Electrical Engineer Business Development

Professional Resume’

J.P. Javier

PROFESSIONAL RESUME’

JASON P. JAVIER

Professional Electrical Engineer / PRC #: 2390

Philippines Address:

Unit 3411, SM Berkeley Residences

Katipunan Avenue, Quezon City 1105

Philippines

Mobile #: +63-917-***-**** / 995-***-****

E-mail Address: ************@*****.***

Alt. E-mail Address: ************@*****.***

EXPERIENCE SUMMARY:

More than thirty eight (38) years responsible engineering experience (over 17+ years experienced in the oil and gas industry) in the preparation of electrical design, cost estimate and construction of industrial (oil

& gas - both onshore & offshore structures, petrochemical, power plants and marine environment) infrastructure, commercial, institutional buildings and facilities, involving conceptual design, front-end engineering (FEED), detailed design, design supervision, bid package preparation, MTO, construction supervision, project management, and business development. Deliverables produced during the entire oil and gas industry experience are: Calculations and Studies

(Generator Sizing, Cable Sizing, Low Voltage and Medium Voltage Equipment Sizing, UPS Sizing, Battery Charger Sizing, Cathodic Protection System, Solar Power System, Grounding Calculation, Lighting Calculation & Power System Studies), Electrical Design Philosophy, Single Line Diagram, Interconnection Diagram, Block Diagram, Schematic Diagram for Motors (DOL, VFD and soft starters), Electrical Load List, Electrical Equipment List, Tie-in List, Cable Schedule, Cable Drum Schedule, Panelboard Schedule, Typical Installation Details (Power, Lighting, Cable Tray & Grounding), Hazardous Area Classification Drawings, Layouts (Cable Tray, Power, Grounding, Lighting, Cathodic Protection & Lightning Protection), Technical Specifications, Data Sheets, Weight Control Report, Site Visit Plan, Site Visit Report, Material Take-Off, Material Requisition, Technical Bid Evaluation, various Work Packages, Energy Saving Study, Electrical Power System Study, Arc Flash Analysis, Electrical Safety Audit, Electrical Value Engineering and Electrical Integrity & Reliability Study.

Other tasks done are bid package preparation, procurement support, attend FAT (Factory Acceptance Tests), site visit/survey, CTR (Cost, Time & Resources) preparation, MDR (Master Deliverable Register) preparation, engineering support during construction, project management and weekly progress reports. Conversant with international standards such as NEMA, NFPA, NACE, ANSI, API, IEEE, IEC, DNV GL, British Standards, Client specific standards such as Shell DEPs, Exxon Mobil’s Design Manual, Chevron’s Design Guide and others.

Knowledgeable in MS Word, Ms Excel, MS Power Point, AutoCAD, Microstation, PDS, ETAP PowerStation and SKM Power Tools for Windows.

Founder and Co-Owner of Javier & Balmes Engineering Solutions, Inc. PROFESSIONAL SPECIFIC EXPERIENCE:

TECHNICAL SERVICES & SUPPORT DEPT. MANAGER

ELECTRICAL EQUIPMENT & SYSTEM INTEGRATION, INC.

Project 8, Quezon City

February 2021 ~ April 2024

Manages the day to day activities and workload of the department. Acts as Consulting Electrical Engineer on any electrical projects involving electrical construction, installation and commissioning, preventive and corrective maintenance. Professional Resume’

J.P. Javier

Provide technical support services during construction and implementation of electrical construction projects.

Responsible for the review and evaluation of work methods, work assignments, and staf fing of the Technical Services & Support Department and initiates actions that will reduce costs and/or increase productivity.

FREELANCE PROFESSIONAL ELECTRICAL ENGINEER PRACTITIONER Katipunan Ave., Quezon City

November 2019 ~ January 2021

Check, annotate, sign and seal electrical plans. Prepares electrical design for commercial and residential Clients. Freelance Business Development Partner for Energy Service Companies and Renewable Energy Companies.

Acts as project manager for the contracted electrical projects.

SENIOR ELECTRICAL ENGINEER (Short term, project based sub-contractor for 2-months only.) CHIYODA PHILIPPINES CORP.

