Electrical Engineer Project

IRVING BOLÍVAR

ELECTRICAL ENGINEER

@

Location: Katy, TX.

Email: *********@*****.***

Telephone 346-***-****

Education

Studies

Institution

Date

Electrical Engineer

Zulia University

1999

Areas of knowledge & skills

Development of conceptual, basic and detail engineering.

Power system modeling with ETAP software: short circuit study, load flow study, harmonic study, motor start study and grounding system design.

Lighting systems modeling with Litestar and Dialux software.

Electrical protection grounding and lightning protection systems.

Sizing and specifications of cables and electrical equipment (transformers, power distribution center, ups, rectifiers, among others).

Classification of hazardous areas.

Design drawing of: canalizations routes, location of electrical equipment, control schematics, engineering details

Ability to interpret and draw diagrams of various electrical systems.

Design capacity of low, medium and high voltage electrical installations, for the supply of electric power.

Development of multidisciplinary engineering projects for the oil/gas, refinery and petrochemical industry.

Coordinating and executing project activities in all design phases, such as conceptual, basic, detail and construction assistance, involving all type of facilities, in land and offshore, "downstream" and "upstream".

Widely familiar with international design codes and operator standards, i am also an expert in the production, control and QA / QC of drawing and electricity discipline documents.

Troubleshooting & field support.

Quality control and commissioning of electrical tests and construction works.

Develop daily reports.

Planning and control of electricity deliverables.

Ability to work team.

Oriented to achievement.

Leader and motivating.

Effectiveness in decision-making.

Training

ETAP 7.0.

protection systems with ETAP 7.0.

basic level of P.L.C.

special grade work of standard IEC 287 "Calculation of the continuous current rating of cables (100% load factor)"

SHA - Modulo "C".

Cold and hot work permits-dangerous atmospheres.

First aid. module a.

Analysis of safety at work.

Prevention and control of fires. module a.

Basic instrumentation for engineering of design.

AutoCAD 2000. basic.

Authorization electrical maneuvers level 0.

Professional Experience

I am Electrical Engineer, with 25 years of experience in the development of multidisciplinary engineering projects for the oil / gas, refinery and petrochemical industry, working in engineering consulting companies, coordinating and executing project activities in all design phases, such as conceptual, basic, detail and construction assistance, involving all type of facilities, in land and offshore, "downstream" and "upstream". During that time, I performed different positions, such as Junior Engineer, Field Engineer and Senior Engineer. I am widely familiar with International design codes and operator standards, I am also an expert in the production, control and QA / QC of blueprints and electricity discipline documents. I know how to manage software related to the specialty: ETAP.

Company: EPS GROUP (USA)

Position: Technical Support Engineer (Since August 2023 –Current)

Company: IDOM (COLOMBIA)

Position: Project Engineer (Since August 2022 – January 2023)

Project: "Detailed engineering for Cupiagua strategic conditioning".ECOPETROL

Project: "Advanced pre-conceptual engineering for Gibraltar production facilities". ECOPETROL

Company: INGECONTROL(COLOMBIA)

Position: Project Engineer (Since June 2022 – August 2022)

Project: "Detail engineering of VRF test bench - Chichimene station". ECOPETROL

Project: "Detail engineering for the relocation of measurement arms 6 and 7 of the ECH CRUDE OIL DISPATCH - CHICHIMENE STATION". ECOPETROL

Company: ACJ HIGH VOLTAGE (COLOMBIA)

Position: Project Engineer (Since April 2022 – June 2022)

Project: "Remodeling of s/e Aipe 34.5/13.8 kV, construction of new s/e Patá 34.5/13.8 kV, construction of new medium voltage 34.5 kV line to connect s/e Aipe with S/E PATÁ".

Company: JMVM (COLOMBIA)

Position: Project Engineer (Since July 2021 – December 2021)

Project: "Civil, mechanical, electrical and instrumentation works required for the assembly and installation of equipment associated with gas treatment at Santa Clara Battery". Neiva Huila. ECOPETROL

Project: "Civil, mechanical, electrical and instrumentation works required for the assembly of electric motors in the GPA batteries, to close the findings in area classification, screening and retie". Neiva Huila”. ECOPETROL

Project: "Civil, mechanical, electrical and instrumentation works required for the construction and/or adaptation of facilities in the fields Dina norte and Tempranillo for the project water disposition area Huila". ECOPETROL

Project: "Contract: sur-ods-301****-*** "civil, mechanical, electrical and instrumentation works required for the assembly of electrical motors in the GPA batteries, to close the findings in area classification, screening and RETIE". ECOPETROL

