Sr Civil Structural Cad Designer/Civil Engineer

JVG JR *

CURRICULUM VITAE

JAIME IGNACHEV V. GARCIA JR.

(SENIOR CIVIL STRUCTURAL DESIGNER)

Email add: *************@*****.*** / *********************@*****.*** Contact No.+63-967-***-**-** / + 63 2 3 427 06 50

Home address: #234 Saint Peter St. Barangay Holy Spirit Quezon City, Philippines Professional History

Feb. 2023 – Present

Sr. Civil Structural Designer

Solid Rock Civil Eng’g Services

(Mandaluyong City, Phils.)

Apr. 2021 – Jan. 2023

Project Engineer / Sr. Civil

Structural Designer

Guam Advance Ent. Inc.

(Guam, USA)

Oct. 2018 – Apr. 2021

Civil Engineer

Core Tech International Corp.

(Guam, USA) (Finished

Contract)

Feb. 2018 – June 2018

ARCADIS Design &

Consultancy

Senior Bim Modeller

(Manila, Phils.)

Sept. 2015 – Sept. 2017

Fv & Associates Co.

Sr Civil Structural Cad Lead

Designer

(Manila, Phils.)

Nov. 2014 –June 2015

Qatar Petroleum

Designer

(Ras Laffan, Qatar)

July 2008 – Nov. 2014

KEO International Consultants

Senior Structural Cad

Designer

(Abu Dhabi, UAE)

Sept. 2007 – Nov. 2007

KBR-Kellogg Brown & Root

Designer

(Houston, USA)

Mar.2006 – Sept. 2007

BURTHILL Architectural &

Engineering Consultant

Structural Cad Designer

Jaime Ignachev Garcia Jr has a degree in Bachelor of Science in Civil Engineering

& Associate Registered member of Philippine Institute of Civil Engineers, & has worked in local & overseas, gained extensive experience working in different consulting firms. Project done is one of the huge classified multi-billion-dollar underground Hydrocarbon storage facilities. It is considered as one of the largest Civil Engineering Projects in the world located in Kingdom of Saudi Arabia, relevant project experience tunnels, bridges, fuel pipe lines, oil & gas (on-shore

& off-shore), airport, Infrastructure of storm, water & drainage system, roads & highway, high rise buildings, residential, Amphitheatre’s, mono rails, military facilities (Hanger) etc., being involved in areas starting from schematic phase to tender phase.

Project Experience

Key Projects

Solid Rock Civil Engineering Services a Company that provides quality design of Roads & Bridges, Building & Other Vertical Structures, Gas & Fuel Pipelines Master Layout Plans etc., It has it’s main strength a highly qualified professional staff with considerable experience.

Involvement Period: Jan. 2023 - Present

Client: [ Private & Government]

Est. Project Value: [Php475 million]

The Company Offering Services in Structural / Civil Engineering Design and Construction Supervision from Roads & Bridges, High Rise Buildings, Industrial Buildings, Land Development, Cad Design for Architectural, Structural, Mechanical, Electrical & Plumbing, Master planning layout of Fuel Pipeline & Gas lines, Production of As-built Plans, Shop Drawings & Detailing, Quantity Estimates.

Role: Sr Civil Structural Designer

Producing Structural Design Drawings. Supporting Managers in Printing Document and drawing stuff. Preparing Structural Bim Models. Apply QA/QC on project Standard for drawings and Bim Models. Coordination with other design disciplines to ensure the design alignment. Supervise the installation in site for structural & Architectural. Prepare request for all materials and equipment needed. Estimates manpower, materials, equipment to be used in site. Inspect construction materials and method as to conformity with plans and specifications. Prepare & coordinate infrastructure design drawings using Cad & overlaying analysis with respect with the consolidated master plan of the whole area. Responsible for preparation of complete bill of materials for all discipline drawings. Responsible for checking of CADD drawings for projects. Responsible for reviews of as-built drawings and assists with collection of design information required by construction and procurement. Responsible for drawing search, data gathering from library and from site. Supports construction and procurement with preparation of drawings and material take-offs. JVG JR 2

(Dubai, UAE) (Finished

Project.)

