United States Engineering Services
Resume:
MR. Michael Stephen
Phelps SR.
Saint Marys, GA 31558
United States
Mobile: 912-***-****
Email:
*********@*****.***
Availability:
Job Type: Permanent
Work Schedule: Full-
Time, Shift Work
Work Experience:
KINGS BAY SUB BASE
TRF
990 USS THOMAS
JEFFERSON DR
Kings Bay, GA 31547
United States
01/1991 - Present
Hours per week: 40
Series: 5210 Pay Plan:
WL Grade: 10
RIGGER WORK
LEADER (This is a
MR. Michael Stephen Phelps SR.
313 Pinedale Dr.
Saint Marys, GA 31558 United States
Mobile: 912-***-****
Email: *********@*****.***
Availability:
Job Type: Permanent
Work Schedule: Full-Time, Shift Work
Work Experience:
KINGS BAY SUB BASE TRF
990 USS THOMAS JEFFERSON DR
Kings Bay, GA 31547 United States
01/1991 - Present
Hours per week: 40
Series: 5210 Pay Plan: WL Grade: 10
RIGGER WORK LEADER (This is a federal job)
Duties, Accomplishments and Related Skills:
WORK HISTORY:
In my(35) years’ experience as a rigger at Norfolk Shipbuilding and Dry-dock, The Jonathan Corporation, Norfolk, Norfolk Naval Shipyard and now at King Bay Naval Subbase, I have become familiar with writing 2 KILOs, 2 LIMAs, and ENGINEERING SERVICES
REQUESTs (ESR). I am able to read and understand
AWRs, and CONTROL WORK PACKAGEs. I am familiar
with scoping out job procedures, and then selecting and MR. Michael Stephen
Phelps SR.
313 Pinedale Dr.
Saint Marys, GA 31558
United States
Mobile: 912-***-****
Email:
*********@*****.***
Availability:
Job Type: Permanent
Work Schedule: Full-
Time, Shift Work
Work Experience:
KINGS BAY SUB BASE
TRF
990 USS THOMAS
JEFFERSON DR
Kings Bay, GA 31547
United States
01/1991 - Present
Hours per week: 40
Series: 5210 Pay Plan:
WL Grade: 10
RIGGER WORK
LEADER (This is a
installing the proper handling gear for the task. After determining the sequence to follow, I then make any necessary preparations to coordinate with other production shops to try and eliminate any and all bottlenecks. I have used my skills with ropes, slings, chains, chain falls and handling gear to lift, move and position heavy or large objects, such as sea valves, fire main valves, motors, generators, also removing pistons and heads off engines from amphibious class and commercial ships. I am also able to install L.E.T. Coffer Dam, L.E.T. House, and L.E.T. Portable Fans, ASW cooling pumps and motors, MCW Ball Valve, High Packs, Scopes and Antennas, BRA-24, TD-14, Flying Buoys, Crank shaft on diesel, Battery change out and Wheel Jobs, Shaft change out on Trident Submarines’ have removed and worked 500 KW Motor Generator on
Trident Submarines’ have also worked on the replacement of #1 and #2- 300 KW Motor Generator Rotor on the
(SSBM-630). I am able to tie various knots, such as square knots, bowling, half hitch, running bowling, and clove hitch. I am capable of manufacturing slings, and mooring lines’ have Crane operator license for up to 30,000 lbs. I’m capable of using crane signal-man hand skills to instruct and communicate with crane operator to accomplish work required.
I can drive and operate a variety of forklifts (propane, gas, and electric) up to 33 K. While working at Norfolk Naval Shipyard and Kings Bay Sub Base TRF I have stood in for the leader on several occasions.
MR. Michael Stephen
Phelps SR.
313 Pinedale Dr.
Saint Marys, GA 31558
United States
Mobile: 912-***-****
Email:
*********@*****.***
Availability:
Job Type: Permanent
Work Schedule: Full-
Time, Shift Work
Work Experience:
KINGS BAY SUB BASE
TRF
990 USS THOMAS
JEFFERSON DR
Kings Bay, GA 31547
United States
01/1991 - Present
Hours per week: 40
Series: 5210 Pay Plan:
WL Grade: 10
RIGGER WORK
LEADER (This is a
As Weight Test Supervisor, I was Supervisor in the weight test shop for One Year, my responsible was assigning nine
(9) men to jobs and seeing that the work was accomplished properly and with adequate timing. I had riggers working in the shop, testing rigging gear from all of the shop at TRFKB, also had to make sure all the boat gear was tested an up to date. I had filled out Controlled Work Package’s, assign over time as needed.
As Temporary Weight Test Supervisor, I stood in for 30 days my responsible was assigning nine (9) men to jobs and seeing that the work was accomplished properly and with adequate timing. . I had filled out Controlled Work Package’s, assign over time as needed.
