Pipe Designer Project Managers

Anthony Thompson

Cell contact: 228-***-**** Email address: *********@*****.***

Summary

To obtain a full-time position with a company that will utilize my strong computer and piping design skills. Sr. Mechanical/Piping Design with 16 years of field and plant experience. Well versed in 2D & 3D modeling, Navis works etc.

Achieve budget goals, train drafters design layout from craft installation, understanding ASTM, ANSI specs. Gain special trust from project managers large projects to be on budget on time. Work Experience

Yates Engineering – Birmingham, Al March 2023 to Present Sr. Pipe Designer

• (Assigned to Birmingham office) Sr. Pipe Designer Using Cadworx 3D and Navisworks software. Use engineering piping diagram to route various piping systems.

• Routed various piping through point cloud laser scans use Recap to locate existing piping in area,

• Create tie-in drawings to locate tie-in point locations for contractors. Camposepc – Houston, TX Sept 2021 – Nov 2022

Sr, Pipe Designer

• (Assigned to Denver southwest region office) Sr. Pipe Designer Using Cadworx 3D and Navisworks software. Use engineering piping diagram to route various piping systems.

• · Created 2D detail drawings using AutoCAD from the 3D models, as well as fabrication detail drawings and bill of material per design specification.· Coordinated all mechanical piping systems, mechanical equipment layout. Upstream, valve station pipeline and compressor station. Effectively communicated with project managers and project engineers during the design, drafting and construction process. Communicated any anticipated challenges and schedule progress weekly. MSBenbow and Associates - Newport News, VA April 2021- September 2021 Sr. Pipe Designer

• Using Shipconstructor 3D and Navisworks software. Use engineering piping diagram to route various piping onboard ships.

• Created 2D detail drawings using AutoCAD from the 3D models, as well as fabrication detail drawings and bill of material per design specification.

• Coordinated all mechanical piping systems, mechanical equipment along with other elements of compressor stations. Effectively communicated with project managers, project engineers during the design, drafting and construction process. Communicated any anticipated challenges and schedule progress weekly.

Gibbs and Coxs. - Newport News, VA April 2021- September 2021 Sr. Pipe Designer

• Using Shipconstructor 3D and Navisworks software. Use engineering piping diagram to route various piping onboard ships.

• Created 2D detail drawings using AutoCAD from the 3D models, as well as fabrication detail drawings and bill of material per design specification.

• Coordinated all mechanical piping systems, mechanical equipment along with other elements of compressor stations. Effectively communicated with project managers, project engineers during the design, drafting and construction process. Communicated any anticipated challenges and schedule progress weekly.

Hunt, Guillot and Assoc. - Birmingham, Al Nov 2013-March 2020 Sr. Pipe Designer

• Using Intergraph CadWorx I was responsible for creating 3D models for pipeline service (Up- stream and Down-stream), compressor stations inter-connecting piping systems. Also, created 3D model fabrication shop drawing for (Launcher and Receiver) to preform pigging installation to service various pipeline system.

• Created 2D detail drawings using AutoCAD from the 3D models, as well as fabrication detail drawings and bill of material per design specification.

• Marked-up process diagrams after piping and vendor drawings have been field verified.

• Coordinated all mechanical piping systems, mechanical equipment along with other elements of compressor stations. Effectively communicated with project managers, project engineers during the design, drafting and construction process. Communicated any anticipated challenges and schedule progress weekly.

Ref-Chem – Houston, TX April 2013-October 2013

Sr. Pipe Designer

• Create 3D model from (P&ID) piping instrumentation drawing, assist engineer with pipe routing on various system and pipe specification requirements.

• Mark-up process diagrams after piping and vendor drawings have been field verified

• Draft field sketch into Cadworx for construction drawings. Talascend - Mobile, AL (Assigned to URS New Orleans) Feb 2012-April 2013 Sr. Pipe Designer

• Field verify (P&ID) piping, walk down process piping, survey and measure. Mark-up process diagrams after piping and vendor drawings have been field verified. Draft field sketch into Intergraph CadWorx for construction drawings.