Dec. 2004 – Feb. 2006

ARENCO Architectural &

Engineering Consultant

Structural Cad Detailer

(Dubai, UAE)

Sept. 2004 – Nov. 2004

Maunsell Consultancy Ltd.

Cad Designer

(Dubai, UAE) (Contract Project

Basis)

May. 2002 – Feb. 2004

ALMARAI Company Limited

Cad Engineer

(Riyadh, KSA)

Oct. 2000 – Oct. 2001

Maunsell Sharma & Zakaria

Sdn. Bhd Consulting Engineers

Structural Cad Detailer

(Malaysia) (Finished Project)

July. 2000 – Oct. 2000

Cad Engineer

COWI-NACO Airport

Consultants

(Manila, Phils.)

Apr. 1999 – July 2000

Structural Detailer

UICI –Urban Integrated

Consultant Inc

(Manila, Phils.)

May 1998 – June 1998

Cad Designer

Louis Berger Int’l Inc.

(Manila, Phils.) (Contract

Project Basis)

Dec. 1995 – Dec. 1997

Cad Operator / Designer

ABV Rock Group KB

(Riyadh, KSA)

Nov. 1994 – Nov. 1995

Cad Operator / Detailer

Angel Lazaro & Associates

Consulting Engineer’s &

Arch’s

(Manila, Phils.)

The Guam Power Authority (GPA), in partnership with Korea Power Company Korea East West Power (KEPCO KEWP), is proposing to construct a new 198 MW combined cycle combustion turbine power plant (CCPP), & Fuel Pipelines Guam, USA

Involvement Period: Apr. 2021- Jan. 2023

Client: [ Federal Government]

Est. Project Value: [$950 million]

The development will be located in the area known as Ukudu, in the municipality of Dededo. GPA has previously received approval from the Guam Consolidated Commission on Utilities (CCU), Guam Public Utilities Commission

(GPUC), and the Guam Legislature to purchase the land and construct the new 198 MW CCPP on private land

comprising 59.2 acres. This parcel has been purchased by GPA, and the Guam Legislature has rezoned the parcel to M1 (Light Industrial) zoning to allow power plant development. The new

198 MW CCPP project is located on a 59.2 acre parcel. The power plant utilizes 25 acres, and an additional 15 acres will be used as a laydown area during construction. In addition, approximately 15 acres to the northwest will be obtained by KEPCO/KEWP to be utilized as an additional laydown area outside of the 59.2 acre parcel subject to approval of the landowner. Access to the power plant site will be from Route 3 to the east along a reserved easement leased to GPA

Role: Project Engineer/ Sr Civil Structural Designer Preparing cost estimate and sending out material request for quotations to Suppliers and vendors. Prepared material submittals and shop drawings Supervise a team of supervisors and foreman in project implementation according to contract requirements, established and maintain safe working relationship with onsite workers. Performed field work and technical guidelines. Performed field support activities, where assigned, for engineering support during construction. Undertaking technical discussion including site investigations for the assigned project. Ensuring projects run smoothly and structures are completed within budget and on time. Hardened Fuel Systems Maintenance Hanger (Andersen Air Force Base, Guam USA) (FY PROJ. P-3027/AJJY 133027 Par Tanker Maintenance Hanger) & (Fy14 MCAF PROJ. P-3010/AJJY 123010 Par Fuel System Maintenance Hanger- Strike), Fuel Pipelines Guam, USA

Involvement Period: Oct. 2018- Apr. 2021

Client: [ Federal Government]

Est. Project Value: [$220 million]

The Construction of a two hardened fuel system maintenance hangar at Andersen Air Force Base, Guam, USA, Project Cost is $240 million, DOD- sponsored. The facility will house multiple aircraft types and provide repairs, functionality checks, and inspection of aircraft fuel systems, fuel tanks, and related components in support of the Guam Strike mission. Bomb Proof and state of the art sophisticated Classified facilities. It is considered the two largest hangers in the world.