Project: "Civil, mechanical, electrical and instrumentation works required for the construction of line and facilities for water injection in well Palermo 07". ECOPETROL

Company: DATABANKMKS MKS (COLOMBIA)

Position: Chief of Discipline Electricity (Since June 2019 – April 2020 / June 2020 – Agosto 2020 / November 2020 – March 2021)

Project: “Survey of technological information of the process for the ecopetrol southern regional vice presidency facilities”. in the facilities: Yaguará, Monal, Pía Monal, Generación Monal, Satélite, Terciarios, Pia Terciarios, Churuyaco, Mansoyá, Rio Ceiba Sur, Rio Ceiba Norte, Santa Clara, Dina. ECOPETROL

Company: INGPROEL SAS (COLOMBIA)

Position: Project Engineer (Since January 2019 – June 2019)

Project: Detail Engineering. Preventive maintenance projects

EXPERIENCE IN VENEZUELA

Company: IDS CONSULTANTS

Position: Chief of Discipline Electricity (Since February 2016 – October 2017)

Position: Project Engineer (Since February 2010 – February 2016)

Project: Detail Engineering, Electric Substation Urdaneta West, PDVSA PETRO REGIONAL DEL LAGO.

Project: Conceptual Engineering for the updating of liquefied gas relief systems from oil to burner (TEA) at the Cenit Stations of Hydrocarbons Logistic Transportation, ECOPETROL

Project: Flow System Adaptation

EF-21-5 AND EF-16-5", PDVSA

Engineering of Details: Preparation of the following documents and blueprints: Calculation memory, cables list; blueprint of channeling route; single layer diagrams, submersible pump control schematic, load studies, materials list, grounding system and air discharge protection blueprints, electrical board diagrams, piping details, installation details, and grounding details.

Project: Study Ecopetrol Plants Type, ECOPETROL.

Knowledge of Colombian regulations and development of deliverable products that allow to establish the criteria of designs and to define the typical distribution, minimum areas of design and the minimum distances that due to security, operation and maintenance must exist between administrative and industrial buildings, as well as units and process equipment that ensure a safe plant type, easy to build, operate and maintain; The products generated are listed below: flat location of electrical equipment, classification of hazardous areas, layout of exterior lighting, layout distribution of earth and protection against lightning, definition of types of substation depending on load.

Project: Acquisition of Water Purification Systems for life quality modules in Maracaibo Lake, in the Flow Stations: CENTRO 6, EF-10-7, EF-2-6, EF-21-5 AND CENTROIDE, PDVSA.

Engineering of Details: Preparation of the following documents and blueprints: Calculation memory, cables list; blueprint of channeling route; single layer diagrams, submersible pump control schematic, load studies, materials list, grounding system and air discharge protection blueprints, electrical board diagrams, piping details, installation details, and grounding details.

Project: Electric Substation Replacement HTSS-40L TDE LA SALINA", PDVSA

Basic Engineering: Preparation of the following documents and blueprints: Calculation memory, list of cables; route of channeling route; single line diagrams, schematic control input and output switches, load testing, materials list, Metric calculation, scope and description of equipment, equipment specifications (power transformers, UPS, battery charger rectifier, bar duct, low voltage power distribution, dry distribution transformers), Connection blueprints, List of Signals, blueprints of Grounding System and Protection against air discharge, area classification blueprints, electrical board diagrams, electrical equipment location and construction analysis.

Project: Assurance and Quality Control for the project: Basic Engineering and Details for Infrastructure and installations for early production (PT30 / 50) PETROINDEPENDENCIA.

Basic Engineering and Details: Review of the following documents and blueprints: calculations memory, list of cables; details blueprint on pipelines and connections; plumbing design, cargo studies, materials list, metric calculation, scope and description of goods, equipment specifications, connection drawings, control schemes, grounding System blueprints and protection against atmospheric discharge, area classification blueprints, electrical panel diagrams, interior and exterior Illumination designs as well as, flat diagram.

Project: Pumping System Evaluation P-126 A / F EF-ALTURITAS II PETROPERIJÁ

Detail Engineering: Calculations memory, list of cables; details designs on pipelines and connections; plumbing blueprints, load studies, materials list, metric calculations, equipment specifications, wiring drawings, control schemes, as well as grounding system calculation.

Project: Fire System Adaptation of the YAGUA Distribution Plant PDVSA.

Basic Engineering: Memory calculation, cable list, piping blueprint, load studies, materials list, metric calculations, equipment specifications, grounding system calculation.

Project: Engineering Details Measurement System at the Flow Station APP-21" PETROPERIJÁ.

