Land Surveyor Engineering Design

CARLO CELEBRADOS SANA

New Salata, Doha, Qatar

Contact No. : 50028752

Email address: *************@*****.***

PROPOSED POSITION: LAND SURVEYOR / GEODETIC ENGINEER CAREER SUMMARY

More than sixteen (16) years experiences in geodetic engineering design, construction, supervision and survey of roads (highway, expressway, skyway), structures (bridges, underpass, overpass) and utilities both local and overseas. WORK EXPERIENCES

UNii Engineering Consultant

Doha, State of Qatar

June 2021 – December 31,2023

SURVEYOR

PROJECT HANDLED:

o Construction of North West Bay Development Parks & Roads o West Bay North Beach Development

JOB DESCRIPTION:

Survey inspection for setting out, trench formation, and installation of road crossing ducts

(Irrigation, landscape, electrical, ITS, QAF, Ooredoo, and street lighting ducts).

Survey inspection for setting out, trench formation, and installation tree frame and planter box.

Survey inspection for checking level of roads and footways on subgrade, sub-base, CBM, top of asphalt (base, intermediate, and wearing course) and granite tiles.

Survey inspection for setting out, trench formation, and installation of, kerbstone, sign boards, chambers, traffic poles and gantry.

Survey inspection for setting out, trench formation level, installation of TSE, foul seware, and surface water (gullies).

Review and check the elevation and coordinates of survey checklist and drawings by using AutoCad.

NETWORKS ELECTRICAL & MECHANICAL CONT.CO.

Doha, State of Qatar

February 2020 – May 2021

SURVEYOR – CIVIL

PROJECT HANDLED:

Construction of Link Roads Adjacent to Al Khor Expressway (P43)

Design & Build Al Khor Expressway (P60)

o Survey for setting out and formation level for street light pole and cable, feeder pillar and service cabinet.

o Conduct survey inspection with the consultant, Conduct as-built survey for top foundation and cable. o Prepare as-built drawings.

Place Vendome Mixed Used Development

- Lusail – Qatar Entertainment City

o Prepare shop drawings for Street light, Ooredoo and SSD. Conduct setting out, trench formation and as-built survey.

o Prepare as-built drawings.

KAHRAMAA – various projects

o Prepare shop drawings for LV and MV cable. Conduct setting out, trench formation and and as-built survey.

o Prepare survey field book and GIS drawing to be uploaded in KAHRAMAA system to request for inspection.

AECOM Middle East Limited

Doha, State of Qatar

June 2014 – April 30, 2019

SURVEYOR - CIVIL

COMPANY PROFILE:

AECOM is an American multinational engineering firm that provides design, consulting, construction, and management services to a wide range of clients. PROJECT HANDLED:

o Design and Construct New Orbital Highway & Truck Route (P023) Contract 1

– New Doha Port to Orbital Highway (45 kilometers) JOB DESCRIPTION:

Joint Survey Inspection with contractor in checking survey control points (PBMs and TBMs) as per Qatar Survey Manual.

Survey inspection for setting out centerline of roads and checking level on subgrade, sub-base, cement stabilized material (CSM), and top of asphalt (base, intermediate, and wearing course).

Survey inspection for setting out, trench formation level, pipe alignment and crown level of TSE and storm water works as per IFC drawing.

Survey inspection for setting out and trench formation level for crossing ducts and network line of Electrical LV, MV, ITS, QAF, Ooredoo, and Street light cable works as per approved shop drawing

Survey inspection for setting out (position and level) of foundation for abutment and piers, board pile, column, pier head, bearing plinth of ramp and main bridges.

Survey inspection for setting out (position and level) of base slabs, walls, and top slabs of underpasses.

Survey inspection for setting out on concrete barriers, crash cushion, guard rails, kerbstone, sign boards, and gantry foundation.

Review and check the elevation and coordinates of survey checklist and drawings by using AutoCad.

Assist Assistant Resident Engineer (ARE - Roads) to prepare progress report in road works by using Autocad.

Record all measurements, rod readings and calculation neatly and accurately in the field books as the work progresses.

Prepare daily report to the Senior Highway Surveyor. This includes works orders and daily inspections program.

Assist in the preparation of weekly and monthly reports, if required NCR and surveillance report. J.F. CANCIO & ASSOCIATES

Makati City,Philippines

May 2009 – May 2014

GEODETIC ENGINEER

COMPANY PROFILE:

J.F. Cancio & Associates is an engineering firm composed of highly competent professionals in various engineering disciplines necessary for efficient planning, design and construction supervision of highways, bridges and other transport infrastructure. PROJECTS HANDLED:

Metro Manila Skyway Project (Stage 2).

Ninoy Aquino International Airport Expressway Project and Its Related Road Project

Consultancy Services for the Conduct of Business Case Studies of Selected

Public-Private Partnership (PPP) Project, Phase II, Package I

Detailed Engineering Design of the NLEX-SLEX Connector Road Project

Pre-Construction Assistance of the Construction of Viaduct including Access Ramps From President Garcia Avenue (C5) FTI to Skyway Improvement Project JOB DESCRIPTION:

Create road alignment and profile design using AutoCAD Civil 3D under the guidance of Senior Highway Engineer.

