Technical Advisor Customer Service
Resume:
Felix Algarin Plaza
************@*****.***, ************@*****.***
SUMMARY
A self-motivated professional with over 15 years of experience in the Oil and Gas, Power Generation, Petrochemical, Pharmaceutical and Field Service. Committed to contribute with my acknowledgment and my skills. Lear new system, and new technology. Dedicated to providing outstanding customer services. Experience includes:
Demonstrated prominent leadership ability. Instrumentation Foreman.
Received excellent customer service feedback from an array of customers
Designed and produced electrical and Instrumentation schematics, drawings, network topology, and blueprints for various types of control panels
I&C Supervisor
Controls Technical Advisor Mark V to MKVIe Upgrade
Technical Advisor / Water and Process Division
1.5 MW Wind Turbine Upgrade
Controls System Upgrade
Network Installation and Configuration Support
Installed (Construction face), Pre- commission and Commission new instruments and DCS systems
Work with and supervises deferent nationalities and cultures
Coordinate with vendors visits on site and distance support
SKILLS / CERTIFICATIONS
Technician RSLogix5000 Basic Ladder Logic Programming- Certification
TDC-3000 Fundamentals- Certification
Gas Turbine OPS and Marks* Controls Retrofit- Certification
MKVI/MKVIe Controls and Complicity Training - Certification
1.5 MW Wind Turbine Commissioning and Maintenance- Certification
Excel, Microsoft Word, Access, Power Point and Microsoft Word
Controls Technical Advisor Training
EXPERIENCE
07/2023- Present
FieldCore
Controls Technical Advisor, DCS Engineer for New Installations Heavy -Duty Gas Turbines, HRSG and Aeroderivative Turbines.
Prepare and power up panel
Completed panel Check
Backup controls software
Verify grounds on the system and troubleshoot problems
IT/OT support
Verify proper faction of operator Screens and correct as require
Network installation and configuration
Configure cards
Verify configuration of all IO points on cards and verify wire information, cable information and device descriptions
Verify correct termination of all field wiring to cards
Verify signals from field device functionality
Performance initial calibration of all regulators-controlled valves and IGV
Create trend files
Interpretate Network Topology diagrams, Electrical and P&IDS
Software and Hardware changes and red lines
Perform Downloads
Performance changes as requested on TILs
Support performance and DLN Tuning
Created Pac Cases
Old units Upgrades
07/2021- 07/2023
New Fortress Energy
DCS Engineer
Work with all related to the automation of the terminal
Rockwell PLC (5000)
Instrumentation Troubleshooting
I/T-O/T support
HIM modification
New modification and installation coordination
Contractor assistance
01/2018-07/2021
FieldCore
Controls Technical Advisor and DCS Engineer New Installations & Old Units Upgrades Heavy -Duty Gas Turbines and HRSG.
Prepare and power up panel
Completed panel Check
Backup controls software
Verify grounds on the system and troubleshoot problems
IT/OT support
Verify proper faction of operator Screens and correct as require
Network installation and configuration
Configure cards
Verify configuration of all IO points on cards and verify wire information, cable information and device descriptions
Verify correct termination of all field wiring to cards
Verify signals from field device functionality
Performance initial calibration of all regulators-controlled valves and IGV
Create trend files
Software and Hardware changes and red lines
Perform Downloads
Performance changes as requested on TILs
Support performance and DLN Tuning
Created Pac Cases
08/15-01/18 SADARA Petrochemical, Jubail, Kingdom of Saudi Arabia
Instrumentation Foreman (Work Activity Coordinator).
Supervise during Construction phase.
Instrumentation activities planning for Pre- commissioning, Commissioning and startup.
Supervise Loop Test.
Troubleshoot, and diagnose instruments problem (Calibrate, replaces or repair)
Plane daily and weekly activities.
Coordinate instrumentation work between maintenance and operations team.
Instrumentation Maintenance Foreman.
08/14-05/15 Shanahan Engineering Ltd, Kingdom of Saudi Arabia
I&C Supervisor and DCS Support (Emerson Ovation DCS System)
Work during Pre- commissioning and Commissioning on all BOP systems
Perform DCS and ESD Loop Test
Troubleshoot, and diagnose instruments problem (Calibrate, replaces or repair)
Technical Advice with the modification of Emerson DCS system.
