Security Clearance Electronic Assembly

ROBERT A RAFAEL

(C) 619-***-****; (E) ******.*.******@*******.***

QUALIFICATIONS & CERTIFICATIONS:

•Electronic Assembly, soldering and fabrication.

•Over 20 years’ experience in Electronic Assembly, Manufacturing, and Technician.

•DOD security clearance

October 3,2022 – Present Kings Technology, Inc. San Diego, CA

Position: Network Tech

SPAWAR, 4301 Pacific Highway, San Diego CA 92110

Designing and installing well-functioning computer networks, connections and cabling

Performing troubleshooting to system failures and identify bottlenecks to ensure long term efficiency of network

Testing and configuring software and maintain and repair hardware and peripheral devices

Design and install well-functioning computer networks, connections and cabling

Perform troubleshooting to system failures and identify bottlenecks to ensure long term efficiency of network

Inspect LAN infrastructure and fix minor or major problems/bugs

Test and configure software and maintain and repair hardware and peripheral devices

Evaluate network performance and find ways of improvement

Organize and schedule upgrades and maintenance without deterring others from completing their own work

Do regular data backups to protect the organization’s information

Provide technical direction to co-workers on computer and network usage and offer comprehensive advice and instructions

September 2019 – September 2022 SAIC San Diego, CA

Position: Electronics Tech II

SPAWAR, 4301 Pacific Highway, San Diego, CA 92110

Duties include Inducting assets, disassembly, overhaul and rebuild of system and CCA module components to include testing and acceptance, cable fabrication, troubleshooting.

Maintain parts inventory IAW OM&S regulations.

Communicate status, conditions and schedules with higher level managers and team members and provide troubleshooting assistance to the In-Service Engineering Agent and US Navy on board naval platforms.

•The development of test procedures, work Responsible for keeping up to date with the principles of Assembly and Composite Manufacturing.

•Familiarity with Assembly/Final Assembly procedures and processes under general supervision, with some detailed instructions and intermittent review, and working instructions and other amplifying documentation in support of systems, modules, assemblies, and components.

•Analyze the requirements for developing the documentation, gather the technical data required to support writing the procedures and work with technical writers assigned the task of preparing the documentation.

•Provide recommendations for improvements in procedures and processes under development and rationale to support any conclusions.

July 2016 – August 2019 General Atomics Poway, CA

Position: Technician

14200 Kirkham Way, Poway, CA 92064

•In a loud manufacturing environment with a variety of epoxy agents, this position performs repetitive or standard procedures and assists in the fabrication, curing, build-up, and assembly of various types of composite materials where required information is readily available, methods and sequences have been pre-determined, and tooling is provided.

•Works to blueprints, templates, sample parts, process sheets and other authorized information.

•Essential Functions

1. Assist in the preparation of molds and forms.

•2. Mark and cut tape, woven material, honeycomb, adhesive and similar materials following templates, guides or specific dimensions and sequences

•3. Route, drill, trim, and sand to blueprint dimensions and tolerances. Vacuum bag parts for room temperature cure.

•4. Assist in the lay-up of composite materials to molds.

•5. Fit and smooth successive layers of materials as necessary to secure build-up free from wrinkles, air pockets and voids following directions and instructions.

•6. Assemble Aircraft components using structural adhesives, rivets and threaded fasteners.

•7. Prepare surface and paint composite and metal components including bodywork, contour shaping and sanding. Apply spray application of epoxy paints, urethane, and water-based epoxy coatings, using a high-volume low-pressure spray gun.

•8. Assist in the development of shop aids to facilitate fabrication, trimming and assembly as required.

•9. Check expiration dates of materials prior to use, prepare proper mixes of resins and catalysts.

•10. May monitor and verify quality in accordance with statistical process or other control procedures.

•11. Maintain records as required. Support quality process by maintaining work area in an orderly condition by returning tools, equipment, and materials to storage area.

•12. Responsible for observing all laws, regulations, and other applicable obligations wherever and whenever business is conducted on behalf of the Company.

June 2014 – 2016 MEGGITT San Diego, CA

Position: Composite Technician III

6650 Top Gun Street, San Diego, CA 92121

Please review job duties in General Atomics, both of same culture…

Aug 2013–June 2014 Northrop Grumman San Diego, CA

Position: Electronic Technician III

9356 Spectrum enter Blvd, San Diego, CA 92123

•Duties include but not limited to building cable rack, testing, and programming PC and adding top secret software for military and homeland security.

•Build and test components, sub-assemblies, and products in support of the organization needs and schedules.

•Maintenance / Preventative Maintenance and adjustment of test equipment and lab fixtures

•Troubleshoot sub-assemblies to determine cause and remedy for malfunction.

•Use moderately complex electronic test equipment. Perform electrical adjustments when testing.

•Perform calibration checks on electronic instruments.

•Load and unload assemblies into the environmental chambers

•Perform vibration testing of assemblies and provide support to upper-level technicians.

•Perform accurate data/record keeping. Work involves standard electromechanical techniques, and the use of standard hand-held tools.

•Follow shop safety practices and procedures during assembly and test operations.

•Perform tasks in accordance with the company electro-static discharge (ESD) procedures.

•Ability to successfully complete in-house ESD, FOD and solder training.

March 2005– Aug 2013 Quantum Design San Diego, CA

Position: Sr. Mechanical Technician

10307 Lusk Boulevard, San Diego, CA 92121

•Duties include and not limited to building the following Measurement systems: PPMS (physical property measurement system), MPMS Squid VSM (Vibrating sampler Magnetometer-Super conducting Quantum interference device), MPMS (magnetic property measurement system) or Evercool, and PPMS Dynacool (cryogen free package).

•Programs and checks all the wiring/rewiring the device and ensures the program is running perfectly. Sophisticated microprocessor-controlled device that eliminates the need to use or purchase external bridges, current or voltage sources, or lock-in amplifiers.

•Modifies the device if necessary and re-programs.

March 2002– February 2005 Trandes Corporation San Diego, CA

Position: Technician

4301 Pacific Highway, San Diego, CA 92110

•Various responsibilities such as installation and assembly of equipment on the Printer Rock, Laptop Rock and Sinker Rock.

•Drilling, placing of rivets and rib nuts. Installing electrical wiring and fiberglass molding.

•Assembling military Humvees. Sheet metal works as cutting, pipe fitting, soldering, etc.

•Grinding & mechanical assembly.

•Able to read blueprints for installing electrical wirings.

REFERENCES:

Bruce Pilano NIEF Gov. Supervisor 619-***-****

Richard Morrison NIEF Gov. Branch Manager 619-***-****

Samuel McCauley Engineer 619-***-****

Didiet Fiallo NIEF Gov. QA 786-***-****

ED Hall NEIF Gov. 619-***-****

Contact this candidate