Mechanical Engineering Assistant Professor

Curriculum Vitae

NAME : SAHIB SINGH

FATHERS NAME : S. BALKAR SINGH

D.O.B. : 10-04-1982

GENDER : MALE

NATIONALITY : INDIAN

MARITAL STATUS : MARRIED

PERMANENT ADDRESS : 1145/8, NANAK NAGAR JAMMU-180004

MOBILE : 969-***-****

EMAIL : ******@*****.***, *****.***@*********.**

DEPARTMENT : MECHANICAL (AS&H)

DESIGNATION : ASSISTANT PROFESSOR

JOINING DATE : 10 October, 2007.

TEACHING EXPERIENCE : 14 YEARS +

EDUCATION QUALIFICATION/ CERTIFICATE COURSES

In May 2012, Awarded Master of Technology in the discipline of Manufacturing and Automation in regular mode, scoring 9.11 CGPA out of 10 point scale from Shri Mata Vaishno Devi University (SMVDU), Kakryal, Katra, Jammu, Jammu and Kashmir, India.

In July 2006, Awarded Bachelor of engineering in the discipline of Mechanical Engineering, with 64% from MBSCET, affiliated to University of Jammu, Jammu and Kashmir, India.

Certificate Course on “Basic Autocad and Solidworks” from 5 March 2009 to 5 August, 2009 at Cadence Centre, Jammu, Jammu and Kashmir, India.

Certificate Course on “Technology Based Entrepreneurship Development programme (TEDP)” Conducted by Department of Science and Technology, Govt. of India from 28th December, 2006 to 15th February, 2007 at DIC Complex, Exhibition Ground, Jammu, India.

Certificate Course on “Computer Applications” from 10 December 2001 to 25 May, 2002 from Directorate of Correspondence Courses, (Kurukshetra University), Centre at Jammu, Jammu and Kashmir, India.

DISSERTATION/PROJECTS

Masters Programme dissertation topic: Investigation of Machining Response of LM13SiC Composite using Tungsten Carbide Tool.

Bachelors Degree Project: Motorized painting System (MOPAS).

WORK EXPERIENCE

Assistant Professor in Mechnaical Engineering Department, Model institute of engineering and Technology, Jammu (2007- till date).

Lecturer in Mechanical Engineering Department, Model institute of engineering and Technology, Jammu (2007-2013).

Design and Development Incharge in R&D department, Century auto Engineering Pvt. Ltd. Gurgaon, NCR, Haryana (2006-2007).

Service Advisor in National Garage, Tata Motors, Gangyal, Jammu, Jammu and Kashmir (2006).

COURSE/SUBJECT TAUGHT

ENGINEERING MECHANICS (M-104)

ENGINEERING DRAWING (M-106)

ENGINEERING MECHANICS LAB. (M-109)

WORKSHOP TECHNOLOGY -1 (M-110)

WORKSHOP TECHNOLOGY-2 (M-210)

MACHNIE DRAWING (M-206)

ENGINEERING GRAPHICS (ESC-102, 202)

THERMAL ENGINEERING (M-314)

MECHANICAL ENGINEERING. (M-412)

INDUSTRIAL ENGINEERING

ENVIRONMENT AND SUSTAINABILITY

PROFESSIONAL PRACTICE, LAW AND ETHICS

RESEARCH PAPERS

Paper presented in National Conference on Innovation Trends in Mechanical Engineering (NCITME-2018) titled “Thermal Analysis of Car Cabin, when parked in open” Organized by School of Mechanical Engineering Department, SMVDU, Katra, on 23rd to 24th March, 2018.

Paper published in International Journal of Advanced Engineering Technology Titled “Influence of Cutting Forces in Drilling of 34CrMo4” (ISSN 0976-3945) in Oct.-Dec.,2016/16-17.

Paper published in International Journal of Advanced Engineering Technology Titled “Comparative Analysis of Thermal Accumulation at various points inside a Car Cabin” (ISSN 0976-3945) in Oct.-Dec.,2016/13-15.

