Control Systems Electrical
Resume:
Juvencio Vince Rodriguez III
Houston, Texas 77018 e-mail ********@*****.***
********@***.***
Phone cell 832-***-****
(RESUME EXPERIENCE)
Qualifications:
Worked for AETI Engineering company, for commissioning of large projects, on offshore rigs, Marine ships, installing the DC power system, the commission of the jack-up system, and the electrical/ electronic /VFD systems for other rigs both land and offshore
Worked for drilling company Weatherford Drilling International; when there were problems on rigs located all the world, I was sent to get them back on line and on contract. This work took me in several countries Iraq, Algeria, Thailand, U.A.E., Bangladesh for almost 3 years in Iraq, in the Gharraf region and South Basrah as Electrical Field Foreman for about 3-6 rigs.
Before this working 20 years for the Industrial Process plants and manufacturing industry that produce the Rigs and electrical equipment used on most oil drilling rigs.
05/23/22 to Present
Samson Controls
Field Service Tech
In charge of calibrating, repairing electrical Control Valves used in Process chemical plants, marine, gas plants and pipelines. Working nationally in the US and Internationally.
04/21 to 05/22
Actalent
The Commission of Electrical control systems for large conveyor systems . Overseeing the commissioning of projects for installations of electrical control systems, for VFD equipment and PLC control. Inspect the wiring done by electrical contractors. Troubleshoot electrical control systems for VFD and PLC.
05/13/2019 to 04/14/21
Goodman /Daikin
Electrical Tech
In charge of Electrical Group that do repair of CNC equipment, PLC process systems, Honeywell Heat Control systems. Fanuc Robotic systems. Electrical install of controls and panel control wiring electrical equipment used in manufacturing. Using Rockwell software and Siemen’s software in the use of troubleshooting and reprogramming plc systems. Installing VFD’s and troubleshooting drives for existing equipment upgrades, Types (Allen/Bradley, Yaskawa, ABB, Hitachi, Mitsubishi and Control Technique’s) used at this facility. Repair Electrical MCC’s, used in the facility.
11/05/2018 to 03/5/2019
NOV Rig Systems / Offshore-Lifting and Handling
Electrical Field Service Control Specialist
Providing electrical engineering to Heavy Lifting Cranes, electrical PLC and HMI programs,
Electrical control solutions, solving electrical problems on the electrical crane system.
Troubleshoot and commission ABB drives into VFD Crane System.
1/6/2014 to 11/2018
AETI American Electric Technologies Inc.
Senior Electrical Field Tech
1250 Wood Branch Park Dr
Currently working worldwide and nationwide on Electrical projects of various kinds. The Commission of Electrical control systems for offshore Rigs, land rigs, and marine shipping, overseeing the building and testing of the Jack Up system, for offshore rigs. Overseeing the commissioning of projects for installations of electrical control systems, for VFD equipment and PLC control. Inspect the wiring done by shipyard personnel, and other contractors. Troubleshoot electrical control systems for VFD and SCR driven systems used in all aspects in drilling, Jack-up and motor propulsion. PLC troubleshooting of different types, Allen-Bradley, Siemens and familiar with different types of VFD’S ABB, VACON, A/B, and Converteam-GE drives. Done installations of various SCR drive systems used on both land offshore rigs and marine equipment. Installation of VFD, UPS, PLC, circuit breakers, transformers, cables, MCC’s and generator power control systems for Industrial and Process Oil/ Chemical plants, marine ships, Instrumentation controls.
2010-12/28/2013
Weatherford Drilling International
2000 St. James Place
Houston, Tx 77056
Office +1-281-***-****
Gharraf Project / Basrah-Iraq, Thailand, Bangladesh and Algeria) Electrical Field Foreman
Responsibilities are the Supervision and repairs of several Drilling rigs located in southern Iraq. Equipment that I particularly maintain are for SIEMENS PLC
processors for VFD house for Drill controls and the BOP controls. Repair and install VFD drives, (ABB, GE-Alstom, Allen-Bradley drives) UPS, and Gas detection systems. Calibrate instruments for the Rigs, pressure, temperature, weight and speed. Repair HVAC control systems at various projects. Oversee the installations of electrical projects as Circuit breakers, MCC’s electrical cables,
Coordinate and supervise the usage of the PM System
Monitor the operational performance of the Company’s equipment. Identify areas for improvement.