Orion Engineering - Theodore, AL (Assigned to Chevron Refinery) Jan 2011-Feb 2012 Sr. Pipe Designer

• Field verify (P&ID) piping, walk down process piping, survey and measure.

• Mark-up process diagrams after piping and vendor drawings have been field verified

• Draft field sketch into Cadworx for construction drawings. Jerry Pittman & Assoc. - (Assigned to Avondale Shipyard) July 2007-December 2011) Sr. Designer

• Verify document change against drawing and correct 2-D piping arrangement drawing for clarity for single piping system layout. Also,

• 3-D modeling design changes from engineering change document. Assigned to: (Marinette Marine Incorporated) LCS contract

• Routed various pipe system using engineering design diagrams for machinery compartments.

• Verified correct connections with vendor drawings and instrumentation to various piping equipment and machinery.

Assigned to Northrop Grumman (Ship Systems) Pipe dept,

• Catia 3-D modeling design (DDX 1000)

• Routed various pipe system using engineering design diagrams for machinery compartments.

• Verified correct connections with vendor drawings and instrumentation to various piping equipment and machinery.

• Work very closely with mechanical engineers and piping craftsman in pipe shop. Universal Personnel - (Assigned to Chalmette), LA Exxon/Mobil Refinery April 2005-July2007 Field Technician

• Field verify (P&ID) piping and instrumentation drawing on various equipment.

• Mark-up process diagrams after piping and vendor drawings have been field verified

• Work with loop sheets to verify correct connection with instrumentation of various equipment.

Northrop Grumman - New Orleans, LA (Ship Systems Avondale) Jan 2004-April 2005

(Field Engineering team)

Pipe Designer

• Ship check and resolve field problems with craft, piping and mechanical issues.

• Write field problem reports (FPR) to support craft with changes on board ship and other areas that have problems.

CDI Marine - Moss Point, MS (Assigned to Ingalls) November 2002-Jan 2004 Field Technician

• Engineering label plate/validation (Q A) group.

• Ship check (HME) Hull, Mechanical and Electrical in various compartments on board the

(DDG) class “Aegis Destroyer” for label plate locations.

• Work with the Damage control group verifying compartments.

• Use ship installation draws to verify complex piping systems when needed.

• Communicate with “JJMA” signing off on board compartments when Q A is completed. Jerry Pittman & Assoc. - Gautier, MS (Assigned to Northrop Grumman) Jan 2001-Sept 2002 Sr. Designer

• Added piping penetrations throughout the 3-D model machinery areas.

• Routed piping on various system using piping diagram drawings. M.S. Benbow & Assoc. - Metairie, LA (Assigned to Exxon/Mobil) Sept.1995-Jan 2001 Sr. Designer

(TML) Technical Measurement Group Dept.

• Field verify merit “ISO’s” (Isometric) drawings for various piping systems for corrosion.

• Create new drawings for x-rays can be performed by analysis group.

• Assist engineers with pipe routing on various systems.

• Revise (P&ID) piping instrumentation drawing.

• Develop process piping diagrams after piping have been routed in various units. Jerry Pittman & Assoc. - Metairie, LA (Assigned to Avondale Shipyard) May1995-Sept. 1995 Sr. Pipe Designer

Mechanical Composite Group

• Routed various piping systems according to specification or “Ice Breaker” contracted by Avondale.

• Check for interference on other piping composite layouts. Key Software

Autodesk plant 3D 2020

Intergraph CadWorx 2018/19

SSI Ship Constructor

Oracle Solaris (Unix)

Catia

Bentley Microstation v8i

Autodesk AutoCAD 2018

Microsoft Office Suite

Education

Associate of Mechanical Design Technology (1985)

Mississippi Gulf Coast Community College, Gautier, Ms Certificates & Licenses

Transportation Worker Identification Credential (TWIC)

Contact this candidate