Shaw Blvd., Mandaluyong City

August 2019 ~ October 2019

Project Undertaken: Gulf

East JV Olefins Facility

Corpus Christi, Texas, USA

Responsible for preparing Detail Design deliverables for Lighting and Small Power System. 3D model is used as reference for extracting 2D background drawings for the said system. Responsible for checking drawings, lighting diagram and documents specifically for lighting and small power system.

SENIOR ELECTRICAL ENGINEER

FLUOR DANIEL INC., PHILS.

Alabang, Muntinlupa City

January 2018 ~ March 2019

Project Undertaken:

PENGUINS REDEVELOPMENT PROJECT (PENGUINS FPSO)

SHELL INT’L PETROLEUM CO. LIMITED

North Sea, UK

Responsible for the checking of drawings and documents, preparation of requisition specifications, calculations, material take off, Vendor coordination, preparation of Technical Bid Evaluation, Vendor data review, preparation of final single line diagram, load calculation, panelboard schedule, cable schedule, squad check and coordination with other disciplines. Responsible Engineer for LV Switchgear package and Navigational Aids package ensuring that Vendor offer is in accordance with project requirements. Ensures that all deliverables produced complies with IEC standards, Shell DEPs and DNV GL offshore standards. Professional Resume’

J.P. Javier

SENIOR ELECTRICAL ENGINEER

AC ONG CONSULTING, INC.

Makati City, Metro Manila

August 2017 ~ December 2017

Responsible as electrical reviewer/checker of electrical deliverables for all phases of design. Provide technical guidance and knowledge to junior electrical design engineers. Projects handled are high end residential, commercial, buildings and infrastructures. Provide technical guidance and knowledge to junior electrical design engineers.

FREELANCE PROFESSIONAL ELECTRICAL ENGINEER PRACTITIONER Katipunan Ave., Quezon City

December 2016 ~ July 2017

Check, annotate, sign and seal electrical plans. Prepares electrical design for commercial and residential Clients.

Acts as project manager for the contracted electrical projects.

LEAD ELECTRICAL ENGINEER

AMEC FOSTER WHEELER OPERATIONS GHANA LIMITED

Accra, Ghana

September 2014 ~ November 2016

Project Undertaken:

MV21 KNK FPSO – BROWNFIELD & GREENFIELD MODIFICATION WORKS TULLOW OIL GHANA LIMITED

Offshore, Ghana

ONSHORE NATURAL GAS TRANSMISSION PIPELINE (NGTP) PROJECT GHANA GAS Western Region to Greater Accra Region, Ghana

Functions as Lead Electrical Engineer for the execution of brownfield and greenfield modifications works of Tullow Oil Ghana Limited and engineering/design for NGTP Project of Ghana Gas. Responsible for preparing Management of Change (MOC), Scope of Requirements (SOR), Work Order

(WO), estimate, project schedules, progress reporting, Cost Time Reporting (CTR) preparation, Work Package preparation, engineering and calculation works, Energy Saving Study, Electrical Power System Study, Arc Flash Analysis, Electrical Safety Audit, Electrical Value Engineering and Electrical Integrity & Reliability Study, checking of deliverables and client interface. Prepares and review MTO and issue requisition for all the materials required under the scope of work. Evaluate quotations through technical queries and clarifications issued to vendors. Analyze and make independent recommendations regarding solutions to problems with varying complexity and/or project objectives and guidelines. Resolve interface problem with other disciplines. Support AMECFW Aberdeen counterpart. Attend kick-off meetings. Conducts electrical mentoring/clinic to local Ghanaian engineers.

SENIOR ELECTRICAL ENGINEER

DUBAI SUPPLY AUTHORITY (DUSUP)

Margham Field, Dubai

March 2014 ~ August 2014

Project Undertaken:

MARGHAM CAPACITY INCREASE PROJECT

Margham Field, Dubai

Professional Resume’

J.P. Javier

Contracted by DUSUP as Senior Electrical Engineer (Owner’s Representative) responsible for preparing Invitation to Tender, Technical Bid Evaluation, review of Technical Specifications of electrical equipment, checking of electrical deliverables submitted by Detailed Engineering Contractor such as SLDs, calculations, load list, schedules, layouts (power, lighting, cable tray, equipment & grounding), installation details, hazardous area classification drawings, data sheets, tie-in list, material requisitions, and MTO. Prepared electrical construction work package.

