Instrument Technician Saudi Arabia
Resume:
Moises Casas
Electrical Industrial/Instrument Technician
Villanueva 9002
*************@*****.***
I'm Moises Casas certified TECHNICIAN 3 category Institute 1st Refrigeration and Air Condition, 2nd Electrical 3rd Instrument Technician.
Institute of Technical Education Skill Development Authority 1st Refrigeration Air Condition technology 2003 - 2004. Specialist of Installation, services, Maintenance and catering shop. 2nd electrician technology 2007-2008
Responsible of installation, services, maintenance and cater commercial, residential and industries. 3rd Instrumentation Technology 2012-2014
Specialist of calibration, installation, repair troubleshoot and maintenance equipment and machinery. Willing to relocate: Anywhere
Work Experience
Instrument Technician
Al Rushaid Construction Company LTD. /EEI CORPORATION (ARCC/EEI)-Al Khobar July 2012 to November 2022
• Instrument Technicians AL RUSHAID Construction Company Ltd./Eei Corp. Al Khobar Saudi Arabia From 09 July 2012 to 30 Nov. 2022.
• From Samref clean Fuels project.
Yanbu Saudi Arabia 09 July 2012 to 30 May 2014 instrument technician
• Estimation computation of cost. Incoming materials
• conduct planning,data sheet, drawing. Location, P&ID, ILD and hookup drawing
• Installation of Instrumentation equipment.
• Intallation transmitter pressure, Level, temperature, flow.
• Install element temperature,flow, venture, ore piece and Annubar.
• Impulse tubing,test pneumatic
• Install bench calibration
• calibrate, trouble shoot, loop check, configure and simulate
• knowing the process variables flowed, pressure, temperature, level and Ph
• understand primary elements used for flow measurement orifice plate, venturi tube, pitot tube, annular
• Knowing Orifice plate facing refer the mark of tab facing to high pressure side
• install impulse tubing of a different pressure liquid, gas and steam
• Knowing of service tapping below liquid service, tapping above gas service and tapping below orifice plate with condensate pots should be same level
• commissioning functional start up and warranty maintenance
• KGOK GAS & Condensate Export System Project. . Al KHAFJI Saudi Arabia 24 Nov. 2019 instrument technician
• Installation of instrument equipment and component and machinery
• Installation of bench calibration
• Calibrate instrument equipment pressure transmitter, gauge, level and CV
• Install Power supply 220v ac and voltage regulator inverter 24 v DC.
• Install transmitter, Druck, resistor, hart communicator and documenting process calibrator also hand pump
• Maintenance and troubleshoot of Motor operated valve (MOV)
• Installation of transmitter, control valve, JB, marshalling rack and DCs
• Loop check, configure and simulate
• Conduct draw any flow control loop
• Saudi Aramco Abqaiq plant Restoration Project Abqaiq Saudi Arabia 20 Dec. 2018 to 08 -Dec. 2020 instrument technician
• Installation of bench calibration
• Calibrate instrument equipment Pressure transmitter, pressure gauge, level gauge
• Installation of instrument equipment in field and control room area
• Install transmitter and Cv, Jb, marshalling rack and DCs.
• Dismantling, assemble, repair, install and restore.
• Cable pulling, design new measuring and recording equipment.
• Commissioning, configure, test, functional and solo run power up maintain troubleshoot and repair
• Dewatering system & oily water sump pit project 29 Jan. 2021 to 30 Nov.2022 Abqaiq Saudi Arabia instrument technician
• Fabricate stanchion and frame
• Install stanchion and transmitter, pressure,level,and flow.
• Install element temperature, flow, venture and annular.
• Test pneumatic and hydraulic.
• Petro FCC REVAMPING PROJECT Limay Bataan EEI Corporation 11 June 2007 to 18 January 2008 electrical industrial
• Responsible Estimation computation of cost materials incoming
• Conduct planning, layout drawing, schematic diagram, location drawing
• Discuss hazardous and safety precautions
• Installation of electrical equipment.
• Installation of cable Race way conduit and tray
• Cable pulling and dressing, cable testing continuity test, insulation resistance test
• Termination low voltage and medium voltage, cutback, insulation tube,terminal lugs, crimp,heating, glancing and torquing with marking
• Maintenance of facilities and offices.
• Install Mts,ATS, UPS,Mdp,transformer, Dp and termination cable lines
• Installation branches circuit breaker, convenience outlet, switches, lighting or fixtures and Lumination
• Commissioning functional start up Solo run power up operating system
• Warranty maintenance, troubleshoot and repair turn over to owner or customer
• N&N REFRIGERATION REPAIR SHOP Bulua Cagayan de Oro city 24 April 2003 to 06 Jan. 2004. Refrigeration and Air Condition Technician
• Services Electrical system of window type Airconditioning and Domestic Refrigeration units
• Services Maintain window type Airconditioning and Domestic Refrigeration units
• Troubleshoot window type Airconditioning and Domestic Refrigeration units
• Repair window type Airconditioning and Domestic Refrigeration units
• Repair refrigerator, upright freezer, chest freezer and chiller cooler
• Replace compressor and fan
• Over haul,welding, breezing.
• Evacuations flushing, vacuum, pump up and down, flushing evaporator and condenser.
• Services commercial, residential, school and subdivision. Installation of split type, window type, cartridge and charging.
Industrial Electrician
EEI Corporation-Quezon City
June 2007 to January 2008
• Install, repair and maintain electrical equipment. Insure safety by observing the local state. And National electrical code regulations that pertain to work.
