good professional experience, in construction, installation activities and preparation of construction procedure, method statement and other related documents.
• Construction Documentation
• Survey and route preparation
• Environment Consideration
• Vessel Audit
• Pre-commissioning and Commissioning
• Preparation of 415V LV Switchgear/MCC.
• System Study Report (Load Flow Analysis, Short Circuit/Fault Level Calculation) Using ETAP & CYME Software’s.
• Sizing Calculation for HV/LV Cable Sizing Calculation, Transformer and DG Sizing Calculation.
• Vendor Drawing Review for Major Electrical Equipment.
• Earthing Calculation using ETAP Software.
• Responsible for power system studies and development of design drawings, studies and reports.
• Electrical Power System
studies viz. Load Flow
Analysis, Short Circuit
Analysis, Relay Settings &
Co-ordination, Harmonic
Analysis, Transient
Stability Study, Motor
Starting Analysis, etc. on
ETAP software.
• Preparation of Key Single
Line Diagrams (HV & LV
system), Metering &
Protection Single Line
Diagram (HV & LV System).
• Preparation of Load List &
Electrical Equipment Sizing
Calculations.
• Preparation of Design
Calculations such as H.V &
L.V Cable sizing, Earthing &
Lightning protection,
Emergency Generator
Sizing, A.C & D.C UPS sizing
etc.
• Hazardous Area
Classification and selection
of equipment as per Shell
DEP / IEC / IEEE / IS std.
• Preparation of Scope of
work for Cathodic
Protection System & Heat
Tracing System.
• Preparation and Checking
for SUBSATION / POWER
SKIDS GA and Layout.
• Preparation and Checking
Cable Tray Layout,
Earthing Layouts, Lighting
Layouts & Lightning
protection Layouts.
• Preparation of H.V and L.V
Cable Schedule, Drum
Schedule, Interconnection
Schedule & MTO.
• Review of Vendors
Drawings (Power &
Distribution Transformers,
DG set, H.V Switchboards,
MCC & Distribution
boards, AC / DC UPS,
Power & Control cables,
Electrical Bulks, etc.).
• Preparation of Material
Requisition & Technical
Bid evaluation of Electrical
equipment.
• Assets Registration in SAP
software and Maintenance
plan strategy for
equipment’s inside entire
plant.
• Co-ordinating with other
dept. drawings, P&ID, Civil,
Mech. GA & Piping Layouts
for electrical inputs.
• Familiar with international
design code like IEC, IS and
Shell DEP Std.
• Preparing CTR / Man hour
estimation for proposal
OFFSHORE OTHERS CONSTRUCTION ACTIVITES
• Preparation of Project and Construction Execution plan, Constructability Report, and progress reporting procedures.
• Support Company for commissioning Detect design changes/errors and inform lead construction engineer before proceeding with corrective action. Communicated with Subcontractor to capture the changes and rectify the errors.
• Site representative during installation, including mobilization preparation, monitoring of compliance of Onshore and offshore activities, external & internal notification, HSE Inspection/audits technical and commercial clarification.
• Communicated and provided feedback to Construction lead with regards to all site activities including design problems, clashes and material shortages.
• On Shore phase - preparations of Electronic Permit to Work System
“Offshore Manager” to be utilized offshore including creation of Permit to Work procedure.
• Supervision and verification from client side of contractor T&I and construction team.
• Supervision of Jackets & Platforms Transport & Installation activities.
• On Shore phase – Initial requisitions, preparation of various procedures and necessary checklist for planned operations during construction and commissioning phase.
• Takeover platform form Shipyard and setting up permit to work system and Emergency organization.
• Verification of documentation related to T&I and construction activities offshore, planning offshore activities and review and site, coordinate with the offshore barges / vessels and client rep’s, manage Company hired vessel operations and vessel readiness.
• Off-shore Cable laying.
• Reviewed the Contractor/Vendor Qualification and Monitoring Procedure qualification of works.
• Checked and controlled the consumables used to ensure compliance with Controlling Procedure.
• Reviewed query logs prepared by the discipline to ensured timely resolution of outstanding queries and take up at Project level for resolution of queries that have an impact on quality, schedule and budget.
• Assessment of technical and marine preparedness for offshore operations.
• Prepare record of discussions of the weekly review meetings and monitor the action plan agreed.
• Participated in HAZID, HAZOP, Constructability, interface co-ordination meeting, marine installation, SIMOPS, Risk management. projects, FEED and Detail
engineering stage.
• Experience in OIL & GAS,
Hydrocarbons, Pipeline,
WTP Projects etc.
• Interfacing with Client and
vendors and providing
technical support to
procurement team.
• Preparation of
Construction Work-pack
and Site support for
construction &
commissioning.
• ELECTRICAL ENGINEERING DESIGN
o Attend to the project weekly meeting to discuss and report the deliverable document status, identify and maintain the document or drawing which can be issued with appropriate note, while waiting the data available in order to achieve the progress.
Check and make sure the consistency data which used for engineering design such as: calculation report, specification, data sheet. COORDINATION WITH PROCUREMENT TO PROCURE MATERIAL
• Having good experience and familiar with the Procurement procedure, as mention below but not least.
• Coordinate to the Procurement Coordinator to arrange technical documents, drawings and other documents related for Procurement.
• Participation in Technical query meetings raised by vendors / Suppliers
/ Manufacturer.
• Preparation and Review Pre-Vendor Qualification & technical recommendations of Vendors.
• Coordination with Procurement Team / Coordinator for monitoring and Control of materials
• Specifying and Procurement of Project related facilities materials using API, IEEE, NFPA, ICE, NEMA and BS Codes and Standards.
• Follow-up long lead items, MTO and BOQ from engineering department.
• Coordinate with engineering department for deliverables
(Specifications, Datasheets and Material Requisitions).
• Follow-up TBE with Engineering and Procurement department.
• Coordinate to the Procurement Coordinator to arrange technical documents, drawings and other documents related for Procurement.
• Follow-up the status of technical queries raised by vendors / Suppliers / Manufacturer from Procurement department.
• Preparation of MPTR (Material Procurement Tracking Register)
• Follow-up Pre-Vendor Qualification list.
• Follow-up with Procurement Team / Coordinator to get status of materials.
• Follow-up the Finalization of Technical Bid Evaluation of all long lead items as per Project Specifications.
Declaration
I hereby declare that the above written particulars are true to the best of my knowledge.
Doha-Qatar Your Sincerely
30/10/2024 Mohd Azad Ali
CODES AND STADARDS
• API
• IEEE
• BS
• NEMA
• NFPA
• IEC
• KH
• QCDD
• NFPA
• QCS2014
LANGUAGES
• Hindi – Fluent
• English – Fluent
• Arabic- Average
• Urdu-Fluent
PERSONAL DETAILS
Date of Birth: -22 Feb.1992
Marital Status: - Single
Gender: Male
Religion: Muslim
Nationality: Indian
Driving License: Qatar, India
Visa Status: Transferable
CLIENT AND CONTRACTOR
• IOCL
• QATAR RAIL
• SUHAIL HOLDING
• AAB
• QATAR FOUNDATION
Contact this candidate