Ensures that all deliverables are correct and complies with project design basis and DUSUP standards & practice. Resolve interface problem with other disciplines.

BUSINESS DEVELOPMENT EXECUTIVE

DELTAAFRIK ENGINEERING LIMITED (a WorleyParsons company) Victoria Island, Lagos, Nigeria

September 2009 ~ February 2014

Projects Undertaken:

MOBIL PRODUCING NIGERIA LIMITED

Onshore/Offshore, Nigeria Exxon-East Area NGL II PROJECTS:

- NGL Extraction Platform

- 200km NGL Pipeline

- Expansion of Bonny River Terminal

Functions as Business Development Executive responsible for coordinating with Mobil Producing Nigeria Limited to secure more projects for DeltaAfrik Engineering Limited. Prepares final bid package deliverables, coordinate with engineering estimating team, project execution team and VP for Operations ensuring that the final bid price for all phases of EPCM (engineering, procurement and construction management) execution had been considered. Presides kick-off meeting to handover awarded projects to the project execution team. PRINCIPAL ELECTRICAL ENGINEER

July 2007 ~ August 2009

Projects Undertaken:

MOBIL PRODUCING NIGERIA LIMITED Onshore/Offshore,

Nigeria

MAJOR INTEGRITY PROJECTS (MIPS)/ EPCM-1 PROJECTS:

- EIU Fields Redevelopment Project

- Critical Crude Pipeline Upgrade Project

- Utue FWS Platform Conversion Project

- Onshore/Offshore Security Upgrade Project

- Offshore Satellite Fields Dev’t Project Phase 2

- QIT Produced Water Discharge Project

- QIT 11 kV Emergency Trunking Project

Exxon-East Area NGL II PROJECTS:

- NGL Extraction Platform

- 200km NGL Pipeline

- Expansion of Bonny River Terminal

Functions as Principal Electrical Engineer responsible for the front-end and detailed design & engineering works of Major Integrity Projects (Mobil Producing Nigeria Unlimited, Nigeria) and Exxon East Area NGL II Projects. Responsible for the SKM Power System Studies (PTW v6.0.3.2) of EIU (Etim, Inim, Utue) Complex as part of the overall electrical power system for the Riser, LQ, Production and Wellhead Platforms.

Engineering and design calculation works includes sizing of power generating sets (gas turbine, gas engine and diesel engine), solar PV sizing, grounding, cathodic protection of jackets and pipelines, cable sizing, cable tray sizing, lighting, multi cable transit, cable schedule, LV and MV electrical equipment Professional Resume’

J.P. Javier

layout/specifications, power and control layout, motor schematics, interconnection diagram, termination drawings, and Weight Control Report (WCR).

Prepares technical specification, data sheets, and design philosophy. Responsible for the generation of IFC (Issued For Construction) Drawings to be used by the Construction Team in implementing electrical construction works at site. Responsible for various scheduling, man- hours, cost reporting and project execution plans. Attend project engineering meetings.

Prepares and review MTO and issue requisition for all the materials required under the scope of work. Evaluate quotations through technical queries and clarifications issued to vendors. Resolve interface problem with other disciplines. Engineering support during construction at site. Acts as deputy lead when the lead electrical engineer is on R&R. Conducts electrical mentoring/clinic to local Nigerian engineers.

LEAD ELECTRICAL ENGINEER

ATLAS INT’L ENGINEERING SERVICES NIGERIA LTD.

