Machine Operator Continuous Improvement
Resume:
JUAN A GALVAN
Anthony NM *****
****************@*****.***
Career Objectives
To find an opportunity that will allow me to demonstrate that I am a hard-working individual, who is anxious to increase my knowledge, there by becoming an asset to the company.
03/17/2023 To 04/03/2024
PVC EXTRUDER AND JACKETING Southwire
To perform the job, it learns the machine and operate correctly know all the tricks special when clean up the crosshead and low all temperatures. That’s how to know the job and do easily.
My Responsibilities for Machine Operator:
Responsible for the proper setup, changeover, and overall operation.
Responsible for verifying correct reels, dies and tapes are loaded based on shop paperwork outlined by planning.
Responsible for monitoring and adjusting various machine controls for a quality product.
Responsible for completing and reporting all necessary quality checks.
Responsible for accurate cut lengths of plexxed cable based on shop paperwork outlined by planning.
Responsible for the proper labeling, staging and storage of bobbins.
Completing required paperwork and Advaris transactions at the start, during and end of each run.
Responsible for reporting all maintenance and quality issues to supervisor.
Ability to sit/stand/move for up to 12 hours a day.
Partner with internal resources on process improvements to foster a culture of continuous improvement.
Report all incidents of Safety and Quality violations in support of a Culture of Zero.
Responsible for maintaining general housekeeping to maintain the 5s.
Responsible for get the correct tooling and print legend wheel.
Responsible for check all Line for running good, sparkers all OD Lasers, the hot OD, and the cold OD.
Check all poles for roll the wire on position. Responsible for check the take up that works properly and check the correct material of Jacketing that means PVC, COLOR, PAPER, and the wire run that run for the order.
Responsible for get the forklift training and certification to drive proper equipment.
My Responsible for Take up:
Perform take up and pay off operations as required.
Layer wind cable to customer specified ship out length and reel.
Properly utilize production order to meet all customer requirements.
Operate per the applicable procedures.
Change out reels of cable while maintaining line function
Utilize tagging system to label reels
Make minor adjustments and repairs to machines
Operate take up and assist line operator with running the machine.
Perform all other duties as assigned.
Assist operators with lines
Operate per the applicable procedures.
Change out reels of cable while maintaining line function.
Utilize tagging system to label reels
Make minor adjustments and repairs to machines.
Properly utilize production order to meet all customer requirements.
Operate take up and assist line operator with running the machine.
The Take Up 1 is an entry level role that is responsible for rewinding material into a specified length while spark testing. Strip PVC and Nylon insulation off copper and aluminum wire that is to be sent to the Carrollton Rod Mill or the Kentucky Rod Mill.
That’s all 3 parts of take up for do the Job correctly and make the easy job, That perform a job.
11/02/2021 TO 02/07/2023
EQUIPMENT OPERATOR II, profrac
Opérate equipment on location.
Maintain equipment.
Assemble iron pipes and heavy grade hose into specific configuration.
Connects pump trucks to iron pipes.
Controls the amount of sand loaded into hopper.
Maintains discharge of pressure to the frac pump.
Maintains suction and keeps the tub level.
Specific duties require rig up, rig down, equipment operation and maintenance of same equipment as directed by supervisory staff.
adheres to all well service health, safety and environmental regulations.
Attaches pumps and hoses, assembles equipment, and/ or monitors controls panels affecting pumping operations.
Perform routine maintenance on all assigned service equipment.
Performs other related duties as required.
I know to operate the Chemicals are also operated the Hydration and I was in the process of learned the blender and any other Machine, also I knowing how to handle the forklift.
I use any type of mechanical tools. But also I know to move pumps and put in back.
Right know I’m in the process of getting my CDL first of all.
Eaton El Paso Tx: Oct,2020 To Oct,2021
Warehouse Kitter:
To Collect many cars and transfer to production area.
As finish the car with all adequate material or parts that they needed.
Also, we swap the roll of auditor for check the car that we made.
Ware House Receiving:
As a use a forklift and Scanner or lap top for put on racks or to accommodate the material on several locations.
Scanning bar codes to put new material on different locations.
Also unload trailers and audit the material that come damage, to put and separate the hot material that production needs for the day.
Instaff Santa Teresa NM:
Expeditors (2019-2019)
Shipping and Receiving
Pulling and preparing shipping orders utilizing different type of programs.
The oracle program computer and scanners.
Manhattan program in used for inventory and cycle counts computer and scanner.
Manpower El Paso Tx.
Trans Expedite (2018-2019)
Shipping and Receiving Clerk.
