Electrical Engineer X-Ray

Peter Matta

Contact Information:

Address : Concord, California, 94521, U.S.A.

Cell Phone : 925-***-****

E-mail : *****.*.*****@*****.***

LinkedIn : https://www.linkedin.com/in/petermatta/ Personal Information:

Nationality : Dual nationality Egyptian, American.

Electrical Engineer – Systems and Biomedical Engineer.

Egyptian Syndicate of Engineers Member.

Federation of Arab Engineers Member.

Career Objectives:

To pursue a challenging growing career in the field of Electrical Engineering. To find a suitable position where I can commit to and apply my experiences to excel and help in achieving the company mission.

More than fourteen years of work experience:

Experience (at USA):

Ten years of work experience in troubleshooting and fixing Biomedical Devices, Semiconductor machines (Semi/Bio Equipment), automation systems and Robotics.

Over 5 years of experience with a diverse range of medical devices across multiple clinical settings, including Surgery, Critical Care, Rehabilitation, Labor and Delivery, Patient Monitoring, and Emergency Departments. Experience (at Egypt):

Five years of work experience in maintenance medical devices: 1- Installation and maintenance dental units & panoramic x-ray machines

& x-ray & x-ray Scanners & dental lap devices and all dental devices

(for more than three years and I attended the advanced service training at J. Morita Group Company – at Kyoto, Japan on May-2012). 2- Installation and maintenance for Hemodialysis machines & Water Treatment Stations.

3- Installation and maintenance for lasik devices (ALLEGRETTO). 4- Computer (hardware and software) and internet experience desktop and web programming / development.

5- Won the first prize in the Golden Minds Competition held by Faculty of Engineering - Cairo University (March 2006) for inventing a Protection and Security System that can be used in Banks, Museums …etc. Jobs:

Current Job (at U.S.A.):

Biomedical Engineer at Sutter Health (August, 2022 – Current). Perform a variety of routine and complex tasks associated with installation, service, and calibration of a diverse range of therapeutic and diagnostic instrumentation.

Perform electrical safety test on biomedical instrumentation. Document the introduction of new therapeutic and diagnostic equipment, corrective and preventive maintenance actions, purchase requisitions, and special requests as required in Clinical Engineering’s Equipment management database.

Diagnose and correct system and equipment malfunctions by making repairs or sub-system replacements to ensure that biomedical instrumentation and internal circuitry meets specified requirements. Provide technical assistance and instruction to Medical Center Personnel in the operation and maintenance of biomedical instrumentation.

Coordinate the work performed by service contractors to include maintenance, calibration, installation and verification of service documentation.

Previous Jobs (at U.S.A.):

Service Engineer at Nutcracker Therapeutics, Inc. (March, 2022– July- 2022).

Service Engineer at Hardware Systems Engineering Department to support instrumentation R&D for all Nutcracker Manufacturing Units “NMUs”.

Also support of other Engineering functions for systems engineering and documentation. Work with Manufacturing to maintain NMUs in production.

Biomedical Equipment Technician II at University of California San Francisco, UCSF Health (August, 2021 – February-2022). Perform a variety of routine and complex tasks associated with installation, service, and calibration of a diverse range of therapeutic and diagnostic instrumentation.

Perform electrical safety test on biomedical instrumentation. Document the introduction of new therapeutic and diagnostic equipment, corrective and preventive maintenance actions, purchase requisitions, and special requests as required in Clinical Engineering’s Equipment management database.

Diagnose and correct system and equipment malfunctions by making repairs or sub-system replacements to ensure that biomedical instrumentation and internal circuitry meets specified requirements. Provide technical assistance and instruction to Medical Center Personnel in the operation and maintenance of biomedical instrumentation.

Coordinate the work performed by service contractors to include maintenance, calibration, installation and verification of service documentation.

Equipment Maintenance Technician II at Tesla, INC (September, 2020 – August-2021).

Utilized broad-based industrial maintenance experience, encompassing Robotics, Electrical, Mechanical, Electronics, Welding, Machining, Hydraulics/Pneumatics, Conveyor systems, etc. to maintain steady production flow on Tesla's Model 3 manufacturing line. Performed programming and troubleshooting on KUKA and Fanuc robots. Worked with tooling equipment by Böllhoff, WTC, Fronius, and TOX. Working understanding of PLC’s, HMI’s and SCADA. Diagnosed equipment failures, found root causes, and communicated actions taken to the rest of the team and recommended countermeasures to prevent repetitive breakdowns. Responded to alarms, breakdowns, and production requests quickly and efficiently to minimize downtime and maximize output. Performed major equipment repairs, rebuilds, installations and PM. Used manufacturing systems effectively (MES, Spares Inventory, Issue Tracking). Proficient in the use of Microsoft Office Suite and Kronos. Certified tugger and Fork Lifts and Handling Tool Operation and Programming for Fanuc Robots.