Victoria Island, Lagos, Nigeria July

2006 ~ July 2007

Projects Undertaken:

MEREN WATER INJECTION FACILITIES PHASE 2 REVAMP

CHEVRON NIGERIA LIMITED

North Offshore, Escravos, Nigeria

WARRI CLINIC UPS SYSTEM UPGRADE

CHEVRON NIGERIA LIMITED Warri,

Nigeria

ESCRAVOS TELECOMS BLDG. POWER FEED UPGRADE

CHEVRON NIGERIA LIMITED Escravos,

Nigeria

CRASH ALARM SYSTEM AT ESCRAVOS AIRPORT

CHEVRON NIGERIA LIMITED Escravos,

Nigeria

SR-005: GENERATOR CHANGEOUT AT AKAM & EBUGHU PLATFORMS ADDAX PETROLEUM LIMITED Offshore,

Nigeria

Functions as Lead Electrical Engineer for the front-end engineering design (FEED), technical specifications development and detailed engineering packages required by clients. Responsible for the material take-offs, RFQs, technical bid evaluation, client interface required in the tender packages for various oil and gas projects of Atlas International Engineering Services Nigeria Ltd. Responsible for various scheduling, man- hours, cost reporting and project execution plans. Attend kickoff meetings.

Engineering and design calculation works includes earthing, cable sizing, cable ladder sizing, lighting, multi cable transit, cable schedule, LV and MV electrical equipment layout/specifications, power and control layout, motor schematics, interconnection diagram and termination drawings. Responsible for the generation of IFC (Issued For Construction) Drawings to be used by the Construction Team in implementing electrical construction works at site. Professional Resume’

J.P. Javier

Prepares and review MTO and issue requisition for all the materials required under the scope of work. Evaluate quotations through technical queries and clarifications issued to vendors. Engineering support (during construction) duties involving site visits, site coordination, temporary assignment to site and engineering advice during project EPC implementation. Resolve interface problem with other disciplines.

Conducts electrical mentoring/clinic to local Nigerians.

SENIOR ELECTRICAL ENGINEER

MODEC INTERNATIONAL LLC/OGS Ind.

Jurong Shipyard, Tuas Road, Singapore

October 2005 ~ June 2006

Project Undertaken:

PDET PRA-1 FSO (Floating Storage and Offloading) CAMPOS BASIN PROJECT Petrobras

- Brazil

Projects under OGS Industries PTE LTD:

QATAR GAS DEVT PROJ. OFFSHORE FACILITY

Qatar Gas, Qatar

ARTHIT FLD. DEV’T CENTRAL FACILITIES PTTEP

Thailand

Functions as Senior Electrical Engineer responsible for the front-end and detailed design & engineering works of PDET PRA-1 FSO CAMPOS BASIN Project (Petrobras, Brazil). Engineering and design calculation works includes earthing, cable sizing, cable ladder sizing, lighting, multi cable transit, cable schedule, LV and MV electrical equipment layout/specifications, power and control layout, motor schematics, interconnection diagram, termination drawings and Weight Control Report

(WCR).

Responsible for the generation of IFC (Issued For Construction) Drawings to be used by the Construction Team in implementing electrical construction works at site. Prepares and review MTO and issue requisition for all the materials required under the scope of work. Evaluate quotations through technical queries and clarifications issued to vendors.

Engineering support (during construction) duties involving site visits, site coordination, temporary assignment to site and engineering advice during project EPC implementation. Generate replies to contractor design queries.

SENIOR ELECTRICAL ENGINEER

SIME DARBY ENGINEERING SDN. BHD./AZDAMAN ENG’G SDN. BHD. Johor Bahru, Malaysia

April 2005 ~ September 2005

Project Undertaken:

BUNGA RAYA - E CO2 REMOVAL PLTFRM.

Talisman Energy Limited, Malaysia

Functions as Senior Electrical Engineer responsible for the electrical engineering works of BR-E CO2 Removal Platform (Offshore Structure) Project.

Responsible for the generation of IFC Drawings to be used by the Project Management Team (PMT) in implementing electrical construction works at site. Prepares and review MTO and issue requisition for all the materials required under the scope of work. Evaluate quotations through technical queries and clarifications. Professional Resume’

J.P. Javier

Review, approve and incorporate vendor data as part of IFC Drawing generation. Resolve at site design queries constructively and efficiently.

Coordinate with PMT for the execution and implementation of project design. Conducts field inspection for updating and revision of plans and discussion with PMT on implementation of revisions and modifications as requested by client.

