Journeyman Electrician Low Voltage
Resume:
Orlando Chee
Journeyman Electrician
Tsaile, AZ *6556
********@*****.***
Willing to relocate: Anywhere
Authorized to work in the US for any employer
Work Experience
Journeyman Electrician
Ion Field Services - Mesa, AZ
January 2023 to April 2023
Lead: Install Panels, Pull boxes, conduits for basketball and soccer field score boards. Ran majority of low voltage for all security systems cams, TVs and Data control inside the building. Journeyman Electrician
Tradesmen International - Queen Creek, AZ
September 2022 to January 2023
Lead/ Foreman: Read prints and Schematics Layouts get crew well inform on task that needs to get done do all safety checks, gather all materials for crew. Communicate and work with crew. Install: Install high low voltage panels 75kv Transformer, Jboxes for conduits from panels to point A to point B pull wires low and hi Voltage. Put fore alarm panel ad install Lighting circuit. Journeyman Electrician
MMR Group - Tempe, AZ
April 2022 to September 2022
Leadman: Reading Blue prints & schematics
Layouts for crew of eight.
Lead for all conduit install for data
Hall 4 and 5 raise floor.
Communicating with co-workers
Foreman and Supervisor.
Installation: Installed supports & conduits.
Installed: UPS,STS,PDU,MCBS,RPP
ATS, Panels 120,208,277,
Panels & Transformers.
Install all supports 3/4,1",2",4" Conduits and Flex.. Used triple nickel & table bender for all Conduits Termination: Terminate Panels, Transformers120v 208v 277v and 480v. Terminate UPS, ATS, RPP STS, MCBS and UPS.
Journeyman Electrician
Ion Field Services - North Dakota
December 2021 to April 2022
Leadman: Layouts read prints & schematics
Communicating with co-workers
Foreman, and Supervisors.
Installation: Installing Panels, J boxes
Conduits 1/2 to 2 1/2 pipes and
Equipments.
Termination: Terminate Panels, Transformers
120v, 208v, 277v and 480v
Wire pull: Pull #8- 16g wires low voltage and
High voltage wires
Journeyman Electrician
Tradesmen International - Tempe, AZ
September 2021 to December 2021
Leadman: Read prints, schematics and do all
Layouts for Distribution, power, Lighting
and Equipment setting.
Install: Transformers, Panels, Disconnects
all from 120v, 277v and 480volts.
Conduits from 3/4" to 3 >" and
supports for conduits and panels
Wire pull: 500mcm, 250 mcm, #8,#10#12
wires. Using tuggers and wire
pulling equipment.
Terminate: All 120v, 277v and 480v Panels
Transformers, Disconnects and all
Power and Lighting.
Journeyman electrician
Corbins Electric - Phoenix, AZ
December 2020 to August 2021
Leadman for foreman name Francisco Ramirez @ Corbins electric. Lead for the Distribution in all Electrical rooms @ Microsoft 80 in Goodyear Az.
Installing:A. Switch gears MSBS main for. facility. Install busbars were Gears meet together. Tighten and Torc them down.
B. Transformers: 45 kv to 75kv
C. Panels: 120v, 277v, and 480v for.
For Lighting, Low voltage power.
and high voltage.
D. ATS systems bolt and secure down.
E. UPS systems install all busbars inside and bolt and secure them down. Reading all Blue prints and Schematics accordingly. Layout all Gears, Panels, and Transformers. Leadman and had a crew of 4 men working with me.
Journeyman Electrician
MMR Group - Baton Rouge, LA
August 2020 to December 2020
Installing: A. Cable trays and cable tray support
B.3/4 -4 in conduits using table bender, triple nickel and hand benders C. Installing Panels, Transformers and Disconnects from 120v, 277v and 480v. D. Pulling cables from 12g to 4160 cables
Using cable Tuggers and feeders.
Termination: 120v, 277v, and 480v, Panels Disconnects and Transformers. Read Prints and Schematics
Journeyman Electrician
DELTA DIVERSIFIED ENTERPRISES - Tempe, AZ
January 2020 to August 2020
DISTRIBUTION : Install all 4" inch PVC and Rid git pipes for 4 Generator's, APS, UPS switch gears for all for Generators, cooling tower's. Read prints and Layouts for Switch Gear locations. Install all buss bars, ground bars for APS and all SWITCH GEARS outside and inside building Pull 500, 600 and 750mcm wires using tuggers and wire pulling system. Terminate: All 500, 600 and 750 mcm wires using Crimpers for Lugs, torque and marking all Lugs. Egging and test all wires especially the ones that go in and out the building. Install all Disconnects and motors inside and outside the building. Install all panels 120v, 208v and 480v along with TRANSFORMERS and Terminate. Installing 1" - 4" conduits, Rid git pipes and PVC conduits. Threading all Rid git pipes to precise measurements for gutters, pull box and termination box. Journeyman Electrician
MMR Group - Long Beach, CA
November 2018 to October 2019
1. Installing rid git pipes from 3/4 - 4" pipes
For lighting, motors, power and controls.
1. Installing cables trays for power, 4160 and controls. 2. Distribution install panels for control BMS panels, UPS panels and PLC panels, heat trace panels, lighting panels and power.
3. Installing Disconnects for motors.
4. Terminating motors, disconnects, heat trace panels, power panels, lighting panels, receptacles and lighting.
5. Reading prints and schematics and doing layouts for apprentice 6. Trouble shoot, Meg and conduit test.
Journeyman Electrician
TechTrade Solutions - Indianapolis, IN
August 2018 to November 2018
1. Installing cables trays 4160 cables for 4 Generator's 2. Installing all Underground PVC for E house to Generator's. 3. Terminating controls and 120v, 480v and install stress cones for 4160 cables inside switch gears inside E house.