Responsible for checking and perform verification surveys for the Contractor’s stake- out survey for centerline and structures location.

Checking the work by competing traverse closure and bench circuits.

Conduct survey in order to establish the legal boundaries of properties based on legal deeds and title.

Prepare the parcellary and subdivision plans, lot data computation and survey returns of the affected lots.

Conduct research for the acquisition of the affected lots for subdivision works

Coordinate and supervise all survey works and geotechnical investigations.

Maintain daily logs and supplement inspection records with photographs. DMI CONSULTANTS

Quezon,City,Philippines

March 2006 – January 2009

SURVEYOR / GEODETIC ENGINEER

COMPANY PROFILE:

DMI Consultants is a surveying company based in the Philippines which offers a comprehensive selection of dimensional surveying, engineering and specialist surveys. PROJECTS HANDLED:

o Subic-Clark-Tarlac Expressway Project (SCTEX), Clark, Pampanga o 1st Order Leveling NAMRIA Project, Surigao del Norte o Oriental Mindoro Flood Control Project, Naujan, Oriental Mindoro o MacroAsia Mining Corporation Project, Brookespoint, Palawan o Dapitan Water Supply Project, Dapitan City, Zamboanga del Norte JOB DESCRIPTION:

Establish horizontal and vertical control points using total station, GPS, automatic and digital level.

Assist and check the survey works and computations of the survey team

Staking out the centerline of main road, interchange, bridge, and underpass and toll plaza.

Survey of road cross-section for the preparation of laying base course, binder and wearing course and also as- built survey.

Establish GPS control points in Mindoro. Download and process the data.

Conduct topographic survey, profile and cross-section of roads, bridges, rivers and waterways. Staking out the location of boreholes and test pits.

Conduct parcellary survey and staking out ROW limits.

Prepare traverse and lot data computations, subdivision plans and survey returns.

Conduct research for the acquisition of land for relocation and subdivision works. TRAININGS AND SEMINARS ATTENDED

AutoCad Civil 3D

STANFORD IT LEARNING –The Training Division of CIM Technologies Inc. January 2011

Technical Presentation of GIS Standards and mobile Apps for Geodetic Engineers. Geodetic Engineers of the Philippines – Qatar Chapter, Millennium Plaza, Doha, Qatar

March 2018

3D Laser Scanning, Computer Aided Earthwork Volume Computation and GIS Standards for As Built Surveys

Geodetic Engineers of the Philippines – Qatar Chapter, Al Shabeeb Surveying W.L.L and Al Shabeeb Precision instruments (ASPI), Mercure Grand Hotel, Doha, Qatar July 2017

Cadastral Survey and Geographic Information System (GIS) Geodetic Engineers of the Philippines – Qatar Chapter (GEP-Q) PIS-Q Doha, Qatar October 2016

QND95 – WGS84 Coordinate Computation Workshop

Geodetic Engineers of the Philippines – Qatar Chapter and Al Shabeeb Precision instruments (ASPI) September 2014

Surveys and Investigation DGCS Workshop on Enhancement of management and Technical Process for Engineering Design

Department of Public Works and Highways (DPWH), Bayview Park Hotel Manila February 2014

Autodesk BIM and Subscription Seminar

CIM Technologies Inc. Greenbelt 2, Ayala Center, Makati City August 2010

39th Annual Regional Convention, Theme: “Steering the Geodetic Engineering Profession towards Global Competitiveness”, Subic Bay Freeport Zone February 2013

38th Annual Regional Convention, Theme: “Continuing Public-Private Partnership for Effective Land Administration and Governance”, Tarlac City February 2012

27th North Luzon Assembly Meeting, Theme: “Continuing Public-Private Partnership for Effective Land Administration and Governance”, Lingayen, Pangasinan December 2011

35th Annual Regional Convention, Theme: “Awareness of Geodetic Engineers Global Financial Crisis”, Malolos, Bulacan

February 2009

ELIGIBILITY

Licensed Geodetic Engineer of the Philippines

PRC Licensed No. 6985

Holder of Qatar Driving License

No. 281********

Computer Literate

(AutoCad Civil 3D, MS Excel, Word)

EDUCATIONAL ATTAINMENT

Tertiary : Bachelor of Science in Geodetic Engineering Tarlac College of Agriculture

Year graduated: 2005

Secondary : Tarlac College of Agriculture

Laboratory High School

Year graduated: 1998

Primary : Mamonit Elementary School

Year graduated: 1994

PERSONAL INFORMATION

Date of Birth : August 21, 1981

Citizenship : Filipino

Civil Status : Married

Height : 5’8

Weight : 145 lbs.

Language : Filipino, English

Professional Organization : Member, Geodetic Engineer of the Philippines

(GEP – Qatar Chapter)

Contact this candidate