Paper Selected in International Conference of Mechanical Engineering and Technology (ICMEM), Canada, Titled “Investigation of Machining Response of Lm13/SiC Using RSM Approach” in August 2013.

Paper published in International Journal of Enhanced Research in Science Technology & Engineering Titled “Machining Response in Turning Aluminium Composite LM13 With 15% SiC” (ISSN NO: 2319-7463) in Oct -2012.

Paper presented in National Conference on Recent Advances In Mechanical Engineering (NCRAME-2011) titled “TQM Implementation in Concrete Manufacturing Unit” on 1st July, 2011.

WORKSHOPS/TRAININGS

Participated in AICTE Sponsored One day faculty development Programme Conducted by Kongunadu College of Engineering and Technology, Trichy, on “The Role of E-waste as filler for composite-An Overview” on 10 September 2021.

Participated in AICTE Sponsored faculty development Programme Conducted by Manav Rachna International Institute of research and Studies, on “Design thinking for Manufacturing Excellence 2021” from 6 September 2021 to 10 September 2021.

Participated in AICTE Sponsored faculty development Programme Conducted by PSG College of Technology, Jammu on “Electric Vehicles 2018” from 24 August 2018 to 28 August 2018.

Participated in faculty development Programme Conducted by SMVDU, Katra, Jammu on “Sustainable Design and Manufacturing (SDM-2018)” from 12 February 2018 to 16 February 2018.

Participated in AICTE recognized one week Short Term Course on “Research Methodology” through ICT from 9 January 2017 to 13 January, 2017 at Model Institute of Engineering and Technology, Jammu conducted by National Institute of Technical Teachers Training and Research (NITTTR), Chandigarh.

Participated in faculty development Programme Conducted by NIT, Jalandhar on “Perspectives of Machining- Present and Future” from 12 February 2018 to 16 February 2018.

One year “Advance Mentoring Programme” Certificate of completion for leadership development by MIET (01 January- December, 2016)

Participated in AICTE recognized one week Short Term Course on “Induction training Programme” through ICT from 9 Sept. 2013 to 13 Sept, 2013 at Model Institute of Engineering and Technology, Jammu by National Institute of Technical Teachers Training and Research (NITTTR), Chandigarh.

Participated in Short Term Course on “Design & Analysis of Engineering Experiments” from 4 July 2011 to 8 July, 2011 at Gautam Buddha University, Greater Noida, U.P. (India).

Workshop on NBA Accreditation – Outcome based on Evaluation by Prof. I.K. Bhat, Director MNIT Jaipur and Prof. Lalit Awasthi NIT, Hamirpur, held at MIET, Jammu

Attended workshop on “Mission 10X” organized by WIPRO conducted at MIET, Jammu from 6th March 2014- 8th March, 2014.

3 Months industrial training at Tata motors, National Garage, Gangyal during B.E. Course.

AWARDS/HONOURS/APPRECIATIONS

Build for Future Research Award by MIET for publishing paper in International Journal of Advanced Engineering Technology Titled “Influence of Cutting Forces in Drilling of 34CrMo4” (ISSN 0976-3945) in Oct.-Dec.,2016/16-17 on 23 March, 2018.

Build for Future Research Award by MIET for publishing paper in International Journal of Enhanced Research in Science Technology & Engineering Titled “Machining Response in Turning Aluminium Composite LM13 With 15% SiC” (ISSN NO: 2319-7463) in 17 December, 2013.

One year Certificate for completion of “Advance Mentoring Programme” for leadership development by MIET (01 January, 2016 - December, 2016)

Certificate of appreciation for organizing “Annual Competition-2011” by SMVDU Collegiate Club, School of Mechanical Engineering, SMVDU, Kakryal, Katra, Jammu and Kashmir, India

UNIVERSITY SERVICES

Appointed as Evaluator by University of Jammu for evaluating Engineering Graphics, Engineering Mechanics, Machine Drawing (Regular/Supplementary) Examination, a number of times.