Witness Factory Acceptance Testing (FAT).

SENIOR ELECTRICAL/INSTRUMENT ENGR.

WILLBROS MIDDLE EAST, INC.

Abu Dhabi, United Arab Emirates

May 2004 ~ March 2005

Projects Undertaken:

TAWEELAH RECEIVING FAC. EPC-2D

Dolphin Energy Limited, UAE

GAS DEV’T PROJECT-ONSHORE P/L

Crescent Petroleum Company Ltd., UAE

AKPO FIELD DEV’T PROJECT

Cooper Cameron Ltd., Nigeria

OML 123 SHALLOW WATER P/FORMS

Addax Petroleum Development, Nigeria

INTER REFINERIES PIPELINES PROJ.

Abu Dhabi Oil Refining Company, UAE

GAS TRANS. PIPELINE TO COASTAL PROJ.

Zueitina Oil Company, Libya

MEDGAZ 48” GZ4 PROJECT

Sonatrach, Algeria

Functions as Lead Electrical/Instrument Engineer for the front-end, technical specifications development and detailed engineering packages required by clients. Responsible for the material take-offs, RFQs, technical evaluation, client interface required in the tender packages for various oil and gas projects of Willbros Middle East Inc. Responsible for various scheduling, man- hours, cost reporting and project execution plans. Bid duties involving site visits, pre-bid and post bid coordination, material take-off from drawings, CADD works, preparation of bill of quantities, review of technical documents, engineering & calculation works and prepare analysis report.

Engineering support (during construction) duties involving site visits, site coordination, issuance of RFQ, temporary assignment to site and engineering advice during project EPC implementation. Resolve interface problem with other disciplines.

SENIOR ELECT’L DESIGN ENGR.

IMPSA CONSTRUCTION CORP. of ARGENTINA / EDISON MISSION (USA) JV Kalayaan, Laguna, Philippines

August 2002 ~ April 2004

Project Undertaken:

CALIRAYA, BOTOCAN & KALAYAAN PROJECT

Kalayaan, Laguna - Philippines

Professional Resume’

J.P. Javier

Functions as Lead Electrical Engineer responsible in the preparation of engineering and design calculations for the construction of new 300 MW Kalayaan Pumped Storage Power Plant II in Kalayaan, Laguna. Engineering and design calculation works includes grounding, cable tray, lighting, aboveground and underground power, cable schedule, LV, MV and HV electrical equipment layout/specifications, engineering studies and MTO.

Produces electrical design work and calculations in conformance to National Electrical Code (NFPA 70), Phil. Electrical Code and other international electrical standards. Provides drawing mark-ups and design layout for conversion to AutoCAD drawings. Prepares scope of work, construction specification and material take-off.

Coordinate with other disciplines in producing the project design package within the time schedule. Provides technical and project management assistance during the construction phase. Approves contractor material submittals and recommends material substitution, if required.

ELECTRICAL DESIGN ENGINEER 3

FLUOR DANIEL, INC. – PHILIPPINES

Filinvest Corporate City, Alabang City,

Philippines December 1997 ~ July 2002 Projects

Undertaken:

UNITED OLEFINS COMPLEX PROJECT

Jubail, Saudi Arabia

Jun 2002 ~ Jul 2002

HAMACA CRUDE UPGRADER PROJECT

Jose, Venezuela

Mar 2001 ~ May 2002

SHELL GOAL PROJECT

Geismar, Louisiana, USA

Sep 2000 ~ Mar 2001

IRVING OIL PROJECT- (RFCCU)

St. John, New Brunswick, Canada

Apr 1999 ~ Dec 1999

TOYO Project - (KERTIH AROMATICS PROJECT)

Kertih, Malaysia

Mar 1998 ~ Apr 1999

FD OFFICE FIT-OUT (Level 6 & 7)

Oct 1998 ~ Apr 1999 (Part Time)

ASIAN STAR PROJECT

Dec 1997 ~ Feb 1998

Functions as area engineer responsible in preparation of engineering/design calculations for oil & gas and petrochemical projects. Performs limited power system studies using ETAP software. Engineering and calculation works includes grounding, lighting, cable tray, above ground power, heat trace, motor schematics, cable schedule and MTO through GMS. Produces electrical design work and calculations in conformance to IEC, Shell standards (DEP), etc. Provide drawing mark-ups and final design layout.