Role: Civil Engineer

Estimating Concrete volume for the area to be poured on the project. Doing BOQ for rebar to be used on the project. Implementing, Supervising remediation & rectification on site as per NAVFAC comment. Constant coordination with other discipline as project on completion stage. Checking all Structural works on site is as per ACI code & Standard. Equipment monitoring as per everyday activities. Producing Civil / Structural shop Drawings including bar bending & cutting list for the assigned Par Tanker hanger Project. Assist project manager in developing estimates, schedules, material lists etc. Working under minimum supervision and achieve deadlines for all tasks. Undertaking CAD checking and quality control in accordance with CAD standards & any JVG JR 3

Academic Qualifications

Bachelor of Science in Civil

Engineering, Technological

Institute of the Philippines,

1994

Professional Memberships

Associate Registered Member

(Philippine Institute of Civil

Engineers) -PICE

Professional Trainings

40 -Hours on Construction

Safety Awareness Training (as

per EM 385-1-1) (OSHA) (April

2020)

Civil 3d 2018, Microcadd,

Manila, Philippines (March-

June 2018)

Revit Structure 2017,

Microcadd, Manila,

Philippines (Nov-Dec 2017)

Navisworks Manage,

Microcadd, Manila,

Philippines (Nov-Dec 2017)

Revit Structure 2013, Al Areef

Computer Institute, Abu

Dhabi, UAE

Microstation J, CAD Vision

Engineering Technologist,

C.M. Recto Ave.,

Corner, Morayta Manila,

Philippines, 2004

3D Studio Max, CAD Vision

Engineering Technologist,

C.M. Recto Ave., Corner,

Morayta Manila, Philippines,

2004.

AutoCAD 2000-3D Wireframe,

3D Solid Modelling, Colour

Rendering, Microcadd

Technologies, Cubao, Quezon

City, Philippines, 2000

specific project requirements. Perform field work and technical guidelines. Preparation and deliver the requested drawings in time as agreed. Ensure compatibility between plan and structural elements on the site. Performed field support activities, where assigned, for engineering support during construction. Making RFI & transmittal in order that the work job will be approved. Responsible for reviews of Shop drawings and assists with collection of design information required by construction and procurement. Interface meeting with the joint venture company in resolving the issue regarding the technical submission. Ensuring projects run smoothly and structures are completed within budget and on time. Undertaking technical discussion including site investigations for the assigned project. Managing and supervising drafting and resources for successful delivery. Resolving shop design drawings and development problems.

Car Parking Building 5 floors Located in Kingdom of Saudi Arabia Involvement Period: Feb 2018 – Jun. 2018

Client: [Saudi Government]

Est. Project Value: [[$325 million]

Role: Senior Bim Modeller

Carrying out technical Revit operations in accordance with the company systems. Preparing of Structural General Arrangement, Post Tension Concrete, Reinforced Concrete and Structural Steelwork drawings. Working under minimum supervision and achieve deadlines for all tasks. Working in accordance with Arcadis CAD/Revit standards and any specific project Requirements. Working within a team and produced high quality worked and meet tight deadlines and the ability to work in a systematic and methodical manner. Leading big projects including resourcing, liaising with lead office and producing Project Progress reports for the lead Office. Managing and supervising drafting and resources for successful delivery on all projects. Undertaking CAD checking and quality control in accordance with Arcadi’s cad standards and any specific project requirements. Providing direction, supervision and Revit training if required.

Investigation and retrofit structural design of 4-storey Odiongan Commercial Centre, Odiongan Romblon. Structural Retrofit of 8-storey bldg., Capitol Hills, Quezon City. Proposed 25-storey Office bldg., Quezon City. Proposed 18- storey bldg., Diliman Quezon City. 12k sq.m Proposed Warehouse Complex Batangas, Philippines. Structural Design of various 2-storey / 3-storey,Oil Pipelines, Residential Houses. Structural Design of various 4-6 mixed commercial Office, Residential Bldg.,

Involvement Period: Sept. 2015 – Sept. 2017

Client: [Private Ownership]

Est. Project Value: [[Php250 million]