Assist the Senior Tool pusher prepare purchase orders for the purchase of equipment and supplies.
Review all Operational/Technical bulletins, communicate pertinent points to crew members and implement all directives as required.
Assure that all equipment is properly used and maintained by the rig operating personnel and when applicable, train crews and rig supervisors in the proper handling of electrical equipment.
Manage and oversee the utilization of equipment to minimize NPT.
Accountable to ensure Company’s RAMS (PM system) program is utilized routinely and effectively.
Ensure that equipment is maintained in line with the PM system (RAMS) and BMS.
1/17/2009 – 12/3/2010
Global Energy Services / Louisiana Electric Rig Service
11616 Galayda
Houston, TX 77086
Electrical Field (Service Tech. (Traveled worldwide and in the USA)
Commission Land Rigs built by G.E.S. and LERS
Repair and service of AC/DC Rigs for Offshore, Land Rigs, and Drilling Ships. Generator controls and SCR Drive Systems, installations of Control Systems for Top Drive Systems (Transfer Panels), UPS, and Burner management systems and SCR DC Drive Module calibration.
Troubleshoot Electrical Systems for VFD equipment (GE -Converteam, ABB, and Siemens Drives. Commission and repair Top Drives control systems.
10/6/2006 -1 /13/2009
Cameron
Letourneau Technologies Inc. /Power Systems
O.E.M /LEWCO
6401 W. Sam Houston PKWY.N Houston, TX 77041
Office 713-***-****
(Traveled worldwide and in the USA)
Electrical Field Service Tech: Repair and service of AC/DC Rigs for Offshore, Land, drilling ships, Marine and Dredging Barges. Generator Control and SCR Systems, Installations of Control System for Top Drive Systems, MCC’s circuit breakers electrical buss for power systems.
Commission of Land rigs and offshore rigs, Repair and service of Variable Frequency Drives for Oil and Marine related equipment.
(Top Drives, Rotary Table, Draw works, Mud Pumps)
Drives for Cranes on Dredging Barge’s Control equipment for Generator Power Systems/UPS Systems
Troubleshoot, and repair PLC equipment and programs
Installation of both DC/ VFD, UPS, PLC and generator power control system for Industrial and Process Oil/ Chemical plants.
8/87-10/6/2006
Kraft Foods-Maxwell House Coffee
3900 Harrisburg, Houston, TX 77003
Phone 713-***-****
My responsibilities are such, thru out the Plant, in that I worked in a good part in Electrical Commissioning on various projects that include Shutdowns and Start-ups over seeing Contractors both the Electrical & Mechanical and Electrical Dept. Personnel on projects. Main duties include service, and installation of electrical / electronic systems of all kinds of electrical equipment.
Install Allen-Bradley PLC systems and do some programming, Frequency drives, Servo drives, D.C. drives Motor Control Centers, Relay logic controls, UPS, run conduit& wiring. Some Instrumentation on weight controls. Burner management systems, Flow control valves systems. Build Graphic HTI control systems using RSVeiw32- software
Work with High Pressure CO2 PLC control systems and valve control system to Pressure tanks. Burner management control systems temperature control for commercial ovens.
1/84- 8/87
Azrock Industries
1705 N. Oliver
Houston, TX
SNR Electrician
My duties consisted of handing out work assignments to Electricians. Working with Production Supervisors and Plant on servicing equipment, order parts, plan Shutdowns, and installing equipment. Troubleshooting Electrical equipment, such as Allen-Bradley, GE and Eaton, PLC’S
DC-SCR Control drives, Motor controls-relay logic, VFD drives. Run conduit, wiring and cables. Design of Automated Systems PLC and relay logic and repair of HVAC Refrigeration equipment and controls. Burner management temperature control systems for commercial and Industrial ovens.