Responsible for discipline squad check, vendor data evaluation, client interface, scheduling and project execution plans.

Design work includes power, lighting, grounding, electrical distribution system and others. Types of design packages include final construction drawings, conceptual design and project proposals. Professional Resume’

J.P. Javier

Produces electrical design work and calculations in conformance to National Electrical Code (NFPA 70), Phil. Electrical Code and other international electrical standards. Prepares drawing mark-ups and design layout. Prepares scope of work, construction specification and material take-off. Coordinate with other disciplines in producing the project design package within the time schedule. Provides technical and project management assistance during the construction phase. Design work includes power and lighting, fire alarm, telephone/data, and card access system. Assigned to Asian Star Project as a continuation of the electrical design efforts started for the Fluor Daniel Office Fit-out and Asian Star base building project. Provides technical and engineering support services during the construction phase.

ELECTRICAL ENGINEER

KINDEN CORPORATION (JAPAN)

Ho Chi Minh City, Vietnam August

1995 ~ September 1997

Project Undertaken:

HAI THANH-KOTOBUKI HOTEL PROJECT Hai

Thanh-Kotobuki JV, Vietnam

Responsible for the preparation of detailed design and shop drawings for the electrical systems (i.e. Lighting, Power, Telephone, MATV, CCTV, EMG Paging, FDAS, POS/PMS, Intrusion Detection System, BMS, Grounding & Lightning Protection) needed for the implementation of the 22 – storey hotel building and 18 – storey office/apartment building project. Implements and monitors the daily electrical construction management activities of the project.

Coordinate construction activities with the main and other trade contractors to facilitate smooth flow of work and thresh out solutions/remedies and recommendations needed to increase productivity of the electrical workers. Prepares cost estimates, progress schedules and engineering study for the accomplishment of the project.

Prepares as-built drawings that will form a part of the documentation necessary for the handover of the project. Assists on the final testing and commissioning procedures of the electrical power, lighting, grounding, lightning and auxiliary systems prior to hand-over.

HEAD, TECHNICAL/PROJECT SERVICES DEPT.

ELECTROBUS CONSOLIDATED, INC.

Quezon Avenue, Quezon City, Philippines

April 1994 ~ August 1995

Provide technical support services for the following product lines: medium voltage equipment, power/ distribution transformers, electrical storage batteries, lightning products, UPS, transmission line hardware and Clark Air Base Power Plant rehabilitation. Acts as Consulting Electrical Engineer on any electrical projects involving electrical construction, installation and commissioning, preventive and corrective maintenance. Prepares Program Evaluation and Review Technique/Critical Path Method (PERT/CPM) of any electrical projects to determine its forecast. Prepares detailed technical specifications for the purchase of utilization equipment per customer requirement. Conducts on-site electrical inspections and investigations of projects to determine the feasibility/ forecasting of newly installed electrical equipment, modifications, alterations, variation of existing ones, and causes of electrical failures and deficiencies. Performs electrical work relating to design, specifications, and plans of compete interior and exterior electrical construction involving lighting, power panel/switchgear, feeders, grounding system, lightning protection system, service equipment, meter banks, load distribution centers, power outlets and various forms of utilization equipment. Prepares engineering cost estimates and project monitoring for the accomplishment of any electrical projects.

Responsible for the review and evaluation of work methods, work assignments, and staffing of the Technical Services Department and initiates actions that will reduce costs and/or increase productivity. Professional Resume’

J.P. Javier

PROJECT MANAGER

SUSSEX GENERAL CONT. (PHILS.), INC.

Pasong Tamo Ext., Makati City, Philippines February 1992 ~ March1994

Project Undertaken:

METRO CEBU DEVELOPMENT PROJECT

Metro Cebu Development Administration, Cebu

Responsible for handling the Cebu Construction Project: Procurement of Traffic Management - Metro Cebu Development Project (MCDP) amounting to 21.0 Million Pesos. Administers and provide technical supervision to the construction team in order to develop and maintain improvements that will result in lower project costs and higher profitability. Prepares Scheduling Program for the Allocation of Resources (SPAR) so that availability, suitability of material and hardware to be used in the project is monitored and allocated accordingly. Performs the final testing and commissioning procedures of the SCATS Traffic Management System prior to hand-over. Check/revises as-built drawings needed for the handover of the project.