Role: Senior Civil Structural Cad Lead Designer

Performing civil and structural detailed design drawings duties on assigned projects. Assist project manager in developing estimates, schedules, material lists, and design concepts, design drawings and other project documentation per client and corporate guidelines. Develop, Maintain & Updating As-built master plan for the whole Project. Perform field work and technical research. Maintain project files and documentation. Certify accuracy and completeness of all deliverable products and services in assigned areas of responsibility. Maintain budget and schedule. Performing field related work collecting design information and verifying tie- INS, function and clearances. Performing temporary field support activities, where assigned, for engineering support during construction. Assisting engineers with cost and material estimated and preliminary design studies. Checking the accuracy and quality of drawings. Preparing structural and civil construction plans and specifications. JVG JR 4

AutoCAD Rel. 14 - 3D

Wireframe, 3D Solid

Modelling, Microcadd

Technologies, Cubao, Quezon

City, Philippines, 1999

Visual Basic Programming

V.5.0, Interface Computer

College, Recto, Manila,

Philippines, 1999

Microstation '95

Fundamental, ABV Rock

Group K.B, Riyadh, Kingdom of

Saudi Arabia,1997

Professional Skills

Designing, Detailing &

Drafting Skills –

Proficient with a wide range

of design and engineering

software including AutoCAD

2023, Revit Structure

2021,etabs (basic knowledge),

MicroStation J, Navisworks,

(knowledge in Arc GIS), Civil

3d & 3d solid modelling.

International standards

included AISC, ACI, BS, ASCE,

and UBC. Utilized ACI-318,

UBC and ASCE standards for

concrete, ASCE standards for

steel structures.

Excellent in attention to

detail, outstanding job

performance, leadership by

example, ability to prioritize

multiple projects, dedication

to quality, and completion of

all projects within budgets

and deadlines.

Estimate, Analyse & doing bar

bending schedules, Rebar

Detailing, MTO

Procedure Development &

Optimization

New Technology

Development/Implementatio

n product development

additionally, responsible for checking shop drawings to be modified for expansion.

Qatar Energy formerly Qatar Petroleum (QP), is a state owned petroleum company of Qatar. The company operates all oil and gas activities in Qatar, including exploration, production, refining, transport, and storage. The President & CEO is Saad Sherida al-Kaabi, Minister of State for Energy Affairs. The company's operations are directly linked with state planning agencies, regulatory authorities, and policy making bodies. Together, revenues from oil and natural gas amount to 60% of the country's GDP. As of 2018 it was the third largest oil company in the world by oil and gas reserves. In 2020, the company had total revenues of US$21bn, a net income of US$7.9bn, and total assets of US$116bn. In 2021, Qatar Energy was the fifth largest gas company in the world.

Involvement Period: Nov. 2014 – June. 2015

Client: [State Owned]

Est. Project Value: [[$116 billion]

Role: Designer

Review & checking of technical submission of the proposed non-crossing, crossing matrix & routing of end users (ORYX, DOLPHIN ENERGY, QATARGAS, Etc.,) & contractor if the proposed routing has major impact & interference on the existing utilities such as product pipelines, power & telecom cable, common cooling water pipelines etc,)

Interface meeting with the end users & contractor in resolving the issue regarding the technical submission coordinate work with other discipline such as mechanical, architectural, structural, electrical & landscaping. Answering queries & transmittal in order that the work job will be approved. Prepare & coordinate infrastructure design drawings using Cad & overlaying analysis with respect with the consolidated master plan of the whole area of Ras Laffan. Ensure that the technical submission of end users & contractors are per QP Standard. Review design brief with Discipline Engineers and where necessary seek further clarification before proceeding with task. Ensure designs accommodate the space requirements for service and plant where appropriate arranges zoning of services. Ensure compatibility between plan / piping system and structural elements. Consolidate the planned and approved drawings of all RLC areas and corridors for ready reference and decision purposes. Discuss with project engineers and get their input for detail designs drawings. Preparation and deliver the requested drawings in time as agreed. Ensure designs are feasible, practical and cost effective. Incorporate changes as necessary or directed and identify problem areas arising there from the suggest solutions. Responsible for preparing and review of calculations. Develop, Maintain & Updating As-built Master plan for the Engineering Record. Responsible for preparation of complete bill of materials for all discipline drawings. Responsible for checking of CADD drawings for projects. Responsible for reviews of as-built drawings and assists with collection of design information required by construction and procurement. Responsible for drawing search, data gathering from library and from site. Supports construction and procurement with preparation of drawings and material take-offs Emirates Flight Catering Expansion Projects- on going, Abu Dhabi Future Schools Program Phase 4 Model 2, Abu Dhabi & Al Ain, UAE Abu Dhabi Future Schools Program Phase 3, Abu Dhabi & Al Ain, UAE, Dubai, UAE, Grand Mosque Al Ain, Oil Pipelines Al Ruwais, UAE Al Sharq Tower I & II, Al Reem Island, Abu Dhabi, UAE, Abu Dhabi Islamic Bank HQ, Abu Dhabi, UAE Involvement Period: July 2008 – Nov. 2014