As a weight test Rigger Work Leader, As temporary
supervisor I stood in for a year and three months my responsible was assigning nine (9) men to jobs and seeing that the work was accomplished properly and with adequate timing. I am familiar with the P-307 guide lines for weight testing. I am familiar with the American Society Of Mechanical Engineers, ASME B30.9-2010, ASME
B30.11-2005, ASME B 30.11-2004, ASME B30.16-2007,
ASME B30.20-2010, ASME B30.26-2010.TLMD, I am
familiar with Controlled Work Package’s. Am familiar with the P-307, Section 14 Rigging Gear and Miscellaneous Equipment.
MR. Michael Stephen
Phelps SR.
313 Pinedale Dr.
Saint Marys, GA 31558
United States
Mobile: 912-***-****
Email:
*********@*****.***
Availability:
Job Type: Permanent
Work Schedule: Full-
Time, Shift Work
Work Experience:
KINGS BAY SUB BASE
TRF
990 USS THOMAS
JEFFERSON DR
Kings Bay, GA 31547
United States
01/1991 - Present
Hours per week: 40
Series: 5210 Pay Plan:
WL Grade: 10
RIGGER WORK
LEADER (This is a
-I am familiar with the WHEPS program used for tracking rigging gear that is due for test and for keeping up with all rigging gear and weight handling gear for 9,000 pieces of rigging gear.
-Capable of writing 2 KILO, 2LIMA and ENGINEERING
SERVICES REQUEST, (ESR).
-Capable of reading and understanding AWR, and
CONTROL WORK Packages.
-Capable of writing GREEN HORNETS.
-Accomplish weight tests with test memorandums.
-Work from oral or written instruction to accomplish operational test.
- I am familiar with SSB (G, N) Class Weapon Handling Test Load Methods.
- I oversee the testing of the Torpedo Room on the SSB.
- I am familiar with NAVFAC Instruction 11450.1,
NAVSUP Instruction 10490.33
- I am familiar with NAVSEA OP 5,
- TRIREFFAC KINGS BAY INSTRUCTION 10490.4
As a weight test Rigger, I am responsible for
manufacturing, purchasing, testing, maintaining, tracking, recording and recalling all rigging gear and lifting devices equipment. Such as grommets, pendants, shackles,
eyebolts, lever hoists, chain falls, spreader bars, etc. I lead the work of weight test personnel and provide continuous leadership for 7 to 9 weight tester positions performing full assignments associated with typical work. I plan, prioritize and schedule all work requiring weight lifting and handling MR. Michael Stephen
Phelps SR.
313 Pinedale Dr.
Saint Marys, GA 31558
United States
Mobile: 912-***-****
Email:
*********@*****.***
Availability:
Job Type: Permanent
Work Schedule: Full-
Time, Shift Work
Work Experience:
KINGS BAY SUB BASE
TRF
990 USS THOMAS
JEFFERSON DR
Kings Bay, GA 31547
United States
01/1991 - Present
Hours per week: 40
Series: 5210 Pay Plan:
WL Grade: 10
RIGGER WORK
LEADER (This is a
equipment, testing with tended units, and other
TRIREFFAC shops/codes. I have the ability to cut, splice, assemble, repair, install, and test a variety of complex standing an
SUPPLEMENTAL QUALIFICATION STATEMENT
As a Rigger in the private sector for 9 years, at Norfolk Shipbuilding and Dry-dock, The Jonathan Corporation, Norfolk, Norfolk Naval Shipyard, I gained a broad
knowledge of equipment, practices and procedures of the Rigger Trade.
Knowled
Supervisor: C. JOHNSTON 912-***-****)
Okay to contact this Supervisor: Yes
Education:
OSCAR SMITH Chesapeake, VA United States
High School or equivalent 06/1979
Relevant Coursework, Licenses and Certifications:
EDUCATION:
-I have taking and completed training course:
-Category 2 Crane Safety - course ID: NCC-C2CSR-02
-Crane Mechanic - course ID: NCC-CM-01
-Crane Electrician - course ID: NCC-CE-01
-Load Test Director - course ID: NCC-LTD-01
MR. Michael Stephen
Phelps SR.
313 Pinedale Dr.
Saint Marys, GA 31558
United States
Mobile: 912-***-****
Email:
*********@*****.***
Availability:
Job Type: Permanent
Work Schedule: Full-
Time, Shift Work
Work Experience:
KINGS BAY SUB BASE
TRF
990 USS THOMAS
JEFFERSON DR
Kings Bay, GA 31547
United States
01/1991 - Present
Hours per week: 40
Series: 5210 Pay Plan:
WL Grade: 10
RIGGER WORK
LEADER (This is a
Job Related Training:
EDUCATION:
-I have taking and completed training course:
-Category 2 Crane Safety - course ID: NCC-C2CSR-02
-Crane Mechanic - course ID: NCC-CM-01
-Crane Electrician - course ID: NCC-CE-01
-Load Test Director - course ID: NCC-LTD-01
Contact this candidate