SUPERVISORY GENERAL ENGINEER

ENG’G DEPT., PUBLIC WORKS CENTER U.S. NAVAL FACILITY Subic Bay, Zambales, Philippines

October 1991 ~ February 1992

GENERAL ENGINEER

ENG’G DEPT., PUBLIC WORKS CENTER U.S. NAVAL FACILITY Subic Bay, Zambales, Philippines

April 1987 ~ October 1991

Performs professional engineering work involved in planning for shore installations and facilities including the development and preparation of long range maintenance planning and design program activities for the Facilities Support Planning (FSP) for all shore activities in the NAVPHIL area. Performs professional engineering investigations and feasibility studies, sketches and cost estimating to determine program requirements, develop long range analysis reports and recommendations for the projected construction, maintenance, and repair requirements of existing and planned facilities. Responsible for the administration, supervision, and providing technical assistance to 8 - Facility Maintenance Specialists. Assigns work and reviews work accomplishments, provides on-the-job training, initiates personnel actions, and performs other related personnel transactions. Responsible for a continuous examination and evaluation of the Maintenance Planning Program in order to initiate, develop and maintain improvements that will result in lower maintenance costs and higher operational efficiencies. This includes the establishment of specifications and standards for recurring repairs and maintenance work, the formulation of recommendation on maintenance based on analysis of field conditions, new methods, and selection of materials best suited for the specific work. Researches and gathers all available documents and information pertaining to the maintenance history and correct condition of each facility. Inspects facilities, utilities and power plants to verify and/or identify all electrical maintenance and repair deficiencies with respect to mission requirements and determine required repairs to correct deficiencies.

Performs on-site surveys of each facility to verify building components for input to the building Annual Inspection Summary (AIS). Prepares comprehensive narrative reports on building deficiencies found and determines the required repairs to correct the identified deficiencies. Reviews manuals and instructions to determine required categories for deficiencies and prepares cost estimate. Prepares fundable estimates for critical backlog and inspection estimates for non-deferrable assets using NAVFAC Estimating software. Professional Resume’

J.P. Javier

JUNIOR ELECTRICAL ENGINEER

PUBLIC UTILITIES DEPARTMENT

Engineering Compound, Olongapo City, Philippines

March 1986 ~ March 1987

Supervises the switchyard tenders in their full responsibility of the safety and efficient operation, tending, troubleshooting, modifications, variations, housekeeping and changes of the power substation ranging from routine to more complex. Interprets/analyzes the daily load curve/graph submitted by the tenders so that power scheduling of load shedding would be attain to anticipate future overloading of the 20 MVA power transformer.

Schedules the monthly duties on a rotation basis of the tenders and at the same time submit their daily time record to the Payroll Section for the appropriation of their salaries. Performs supervision on the preventive and corrective maintenance done for the efficient and reliable operation of the power substation. Investigates reported trouble spots on the existing electrical distribution system of Olongapo City and prepares appropriate action for that matter. Updates as-built plans, single line diagrams of the existing distribution system and switchgear schematic diagrams from time to time. Surveys proposed expansion of the secondary distribution system and at the same time prepare the working design, plans and estimate of the pole line materials to be used.

TRAININGS ATTENDED:

• HUET/Water Survival Training M&O Blisston Nigeria Limited

• EMS V3.0 DeltaAFrik/Worley Parsons

• Substation Basic Component Fluor Daniel, Inc. - Phils.

• Piping & Instrumentation Diagram Trng. Fluor Daniel, Inc. - Phils.

• Tech’l Seminar for Vented Batteries Exide Europe, Inc. - Phils.

• Man-hour Estimate Fluor Daniel, Inc. - Phils.

• Checker’s Training Fluor Daniel, Inc. -

Contact this candidate