Client: [Abu Dhabi Government]

Est. Project Value: [[$450 million]

JVG JR 5

EKFC) New structures-B+G+4 including parking with steel bridges connecting the existing bldg. & refurbish bldg..-extension with agv corridor-Mixed used,(ADEC schools phase 4) 7 schools in 7 different areas of UAE-G+2 classrooms, auditorium & swimming pool amenities, (ADEC schools phase 3) 7 schools in 7 different areas of UAE-G+2 classrooms, auditoriums & swimming pool amenities, Grand Mosque- steel frame with huge & long span steel roof trusses, car parking areas, Al Sharq Tower I & II (B+G+ 36 & B+G+37-stories both with basement car park-twin tower bldg.-hotel & luxury apartment. Dar al Dhabi real estate-client.

Role: Senior Structural Cad Designer

Assisting junior technician, helping structural engineers in detailing works. Provided design drawings detailed support. Successfully completing all projects on-time and under budget. Maintained the quality of work to ensure strict adherence to Municipality Regulations. Selected as Lead Cad Designer for al reem island project, EKFC, ADEC phase 3 & 4, Detailed designed drawings including slab and wall openings, trenches, basements, rafts, overhead cranes, and various embedment’s. Detailing of hollow core for large spans & steel structures, including towers connecting bridge, Issued complete tender & shop drawings for all designs. Observing strict ACI-318, UBC and ASCE standards for concrete, ASCE standards for steel structures. Utilized AutoCAD 2011, and related software. Supervised the work of cad technician, guided them on structural detailing, and provided support through design.

(LOGCAP III)-Logistic Civil Augmentation Program, USA Involvement Period: Sept. - Nov. 2007

Client: [Federal Government]

Est. Project Value: [$450 million]

US Military Facilities

Role: Designer

Preparatory program to work in Kandahar, Afghanistan, I Was hired under log cap III by KBR & will be assigned in Kandahar, but unfortunately was sent back home by KBR because of Philippine government ban of Filipinos in Afghanistan. Stayed in Houston, Texas for 3 months & undergone an extensive training in structural detailing, safety precautions, nuclear & biological attack, and rigorous medical & physical check-up.

Canal Point, Emirates Bank Head Quarters (Robo Parking), Palm Jumeirah, F1 Theme park motor city etc., UAE

Involvement Period: March 2006 – Sept. 2007

Client: [NBAD]

Est. Project Value: [$550 million]

Canal point- high rise hotel & wellness area with car parking & basement

(B+G+43), Emirates bank Head Quarters (Robo parking area bldg. operated by computerized & Mechanical) Palm Jumeirah-10 villas (G+1+R), F1 Theme park motor city.

Role: Structural Cad Designer

Served as Lead Structural Cad Designer for the project Canal Point, Emirates Bank Head Quarters (Robo Parking), Palm Jumeirah, F1 Theme park motor city etc. Drawn & submitted the detailed design drawings of Shoring details, Bored pile layout, hotel & office podium canal point, overall layout of canal point schematic & detailed design drawings. Submitted the preliminary design drawings of palm Jumeirah, borehole layout for F1 Theme Park layout-working progress for the whole master layout. Responsible for providing technical support, assisting with the tender stage and preliminary solution proposals, creating detailed project drawings, troubleshooting problems, and solving various construction difficulties.