4. Install all lighting inside E house and parking lights outside. 5. Install all Distribution panels from 120v, 208v and 480v 6. insall and Terminate Transformers from 120v 480 v. 7. Test all wires 4160, panels and transformers.
Test for conduit, Meggi and controls.
Journeyman Electrician
MMR Group, Inc. - Compton, CA
January 2018 to August 2018
1. TERMINATING: BMS Panels from 9c to 42c wires
PLC panels, UPS panels, 120v, 208v, 480v panels, Disconnects from 120v, 208v, 480v... Transformers from 120v, 277v and 480v Primary and Secondary. Lighting from 120v to 277v and lighting contacts
Motors :120v to 480v motors
Instruments: TTS, Pts, Pacts, FTs
Journeyman Electrician
Helix Electric - Reno, NV
January 2017 to November 2017
Lead/ Foreman
Supervisor: Hector Vazcaino
Contact: 520-***-****
Distribution: Installing Panels, Switch Gear, PLCs, ATS, UPS, Transformers, and Disconnects... From 120v, 208, and 480v...
Conduit Bending: Rid git, Aluminum, and EMT
From 4",3",2-1/2, 2" 1-1/2,1" 3/4 pipes...
Doing 4 point saddles, 3 point saddles, off sets and full 90s Using table benders, triple nickel, Chicago bender and hand benders... Layouts: Panels locations, Switch Gears, Power, Lighting,Transformers, VFDs, smoke dampers, PLCs and Disconnects...
Lighting: Fixtures 2x2, 4x2, can lights, cove lights 5' to 10' dimmers, and 3 ways switches from 120v to 277v lighting...
Wire pulling: 750s, 700s, 500s, 300s, down to #12 wires 120v, 208s, 277s, and 480v...12-2, 12-3 / 10-2, 10-3 Mc cables...Lighting control panels, and dimmers Pulling wires using tuggers, Mule tape, rope, and fish tape... Read and understand blue prints, changes, revised and schematics... Journeyman Electrician
MMR Group - Beulah, ND
September 2016 to January 2017
Layouts: read prints and understand schematics
Distribution: Installing Panels, disconnects, and transformers Terminating: 480v, 277v, 208v, 120v, Panels, transformers, disconnects and motors... Journeyman Electrician
Triad Electric and Controls - Sioux City, IA
July 2014 to September 2016
Distribution : Installing Panels, Disconnects, Transformers, PLC's, ATS, and UPS systems and motors...From 480v, 277v, 208v, and 120v
Conduits : Bending conduits Rigid, Emt, and
Aluminum From 4", 3" 2.5" 1.5",1" and 3/4"
All using Table bender, triple nickel, and hand bender Bending from 4 point and 3 point saddles, offsets from 10, 30 and to 90 and kicks...
Wire pulling : Pulling wires from 4160 3/c, 750mcm, 500mcm, 250s down to #10s, #12s #14 low volts.. Using tuggers, ropes, pulleys and man power...
Instrumentation : Installing intrument panels, 3/c 4/c low volts wires.. Verifying, toning, and phoning out wires...Then terminating at the Panel and instrument side, both ends Cable trays : Installing cable trays from 3", 6" 12" to 4' wide trays...Putting offsets, water falls, dividers, plates, sews, trays on top of one another...
Journeyman Electrician
Delta Diversified Enterprise
January 1999 to July 2014
Distribution : Installing PLC's, ATS, Switch gears, Panels, Disconnects, Transformers and UPS
systems...From 480v, 277v, 208v, and 120v...
Conduits : Bending conduits from 4", 3" 2.5", 1"
and 3/4" for 10, 30 and 90 s, Offsets, rolling
offsets, 3 point to a 4 point saddle...
Using table benders, triple nickel, and hand
benders...
Conduits from Rigid, Aluminum, and EMT...
Solar : Solar fields from 80 to 180 mega watt...1
mile by 2 mile radius...Trenching, installing PVCS For 2" and 1" pvc pipes for transformers,
inverters, combiner boxes and sub-station's...
Pulling wires for AC and DC power...both.
residential and commercial ...
Leadman : Read prints and schematics,Layouts for panels, lighting, power,transformers, disconnects, PLC's, UPS, read print
and understand schematics...
Lighting : Installing 2x4, 2x2 lighting
emergency and normal, j-boxes, exit signs,
dimmers for can lights, cove lights, and parking
lights, switches, 3 way switches, motion sensors,
both 120v and 277v
Education
General in Electrical Engineering
Northern Arizona University - Flagstaff, AZ
August 1996 to May 1998
Associate in Civil Engineering
Northern Arizona University - Flagstaff, AZ
January 1996 to May 1998
Skills
• Msha (4 years)
• Fire Alarm (8 years)
• Solar (5 years)
• Flash
• Blueprint Reading (10+ years)
• Electrical Experience (10+ years)
• Schematics (10+ years)
• Troubleshooting (10+ years)
• Equipment Repair (10+ years)
• Cabling (10+ years)
• EMT Experience
• Low Voltage (10+ years)
• NEC
• High Voltage (10+ years)
• Pipe Threading (10+ years)
• JavaScript
• CAD (10+ years)
• Microsoft Office (7 years)
• Industrial electrician experience (10+ years)
• Commercial electrician experience (10+ years)
• Sensors
• Power tools
• Hand tools (10+ years)
• Programmable logic controllers
• Handyman experience
• Construction (10+ years)
• Renovation (10+ years)
• Blueprint reading
• NEC
• Customer service
• Heavy lifting
• ATS
• Leadership
• Electrical systems
Certifications and Licenses
OSHA 10
May 2015 to September 2020
Journeyman Electrician
Driver's License
OSHA 30
Contact this candidate