Detail Engineering: Calculations memory, list of cables; details designs on pipelines and connections; plumbing blueprints, load studies, materials list, metric calculations, equipment specifications, wiring drawings, control schemes, as well as grounding system calculation.

Project: Basic Engineering and Detail Development Project OLEODUCTO RUBIALES MONTERREY- ODL-COLOMBIA.

Detail Engineering: Knowledge of Colombian regulations, calculations memory, list of cables; details designs on pipelines and connections; plumbing blueprints, load studies, materials list, metric calculations, equipment specifications, wiring drawings, control schemes, as well as grounding system calculation.

Project: Marine Terminal Modernization EL GUAMACHE –PDVSA.

Detail Engineering: Memory calculation, cable route table; blueprint details in pipelines and connections, facilities details drawings, Pipeline design, load studies list of materials, metric calculations, equipment specifications (power transformers, UPS, battery charger rectifier, bar duct, distribution centers of power in medium voltage and low voltage, dry distribution transformers), connection blueprints, calculation of grounding system, location of electrical equipment in substation.

Company: PCI Consulting Engineers

Position: Project Engineer (Since July 2009- February 2010)

Project: “Adaptation of the Industrial Complex SIDEROCA - PROACERO of PDVSA Industrial”.

Company: PDVSA

Position: Project Engineer (Since December 2006- June 2008)

Project: “Adaptation of Furnaces / Heaters to standards NFPA 85 and PDVSA K-337 "In the Tank Yards of: Lagunillas Norte y Sur.”.

Company: TIVENCA

Position: Project Engineer (Since November 2006- December 2006)

Project: "Expansion, remodeling and construction of new facilities of PDVSA INTEVEP".

Development of multidisciplinary engineering projects for PDVSA, coordinating and executing project activities in all design detail.

Company: S.T.M

Position: Coordinator (Since July 2006 - August 2006)

Project: "Coordination, logistics, planning and documentation of the work to be carried out in the plant stop POLINTER LINEAL 2006-Complejo El Tablazo and PRALCA.”

Company: SOLUCIONES TECNOLOGICAS C.A.

Position: Project Engineer (Since May 2005 - June 2006)

Project: "Installation, connection and commissioning of the access control system in CEMEX-MARACAIBO, INLACA, and SINCOR".

Development of multidisciplinary engineering projects for private company and SINCOR, coordinating and executing project activities in all design detail. Preparation of offers, metric calculations, equipment selection, procedure manuals.

personal management, logistics and materials procurement.

Company: INSTADATOS C.A.

Position: Project Engineer (Since September 2003 – April 2005)

Project: "BENTLEY NEVADA".

Project: “HAMACA”.

Development of multidisciplinary engineering projects for AMERIVEN, coordinating and executing project activities in all design detail.

Company: TECNOCONSULT ZULIA C.A.

Position: Project Engineer (Since November 2000 – January 2003)

Project: “Adaptation in the Substation of Pueblo Viejo Power Plant, to supply power to the new CNPC S / E-58 BA-1 Electrical Substation". ASSIGNED TO CHINA PETROLEUM COMPANY (CNPC)”.

Project: “Detail Engineering in the Flow Stations BA-32, 4-7, 7-7, 21-5”.

Project: “ASSURANCE MANAGEMENT OF THE PROCESSES (GSP) Updating of plans Facilities: Gas Platforms (La Salina Lago, Tía Juana Lago, Lake Bachaquero and Lago Lagunillas), Drilling of Soil Drilling PDV-22, L-601 drilling barges".

Project: “ASSURANCE MANAGEMENT OF THE PROCESSES (GSP) Upgrading of plans to 8 drilling machines "Drills: PDV-31 and PDV-36. GABARRAS: GP-19 and GP-21”.

Project: “Integral Construction Management (PDVSA)”.

Company: S.T.M

Position: Field Engineer (Since July 2000 – October 2000)

Project: " Plant Stop Fertilizers 2000 (PEQUIVEN EL TABLAZO)".

Construction assistance, involving all type of facilities.

Company: SUMYS DE VENEZUELA

Position: ProjectEngineer (Since January 1998 – January 2000)

Project: "Detailed engineering for DELTAVEN service stations". E/S Union Capacho. E/S The Clean. E/S San Benito. E/S The Summits. E/S San Onofre. E/S La Rosita. E/S La Inmaculada. E/S Oasis. E/S Stud. E/S Los Pedros”.

Project: "Basic Engineering of the Punta de Palma Substation of PDVSA".

Development of multidisciplinary engineering projects for private company and PDVSA, coordinating and executing project activities in all design phases.

Contact this candidate