Appointed as Centre superintendent by University of Jammu for the smooth conduct of B.E. 1st, 2nd, 3rd, 4th, 5th, 6th, 7th, 8th Semester (Regular/Supplementary) Examination, a number of times.

Appointed as Deputy superintendent by University of Jammu for the smooth conduct of B.E. 1st, 2nd, 3rd, 4th, 5th, 6th, 7th, 8th Semester (Regular/Supplementary) Examination, a number of times.

Appointed as Centre supervisor by University of Jammu for the smooth conduct of B.E. 1st, 2nd, 3rd, 4th, 5th, 6th, 7th, 8th Semester (Regular/Supplementary) Examination, a number of times.

Appointed as Centre supervisor by University of Jammu for the smooth conduct of B.Ed. Regular Examination.

CONTRIBUTIONS TO MIET

Assistant Professor in Mechanical Engineering Department, Model institute of engineering and technology, Jammu (01 Oct. 2007 to till date)

Lecturer in Mechanical Engineering Department, Model institute of engineering and technology, Jammu (01 Sept. 2007- 30 Sept. 2013 )

Convener, NSS Committee, MIET

Ex- Member, NSS Committee, MIET

Ex- Member, Media Club, MIET

Ex- Member, Advanture Club, MIET

Contributed during Inspection of JU, AICTE, NAAC Etc.

Initiated Training to workshop staff on CNC trainer LATHE

Conducted Orientation Programme for B.E. 1st semester

Actively Participated in motivating students for Boot Camp

Participated in Boot Camp-Outstation trip to Patnitop, Jammu.

Actively Participated in Sammilan every year.

Vishwakarma Day Celebration.

Team member, Stock Verification of all items for workshop

Team member, Purchase of workshop items for 1st semester and 2nd semester, a number of times

CONTRIBUTIONS TO DEPARTMENT

Assistant Professor in Mechanical Engineering Department, Model institute of engineering and technology, Jammu (01 Oct. 2013 to till date)

Lecturer in Mechanical Engineering Department, Model institute of engineering and technology, Jammu (01 Sept. 2007- 30 Sept. 2013 )

To attend/conduct the departmental meetings

Class incharge for BE 1st semester and 2nd semester students

Mentor to BE 1st semester and 2nd semester students

CONTRIBUTION AS NSS CONVENER

Village AMB adopted in block Bhalwal.

Distribution of items in Middle School, Amb.

Life time Bima of Villagers.

Inauguration of Toilet at Middle School, Amb.

Swachh Bharat Summer Internship-2018.

Swachh Bharat Summer Internship Certificate facilitation Programme.

Flood Relief for Kerala Collection and forwarding the amount to Red Cross Society.

Blood Donation Camp.

Lectures on Computer basics in Middle School, AMB.

Institute’s Swachhta Ranking report.

NSS(E&O) Brochure.

Eye and Physical Checkup Camp.

Middle School Windows Repairing and fixing of Acrylic Sheet.

Made collection for various activities/events/organizations.

Conduct Orientation of B.E. 1st semester students about NSS committee

Registration of Volunteers for NSS Unit of MIET

Organizing different activities of NSS committee.

ACADEMIC CONTRIBUTIONS

Use of 3D (Wooden) Models for Engineering Graphics and Machine Drawing

Use of 3D software for Engineering Graphics and Machine Drawing.

Use of ICT Lectures as per Institute policy

Excellent Academic Results

Remedial classes for week students

Enrichment classes for B.E. students

Setting of Sessional Tests/ Assignments

Conduct of Sessional Tests

Evaluation of Sessional Tests and Assignments

Compilation of Internal Assessment Records

Conduct of Workshop/Mechanics Lab Viva-Voice

Conduct of Regular class work and Lab Work

Contact this candidate