• Inspect electrical components including transformer and circuit breakers.
• Testing devices to identify and report electrical problems. Use hand and power tools. Adhere to state and local building regulations.
Refrigeration and Aircondition Technician
N&N Refrigeration Aircondition Repair shop-Cagayan de Oro April 2003 to January 2004
>Assemble, install, maintain and repair heating, cooling a Refrigeration system and equipment.
>They may install ducted air conditioning in a family home. Or build large walk in Refrigeration units for business needing mess food storage.
Education
Technology in Instrumentation
ARCC Company Training Rogram - Al Khobar
July 2012 to October 2014
Instrument Calibrate and installation,loop check, open loop, close loop,valve stroke, configuration, simulation, diagnose, troubleshoot, repair maintenance equipment and controls of machinery. Technology in Electricity
Technical Education Skill Development Authority - Tagoloan June 2007 to January 2008
Installation of electrical equipment and components,cable race way conduit, cable tray, cable pulling, Cable testing insulation resistance/ continuity, lighting fixtures,outlet, switches and panel and teansfoeme.
Also Services of commercial, residential and industries/ Maintenance Technology in Refrigeration and Aircondition
Technical Education Skill Development Authority - Tagoloan April 2003 to January 2004
Installation equipment and machinery of AC and refrigeration units. Planning layout/drawings.
Install electrical equipment and components.
Install copper tubing/flaring, swaging
Welding if needed, soldering and brazing.
Evacuation gas line system flushing, vacuum.
Charge and recharge/purging.
Servicing commercial, residential and industries.
Repair dismantling and assembling
Solving problem/ troubleshoot.
2nd year Bachelor Science Mechanical Engineering in Mechanical Engineering Technology
Capitol University - Cagayan de Oro
June 1996 to March 1998
Starting my job experience is a refrigeration and air condition technology at N&N refrigeration repair shop. Since 2003 to 2004 I achieve the certificate of training program untill 2008 Jan. 8 certificate missing 2nd Electrical Industrial at EEI CORPORATION training program sponsor since 2007 to 2008 certificate of completion until 2012 Jan.
3rd Instrument Technician at Al RUSHAID CONSTRUCTION COMPANY LTD./EEI CORPORATION training program Sponsor since 2012 to 2014 certificate of appreciation until 2022 certificate of employment 4th electrical industrial october 25,2023 to october 6,2024 degital certificate clearance. Skills
• Electrical Experience (10+ years)
• Welding (3 years)
• Low Voltage (10+ years)
• Schematics (5 years)
• Refrigeration (5 years)
• Fabrication (10+ years)
• Assembly (10+ years)
• Equipment Repair (10+ years)
• Programmable Logic Controllers (5 years)
• Plumbing (5 years)
• E&I (10+ years)
• Customer service (10+ years)
• Troubleshooting (10+ years)
• Maintenance (10+ years)
• Computer Networking (10+ years)
• Microsoft Office (5 years)
• Calibration (5 years)
• SolidWorks (10+ years)
• Distributed Control Systems (6 years)
• Microsoft Word (5 years)
• Blueprint Reading (5 years)
• Sensors (5 years)
• Manufacturing (5 years)
• Field Service (10+ years)
• Field Service (8 years)
• English (10+ years)
• High Voltage (5 years)
• Precision Measuring Instruments (5 years)
• Laboratory Experience (4 years)
• Mechanical Knowledge (4 years)
Languages
• English - Intermediate
• Tagalo, Besaya - Fluent
Certifications and Licenses
Certificate of Appreciation/ RAC Technology TESDA
April 2003 to January 2004
Services Installation and Maintenance
CN: HVAC 2003-020B
OSHEMS TRAINING RECORD CARD/59258
October 2023 to Present
TR01 - General OSHEMS Induction
Training Course
TR02 - Site Specific OSHEMS Induction Training Course TR03 - Working at Heights
TR04 - Hot Works Safety
TR05 - Excavation Safety
TR06 - Confined Space Safety
TR07 - Lifting and Rigging Safety
TR08 - Hazardous Energy Control
Training (Lock Out and Tag Out)
TR09 - First Aid & Basic Life Support
Training
TR10 - Construction Occupational
Safety and Health
TR11 - Supervisory Training
Observation Program
TR12 - Appreciation Course on
OSHEMS Standard
TR13 - Orientation on OSHE -Related
Laws and Regulations
TR14 - Course on Problem Solving
National Certificate II / Electrician TESDA
September 2023 to September 2028
Electrical Installation Maintenance Certificate No 231*********** ULI: CMB -77-094-*****-***
Certificate of Appreciation /Instrument Technician Samref Clean Fuels Project July 2011 to May 2014
Installation Instrument Calibrate and Maintenance
Thomas Russ : Area Construction Manager - W PAL
Certificate of Appreciation /Instrument Technician AL KHAFJI JOINT OPERATIONS
April 2017 to November 2019
Instrument Calibrate and installation
KJO: 230-4590
Certificate of Employment / Instrument Technician -A Al Rushaid Construction Company Ltd.
July 2012 to November 2022
Instrument Calibrate and Installation
C.R.205*******
Construction Division Project Clearance Certificate / Electrical Industrial PETRO FCC REVAMPING PROJECT
June 2007 to January 2008
Installation electrical equipment and Mainand machinery E8284-9288-4109-6987
Certificate of Completion/ Practical Driving Course ALEXI DRIVING SCHOOL July 2023 to July 2024
Authorized driving private Manual Vehicle and Manual Motor Cycle. Permit no:K17-23-S01494
Contact this candidate