Senior Automation Technician at Mettler-Toledo Rainin, LLC (January, 2020 – August, 2020).

Keeping all machines running perfectly is top priority, cover any trouble calls and cover the preventive maintenance, Support the floor and the production lines and do the changeover when it requires.

Senior Precision Assembler & Test Technician for Robots, ADO, EFEM and stages at Kensington Laboratories (February, 2018 - November, 2019).

Field Service Technician for Semiconductor machines (Semi/Bio equipment) - I was covering the USA and other countries as Taiwan…- at Yield Engineering Systems, INC. (YES), also I was a member of the ECR meeting, Engineering project status meeting and two R&D systems meetings (May, 2016 – September, 2017).

o Quality Control & Performance Test Technician (team leader) for semiconductor machines at Yield Engineering Systems, INC. (YES)

(January, 2016 – April, 2016).

o Electrical and Mechanical Assembler for semiconductor machines at Yield Engineering Systems, INC. (YES) (December, 2015). Previous Jobs (at Egypt):

Field Service Biomedical Engineer for all dental units and devices (Self employment) (January, 2013 – September, 08, 2014).

Field Service Biomedical Engineer for Hemodialysis devices “B. Braun”

& water treatment stations at High Tech for projects & Trading S.A.E.

(January, 2014 – August, 2014).

Senior Field Service Biomedical Engineer for digital systems

"Panoramic Devices & x-ray machines, scanners, x-ray sensors, internal oral cameras and dental units and devices" at Safwan Egypt

(July, 2013 – November, 2013).

Field Service Biomedical Engineer for lasik devices "ALLEGRETTO" at High Tech Egypt (Alcon's WaveLight lasik devices) (October, 2012 – June, 2013).

Field Service Biomedical Engineer for dental units and dental devices at General Egyptian Trading (GET) (May, 2011 – September, 2012).

Sales Engineer For Biomedical Devices at Cairo Med. Egypt (C.M.E.) - biomedical company working in ultrasound devices (January, 2011 – April, 2011).

Production Engineer (temporary job) at Flora - Pyramids Paper Mills

(S.A.E.) (September, 2009 – January, 2010).

Courses and Programming Languages:

International Computer Driving License (ICDL).

C++ programming language.

C# programming language.

Structured Query Language using (SQL Server 2000).

Hyper Text Markup Language (HTML).

Languages:

Arabic : Mother Tongue.

English: Very Good in reading, writing and speaking. Training:

ZOLL R Series Preventive Maintenance (December, 2022).

Hillrom / Welch Allyn Service training certification, CVSM 6000 Service & Repair (November, 2022).

ALTHEA Injector Training BAYER / MEDRAD contrast Injector Service Training (October, 2022).

J. MORITA Group Company – at Kyoto, JAPAN - for dental devices, installation and maintenance especially for apex locator devices, dental units, x-ray devices and panoramic x-ray machines (May, 2012).

Egyptian International Pharmaceutical Industries Company

(EIPICO) (July, 2003).

The French Kasr El Aini (August, 2003).

Heart institute (July, 2004).

Medical Service [at the company site at New Kasr El Aini Teaching Hospital Operations Department] (July, 2005).

Participated in the second conference of Scientific Associations for under graduate (March, 12, 2006).

Related Field Projects:

Power supply with variable output voltage levels (0~18v).

Electrical trap.

Security system controlled digitally.

ADC & DAC.

Interface circuit with the computer (Parallel Port).

Organizer software using C++.

Program to implement the Cardiology department using SQL 2000 and interface it using C#.

Knowledge:

Data Structure and Algorithms.

Database System, File Structure and Programming.

Hardware Design, Logic Design, Logical Circuits, Microelectronics and Circuits.

Psychology.

Mechanical Engineering: Static/Dynamic Mechanics, Fluid Mechanics and Thermo Dynamics.

Physiology, Anatomy, Biochemistry and Biology.

Bio-analysis.

Measurement Fundamentals.

A professional Windows OS user.

Researches:

Medical gasses networks applications at hospitals.

Oxygen sensors and wireless Oxmeters.

Detectors in radiology.

Virtual design of C.T. (Computed Tomography).

Education:

Electrical engineering - Systems and Biomedical Department, Faculty of Engineering, Cairo University, Egypt. (2004 – 2010). o Bachelor’s degree in engineering (5 Years college).

Military Technical Collage. (2001 – 2003).

[Orman School, Giza, Egypt] (1998 – 2001).

o High School Certificate, with grade 93.9%.

[Orman School, Dokki, Giza, Egypt] (1995 – 1998). o Preparatory Studies, with grade 95.6%.

[El Kawmeya Agouza Private School, Agouza, Giza, Egypt]

(1990 – 1995).

o Primary Studies, with grade 96%.

Contact this candidate