Pulling and preparing shipping orders utilizing scanners and barcoding labels. Receiving and verifying the status of all incoming material with packing slip. Stage incoming material in appropriate warehouse location or deliver to corresponding department or person. Loading, wrapping, securing shipments utilizing forklift equipment and preparing bill of ladings also contacting designated carriers for pick up. Unloading and inspecting all shipments for damages and count.
Computer Knowledge: Excel, Power point, Word, Outlook, Microsoft Office.
Excellent Communication and Write Skills.
Knowledge of inventory programs PKM 3,5, SAP Scanners
Preparing formal Documents and presentations
Experienced in Leadership and mentoring roles.
Certified forklift Operator/C.P.R.
T.S.A Certified
Objective Opportunity for full time employment within the logistical field while using my work experience.
Allegiance Staffing El Paso TX.
Farmers Dairies (2018-2018)
I was a Material Handler, and a forklift driver. I do a different type of things firs load and unload by hand half gallons and gallons. Also unload pallets of empty crates of milk. And load all smart thermo trailers with several pallets of milk.
W. Silver (2018-2018)
I was a forklift operator, I handled and operated different machines but mostly, I moved the trailer and the containers when I loaded, and they were full. I also used the cranes to fill the train containers.
Manpower El Paso Tx.
USA PRODUCTIONS (2018 – 2018)
-Material Handler: Bring material to all machines depends on if all Rus, that is different part numbers also refile all the tables when are finished. Using skids of wood to put all 12 or 25 pieces the skid, and before that I am using a metal strap to tie them up and put them on location to load the trailer the nest morning.
-Quality Inspector : I inspected all the parts that came out of the machines that did not come out badly welder or tubes punctured. That they would weld correctly and that the welding balls would not come together.
AZAR NUT COMPANY TruTemps Staffing Group
Forklift Operator (2017- 2017)
As Forklift operator on Roasting Area. I Transferred pallets of crude product to the Machines to sew it and send it in super sacks or bins. I was in charge of the CR1, CR2, the kettles 2, kettles3. And dumped the bin in a super suck. Remove the bins when they stop running the machines, move everything behind Roasting. To accommodate in each of your Canvas. also was in charge of giving Maintenance to the Forklift that used the P5 to wash it and clean it that did not bring trash, product r foreign material. Every two weeks. We runner peanut Butter The type of forklifts that we used the Stand up.
Tree House Private Brands El Paso TX.
Forklift Driver and Machine Operator ( 2014 – 2016)
As Forklift Driver and production Associate I transferred pallets and loaded, packaging lines with 800-1000 pounds bins at heights over 20 feet. I lift more than over and 50 pounds. I also helped run the machinery and checking. I do consistent forklift and frequent safety checks.
Chipping and Receiving Department (2005 – 2024)
I qualified and certified to operate a different type of forklift.
I have over 20 years’ experience in the warehouse industry.
I have 3 yeas hydraulic Fracking.
I have almost 2 years Jacket Line Extrusion PVC
- Duties doing and using forklift.
- Material Handler.
- General Labor.
- Welder.
There assigned to different duties to include.
-Load/unload. Shipping. Receiving. Login on the scanner system using Oracle program. Inventory/pre inventory. Sickle count.
EDUCATION (1999 – 2005)
-Santa Teresa New Mexico
-Desert Pride Academy
-Canutillo HS Texas
Occupational License or certification
-Forklift certification
-Security Officer Commission Card
Computer skills
Typing speed: 20 words per minute
-Email Software (outlook, Thunderbird, etc.)
-Internet Browser (Internet Explorer. Firefox. Etc.)
-Networking or land Software (cisco, etc.)
-Peripheral Devices (Scanners, Printers, Systems, etc.)
-Personal computers
-Presentation Software (power Point, Flash, etc.)
-Presentation Language (Bilingual English, Spanish)
-Spreadsheet software (Calk, Excel, etc.)
-Word Processing Software (Word, WordPerfect. Etc.)
Sand Ridge / Lariat Energy
Sand Ridge/Lariat Industrial (2007-2008)
Worked with a team, that we worked on the complex and intricate, Oil and Gas. The most of the times we are transport the oil & gas to the refinery also we transport material and Outlines to include layout and assembly of structure. Some of the days we are rote in turns about who goes to refinery and who not. That we transport a different type of mixtures.
In charged to connecting pipes and hose, check licks and corrosion.
Clean and count all the equipment on store on the compartments storages the machine tools.
Recognized the positive attitude.
Excellent attendance.
Language Skills
Spanish – Excellent (Read, Write, Speak.)
English – Good (Read, Write, Speak.)
Skills
Creativity
Leadership
Organization
Problem Solving
Teamwork
Communication
Motivation
Computer
Contact this candidate