Hvac/ facilities Technician
Resume:
Renato Calderon
Fairfield, CA *****
*********@*****.***
I want to utilize my skills and knowledge in a professional and positive environment. I want to be a helpful addition to a maintenance team and maintain equipment to the highest standard. Work Experience
HVAC Technician
Mechanical Products of Nevada – Reno/Sparks, NV February 2023 to March 2023 During the short time at MPN I was able to gain knowledge quickly of the custom units and controls. I was able to complete repairs that had been on the books for months. Repairs included brazing, fixing flare fittings, leak checking, placing circuits in vacuum and charging to factory charge. I was a part of contruction activities including the installation of air handling units and fluid coolers.
JLL @ Genentech Vacaville - Vacaville, CA December 2019 to June 2022 Perform HVAC duties across the site including but not limited to Air handlers, Liebert server room units, VAV boxes and TEC controls, walk in cold rooms and freezers. Part of my duties included programming replacement TEC’s and going over BAS Insight issues with Siemens controls representative. Part of the HVAC troubleshooting and repair also involves confirming and resolving building differential pressure issues with Genentech HVAC and automation engineers. Daily tasks include, but are not limited to performing PM’s and scheduled work for invasive and non-invasive GMP work. All aspects of GMP HVAC- R are on our schedule/back log for the resolution of HVAC work taken over from Genentech HVAC on 01/2020. Senior Mechanic / PM Shift Lead
Plygem - Vacaville, CA February 2018 to December 2019 I currently oversee the PM tasks and maintaining/repairing of all manufacturing equipment for the glass and vinyl lines. There are currently 2 employees that I have under me to help with completion of PM's on the third shift. My duties not only include completing PM's, but also ensuring parts are available and ordered for tasks/repairs. The training of my co-workers is also a part of my duties. This training includes the safety and technical aspects required of us. I am also asked to troubleshoot and repair issues that 1st/2nd shift production were unable to resolve during the day. Start up of all machines and proper operation for the 1st shift is critical and verified by myself and my crew. Since I have been on the PM shift the down time of equipment has reduced greatly, I have also taken on updating PM's tasks lists and verifying that the proper intervals are as efficient as possible. Asst. Facilities Planner
Genentech - South San Francisco, CA July 2016 to February 2018 I was tasked with helping the planning group with the maintenance plans associated with GMP equipment. I maintained the queue for all creation, deactivation, and changes to any maintenance plans that were for PM's, Cal's, and Inspections of equipment. In the short time with Genentech, I was able to process forward over 230 work notifications that were in the queue. In addition, I helped other planners with CR's for Out of Commission systems by addressing active work orders and notifications left for equipment.
Packaging Mechanic
Owens Illinois - Fairfield, CA
February 2014 to July 2016
My normal routine consisted of working on the packaging lines maintaining production equipment. I do repairs and preventative maintenance on case erectors, glass bottle packers, palletizers, De-bulkers, and Conveyor systems. I perform equipment changeovers on the production lines for the different types of wine and beer bottles that orders call for. GMP Maintenance Mechanic
Novartis Vaccines and Diagnostics - Emeryville, CA June 2012 to February 2014 My duties included maintaining and repairing GMP equipment and systems related to the manufacturing and testing of the site's products. I respond to alarms as needed and complete work orders as requested. Systems include but are not limited to clean and dirty water, steam, and air systems. I also maintain and troubleshoot temperature, humidity, and pressure controlled environments, as well as refrigeration and HVAC equipment. Maintenance Mechanic
Abbott Nutrition - Fairfield, CA November 2011 to May 2012 My daily work consists of maintaining and attending to the needs of all manufacturing and packaging equipment. I have performed preventative maintenance on equipment including, but not limited to Conveyors, Wrappers, Case packers, Palletizers, Syrup and Chocolate systems, Mixers, and Kettles. I also do repairs and maintenance on hot water systems and other job specific equipment that are needed for the manufacturing and packaging lines in use. Master Mechanic
Bayer Healthcare Pharmaceuticals, LLC - Emeryville, CA August 2008 to December 2010 My duties have included alarm response for the site's many systems and utilities. I used building automated systems to gain information on environments and equipment status, to better solve problems. I have received training on systems including Finn- Aqua Stills and Clean steam generators and Lyophilization units used for freeze drying cycles. I have performed preventative maintenance duties and logs on equipment including but not limited to Ultra Low Freezers, Auto-Clave, Glass washers, HVAC Units, Waste Neutralization Systems, De-Ionized water systems, and Water For Injection (WFI) Systems. HVAC Technician
Emcor Facility Services - Richmond, CA May 2008 to August 2008 In the short time at the Bayer facility in richmond, I was involved in taking care of refrigerant tracking for the facility. I work on troubleshooting HVAC-R systems and providing support to the lab employees and their refrigeration needs. Facilty Maintenace Mechanic
DEY L.P - Napa, CA March 2004 to May 2008
I maintained and repaired commercial HVAC as well as many other types pharmaceutical/manufacturing systems and equipment. I maintained all HEPA filter certifications and scheduled needed work for lab hoods on the site. Monitored and fixed airflow and pressure situations in clean rooms. Have experience in fixing and calibrating pneumatic VAV controller systems. (TITUS VAV's) I have worked with temperature/ humidity stability chambers. Performed rounds duties and routine preventative maintenance tasks on facility equipment including: Boilers, Stills, De-Ionized Water systems, Pure Water systems, Resin Handling systems, Compressed Air systems, and Chill Water systems. Maintained and set up telephones, video conferencing systems, and Audio/Visual equipment for company wide employees. Education
Certificate/EPA certification in HVAC-R commercial Wyotech-Fremont - Femont, CA
April 2005 to April 2006 Skills
• Conveyors
• PLC controls
• Clean room environment maintaining • Welding
• cGMP
• Boilers
• HVAC/R
• Packaging
• Water systems
• Pneumatic controls
• Telephone
• SAP
• Refrigeration
• Blueprint Reading
• Equipment Repair
• Low Voltage
• Electrical Experience
• Quality Assurance
• Laboratory Experience
• Fabrication
• Plumbing
• Troubleshooting
• Mechanical Knowledge
• Facilities Maintenance
• Manufacturing
• Maintenance
Certifications and Licenses
EPA Universal
April 2006 to Present
HVAC Certification
Assessments
HVAC technician — Expert
August 2021
Designing, implementing, and troubleshooting commercial HVAC systems Full results: Expert Basic mechanical knowledge — Expert
August 2021
Understanding and applying mechanical concepts and processes Full results: Expert Indeed Assessments provides skills tests that are not indicative of a license or certification, or continued development in any professional field.
Additional Information
SKILLS
• cGMP trained
• Clean Room Environments(Pressure/temperature/humidity)
• SAP trained
• HVAC-R Repairs
• Refrigerant tracking systems
• Light welding
• Waste Neutralization Systems
• Water and Steam Systems(GMP and dirty)
• i.e. WFI, RO/DI, Clean Steam, Boilers, & Condensate
• Compressed Air Systems
• Chill Water Systems
• Stability and Cold Rooms
• PLC controls Troubleshooting
• TEC programming/Troubleshooting
• Pneumatic Controls
• Telephone, Audio, & Visual experience
• Glass cut tables
• Vinyl saws, welders and corner cleaners
• Packaging and Manufacturing Equipment
• i.e. Conveyors, Palletizers, Case Packers, Case Erectors Wrappers, Mixers, De-palletizer and Lifts
Contact this candidate