JVG JR 6

1800, 1808, 1798, 1818, 1728, 1745, 1777 (HIGH RISE TOWER), GAS PIPELINES UAE

Involvement Period: Dec. 2004 – Feb. 2006

Client: [EMAAR]

Est. Project Value: [$635 million]

1800- 2B+G+7 Residential bldg., at Mankhool Dubai, UAE 1808 Jumeirah islands 3 podium + 2b +10 & Dubai, UAE, 1798 G+4 new h.q. of federal national council Dubai, UAE, 1818 B+G+58 commercial & residential bldg. Abu Dhabi, UAE, 1728 G+5 national bank of al Gaiwain, UAE, 1745 Aam tower at Dubai media city, UAE, 1777Jumeirah beach residence project etc. Dubai, UAE. (HIGH RISE TOWER)

Role: Structural Cad Detailer

Prepared detailed design drawings of high-rise buildings including reinforcement layout, bar bending schedules, beams, slabs, shear walls, columns, bored pile layout, sections etc. Additionally, responsible for checking shop drawings for towers, design detailed drawings of tower foundations, and structural drawings design for RC buildings to be modified for expansion. Dubai Festival City, Dubai international financial Centre, Mall of the Emirates, Sharjah Free Zone etc., UAE

Involvement Period: Sept.-Nov. 2004

Client: [DFC]

Est. Project Value: [850 million dirhams]

Infrastructure of storm, water & drainage system, roads & highway etc. Role: Cad Designer

Responsible for the drawing preparations of road profile, sections, layout, infrastructure drawings such as storm & water, drainage system, etc., as directed by the regional director of Maunsell, assigned to coordinate a variety of engineering and design-build functions.

Almarai Super farms 1-6, Almarai depot in UAE & GCC, Saudi Arabia Involvement Period: May 2002- Feb. 2004

Client: [Owner]

Est. Project Value: [750 Million Saudi Riyal]

Super Farms Expansion Depots & flake maize plant. Almarai has been significant contributor to the evolution of industry and commerce in the Arabian Peninsula, particularly in the development of agriculture and dairy production. The farming division has the most equipt integrated & state of the art dairy & milking parlour in the whole Middle East. Its processing plants are one of the largest and most modern plants of its type in the world. Almarai Company limited continues to be market led organization and places significant emphasis on brand building and product development.

Role: Cad Engineer

Prepared detailed of as-built design drawings, Site layout plans of Almarai depots in the whole middle east, architectural, structural & mechanical layout. Perform other works as directed by the construction project manager. Conducted & evaluated present site condition for the as-built layout of all Super farms 1-6, Expansion Depots & flake maize plant. Maintained the quality of work to ensure strict adherence to company regulations. Jabatan Kerja Raya (JKR) Bridges, Sarawak, Malaysia MRR2 (Middle Ring Road 2), Kepong, Malaysia New Pantai Highway, Malaysia Kuantan Port, Malaysia Kerling & Guru Nanak Bridges, Malaysia KL Monorail – Titiwangsa, Malaysia Penang Bridges – Penang, Malaysia. Involvement Period: Oct. 2000-Oct. 2001

Client: [Malaysian Government]

Est. Project Value: [450 million ringgit]

JVG JR 7

Pre-stress & steel Bridges, highways, Monorail & roads. Role: Structural Cad Detailer

Prepared detailed design drawings of the pre-stressed concrete bridges structural lay-out and plans, pre-stressed tendon cables, pile cap layout including bar arrangement, RC details of blister blocks, superstructure substructure bar layout, motorcycle underpass layout etc. Perform other works as directed by the department head. Responsible for providing technical support, assisting with the tender stage and preliminary solution proposals, creating project detailed drawings.

Airports domestics & International, Philippines

Involvement Period: July - Oct. 2000

Client: [DOTR]

Est. Project Value: [PhP 950 million]

Rehabilitation of Domestic & international Airports in the whole Philippines particularly in Mindanao.