2/81-1/84
Dresser Industries: CLECO Air Tool
Division
7007 Pinemont
Houston, TX 77040
Electrical Tech
Responsibilities include Electrical design, electrical and electronic for, NC/CNC Machine repair, specializing in PLC’s & motor controls, Heat Treating Instrumentation, Honeywell Controls and other various machining equipment. Installing conduit, wiring and cables for both office and plant use, also running of computer cable.
6/76- 2/81
The Methodist Hospital
6500 BERTNER
Houston, TX- (Texas Med Center)
Electrical Supervisor
My duties were to issue work assignments to Electricians under my supervision. Repair various hospital equipment, Motor Control Centers, repair & PM heavy commercial laundry equipment, UPS systems, Honeywell Building Controls, and Power Plant Maintenance. Boiler Control Systems, HVAC Refrigeration Controls, Emergency Power Control Systems. Oversee all Electrical Construction done by Contractors. Familiar with the Hospital policies, regulations health codes and NEC rules. Work with Emergency Power generators control systems and switching gear, run conduit, wire, and cables.
6/74 - 6/76
United States Industries: Wyatt Division
6300 Kanas St.
Houston, TX
Electrician: Reponsilbilates include all aspects of Electrical Maintenance, Motor Controls, D.C. drives, Overhead cranes, welding equipment, Lighting & Power circuits, welding positioners as well as conduit, wiring and cables.
Heat Treating Instrumentation, Honeywell Controls and other temperature control equipment.
EDUCATION
S. P. Waltrip High School
W34 ST.
Houston, TX
Vocational Schools
H.C.C. –Industrial School of Electricity
H.C.C - Houston Technical Institute
Penn Foster College
CLASSES at HTI (Houston Technical Institute)
Basic Electrical Theory
Basic Electronics
Electrical Motor Controls
Advance Programmable Logic Controls
Domestic / Commercial A/C Refrigeration
AC/DC Generator Controls
Power Distribution and Construction
Technical Plant Training provided by the Following
Technical Support Training Centers
Siemens Technical Support Training: AWC Training Center
Houston, Texas
Courses: S7-PLC programming 1 and 2,
TAC programming1
Siemens VFD system
ABB: VFD Systems
AETI-training center Houston, Texas
Allen/Bradley Service Training Center:
Woodlands, TX
Allen/Bradley PLC (Programmable Logic Controllers)
PLC Processors: PLC2, PLC3, PLC5
PLC 2/16,2/30, DATA HIGHWAY
PLC 3
PLC5 (5/15,5/25,5/30,5/40,5/60, DATA HIGHWAY PLUS
SLC500 SERIES (5/01,5/02,5/04)
SLC 100 SERIES (SLC50, SLC150)
A/B FREQ.DRIVES FROM 1HP TO 200HP
A/B SMC (SMART MOTOR CONTROLERS)
A/B 6200 SOFTWARE
A/B RS LOGIC PLC5 SOFTWARE
A/B RSVIEW32 GRAPHICS SOFTWARE (FOR HUMAN MACHINE INTERFACE)
GENERAL ELECTRIC TRAINING CENTER; HOU.TX
GE SWITCHGEAR
GE MOTOR MAINT.REPAIR
GE PLC TRAINING (PROG & INSTALLING)
GE ADVANCE MOTOR CONTROL TROUBLESHOOTING
GE Alstom Frequency Drives: MV 3000
Basic Operations & Maintenance
CUTLER-HAMMER TRAINING CENTER; MILLWAKEE, WIS
C-H PLC TRAINING (PROGRAMMING)
,
Unico Frequency Drives: training at Weatherford Drilling International training center – Abu Dhabi, UAE
TELEDENKEN SOFTWARE RESOURES INC.
TOPDOC Advance PLC Program Development and Documentation Software
TD-2,TD5
WINDOWS SOFTWARE
MS-DOS
MICROSOFT WORD
Siemens Training Centers: Houston, Texas
Siemens Frequency Drives
Siemens Simatic S7, Step7 Software
S7 Programming 1
Training provided by Cameron/ Letourneau Technologies Inc.
LTI VFD Software Drive Coach
LTI Rig Communications
LTI Top Drive Maintenance Training
Contact this candidate