Correct and modify operation procedures
Verify and Modify logics
Systems functional Test
09/12-06/14 Procter & Gamble, Cayey, Puerto Rico
PC&IS (Power Controls & Instrumentation Systems) Automation Department
Network Installation and configuration
Troubleshooting and maintaining control systems and hardware for ABB, Rockwell RS Link process control systems, instrumentation, and operator interface terminals for large scale manufacturing. These systems contain multiple PLCs, Servos, HMIs, HART Instruments and Inspection systems.
Honeywell TCD 3000 PLC System Interact.
Communicate with equipment vendors and part suppliers to troubleshoot, order, and improve on equipment and machine design to deliver enhanced equipment performance.
Interpreted ANSI electrical schematics, and P&ID’s.
E.S.O. Backup (Electrical System Owner.
PC&IS Safety Functional Leader
Participated in process implementation and validation
05/11-06/12 Spencer Ogden Energy, London UK and Multiple Location in USA
Controls Technical Advisor
Installed new hardware and software to steam and gas units.
Commissioning and startup the units.
Verification of instruments calibration.
Valve calibration
Mark V to MKVle Upgrade
06/09-06/10 SNC Lavalin International, Bothell, WA (UAE, Abu Dhabi)
I&C Commissioning Supervisor
Calibration and installation of Power Island instruments, Temperature Transmitter, Flow Transmitter, Vibration Probes, RTDs Thermocouple’s.
Supervise the contractors in the installation and calibration of Gas turbine instruments.
Support the client on O&M operations and support GE TA’s during power up and commissioning of the MARK VIe components and trouble shot the MKVIe with GE TA’s.
Reviewing and interpretation of electrical and I&C drawings while completing wiring installation from the field instruments to the control panels motor control cabinet (MCC).
09/08-05/09 Granite International, Tampa, FL
Technical Advisor
MKVI control system installation and commissioning.
Cold and hot loop checks for MKVI control system.
Verified and install modifications to the MKVI control system logics.
Instrument installation and calibration
09/08-05/09 SNC Lavalin International, Montreal, Canada
Instrumentation Supervisor
Direct supervision of contractors in the installation. Calibration and operation of plant construction. Gas turbine, BOP, Steam turbine, Water plant.
Loop check for the MKVIe, LS2100 and EX2100 systems.
Also provide logistical support in the updating of material control
Review and interpret drawings for contract personnel
Advise and supervise contractors in the completion of any and all modifications as required.
Create and update instrument index
Supervise installation of Bentley Nevada Vibration System
Supervise Instrument calibration and installation
Update data for the warehouse for receiving instruments and parts and installation materials
Provide the contractors support at the warehouse in the localization of instruments, parts and material
11/05-05/07 Granite International, Tampa, FL
Electrical and Mechanical Maintenance Technician / Wind Turbine Commissioning Division
Technical Advisor / Water and Process Division
LVDP Retro Crew. Installing CB1, installing K1, K2, connecting the wiring, LVMD Cabinet; Main Cabinet; and End the Converter.
Installing new doors and safety shells for the main and LVMD cabinets
Connecting the wiring, LVMD Cabinet; Main Cabinet; and End the Converter.
Troubleshooting the cabinets after the wiring installations
Shut down main breaker for insulation the turbine verify voltage using multimeter, Fluke 87
Perform inventory and data related to retrofit projects using Oracle 11i based program (E-Service
Operate multimedia filters (MMF) trailers
Operate reverse osmosis filters (RO) trailers
Operate deionization (DI) trailers
Operate heat exchange systems, monitor the temperature
Monitor the turbidity (NTU), chlorine using the colorimeter, CO2, TDS
Monitor the resign in the mix bed tanks
Verify, check, installed or fix valves for the different trailers
Install houses for the water process
Fill daily reports for the customer
Perform Backwash to the water trailers
Add additional lines as needed for your job history
EDUCATION / TRAINING
Mark VIe Gas Turbine Control System Advanced Training, 03/18
GE Houston Learning Center, Houston, TX
Journeyman Electrician, 04/14
Escuela Técnica de Electricidad, Carolina Puerto Rico
Technical Courses
Instrumentation Engineering Technician, 05/03
Instituto Tecnológico de Puerto Rico, Rio Piedras, Puerto Rico
Associated Degree
Chemical Engineering Technician 05/00
Instituto Tecnológico de Puerto Rico, Rio Piedras, Puerto Rico
Associated Degree
LANGUAGES
English
Spanish
Contact this candidate