Role: Cad Engineer

Prepared CAD works of the civil architectural, mechanical, structural, and electric lay-outs and plans and other related Engineering drawings to be required under the project. Ensures that the drawings prepared are of sound engineering standards perform other works as may be directed by his immediate supervisor and the COWI-NACO team leader. Earthquake Reconstruction Project (ERP) of Bridges, Philippines Involvement Period: April 1999- July 2000

Client: [DPWH]

Est. Project Value: [PhP900 million]

RCDG & steel Bridges, highways & roads

Role: Structural Detailer

Prepared detailed design drawings for replacement condition of each bridge such as approach slab, slab strengthening, lengthening of coping, bored piles etc. Produced PSCG and RCDG drawing scheme, including plan, elevation and sections. Provided bar scheduling for different span of bridges. Philippine Centennial Freedom Ring Amphitheatre & Exhibition Center. Expo Filipino, Angeles City, Philippines

Involvement Period: May - June 1998

Client: [Clark Investment Authority]

Est. Project Value: [PhP850 million]

The Freedom Ring, the Centre piece of the Expo Pilipino site, is a dynamic architectural statement designed to meet the expectations and aspirations of the Filipino people. The Ring is designed to provide a forum for the Philippine people to showcase their heritage to the world, and to provide a forum for the Philippine people to showcase their heritage to the world, and to highlight their achievements and unique experiences in the area of trade, culture and arts, environment, education, and international trade.

Role: Cad Designer

Prepared the structural drawings of Bird Air Structure and tensioned membrane structures covers Amphitheatre /stage complex.

SSSP-Saudi strategic storage program, Saudi Arabia Involvement Period: Dec. 1995-Dec.1997

Client: [Saudi Government]

Est. Project Value: [SAR 2 Billion Saudi Riyal]

Underground Tunnel-Hydrocarbon storage Facilities, Power Generation Area, Cavern Area, Service Area & Lubrication Oil Area.

Role: Cad Operator / Designer

JVG JR 8

Submitted the detailed design drawings of steel fabrication and shop drawings of (Cavern Area, Power Generation Area, Service Area, Lub-Oil Area) provided with the material take- off sheets, bar bending of concrete reinforcement, isometric piping, revised the “as-built” drawings of the different project sites. Assisted with the work schedules. Detailed drawings of steel structures including material take-off and material requisition. Produced and prepared fabrication and shop drawings plan elevation and sections. Revising drawing to

"as built" status. Administrate drawing lists and numbers. Updating work schedules, performed work in accordance with project design procedure. Finishing schedules bar bending etc.

Bridge Retrofit Program (BRP), Philippines

Involvement Period: Nov. 1994-Nov. 1995

Client: [DPWH]

Est. Project Value: [[PhP675 million]

Bridge Retrofit Program (BRP). A supplemental project to the Earthquake Reconstruction Program (ERP), Packages A-H total of 162 bridges undertaken by the Department of Public Works and Highways (DPWH) of the Republic of the Philippines, financed by the World Bank Loan No. 3263-PH and ADB Loan No. 1053-PHI (SF).

Role: Cad Operator / Detailer

Responsible for the preparations and drawings such as plan, elevation and sections. Retrofit work schedules, revising drawings to "as-built" status. Detailing of reinforcement for the bridge structures. Prepared, assisted and drawn the bridge packages A-C. Detailed the design drawings for retrofitting condition of each bridge (RCDG, Steel) based on the report involving shear keys, slab strengthening, lengthening of coping, replacement of approach slab, repair of wing wall/back wall, putting steel jacket on column. Submitted the different span of bridge scheme such as flat slab, pre-stress, steel or reinforced concrete design girder and provided bar scheduling for different span of girder. TRAININGS / SEMINARS:

OSHA (40 HRS.)

CONSTRUCTION SAFETY

AWARENESS TRAINING

10-APR-

2020

CIVIL 3D

CIVIL 3D-GRADING, CUT & FILL

VOLUME & PIPING NETWORK,

ROAD ALIGNMENT & PROFILE

MAR-JUN

2018

REVIT STRUCTURE

2017

REVIT STRUCTURE 2017-

SUBSTRUCTURE &

SUPERSTRUCTURE MODELLING

BUILDINGS

NOV-DEC

2017

NAVISWORKS

MANAGE

NAVISWORKS MANAGE 2017

NOV-DEC

2017

REVIT STRUCTURE

2013

MODELLING HIGH RISE BUILDINGS APR-2013

MICROSTATION J

MICROSTATION J-EDITING,

PLOTTING & DETAILING

MAR 2004

3D STUDIO MAX

3D STUDIO MAX-MODELLING

HOUSE

MAR

Contact this candidate