Industrial Engineer Electrical Maintenance
Resume:
Barrett Jerod Coleman Sr.
Edgefield SC 29824
ad4t84@r.postjobfree.com
OBJECTIVE: To secure a position that will benefit both my employer and myself, by allowing me to contribute to your business and advance my professional skills.
WORK HISTORY:
Newsome Electric, Augusta, GA Feb 2022 – Nov 2023
Industrial Engineer
●Evaluate and improve existing industrial manufacturing methods.
●Develop new manufacturing methods and processes.
●Locate and research vendors and subcontractors to verify capabilities of meeting company needs and deadlines.
●Daily inspection of assigned company vehicles, tools, and equipment, performing electrical maintenance, and inventory approval for materials used to inspect, maintain, and repair street lighting systems to ensure conformance with the electrical and safety codes.
●Safe standard practices for installations, demolitions, as well as an understanding of terminal layouts, are necessary to continue to deliver professional service, along with tool, material, and vehicle management.
●NEC regulations as well as local regulations, a complete comprehension of Assembly blueprint material, and safe standard practices for installations.
●This assignment requires extensive knowledge of the current NEC as well as state and local regulations, and complete comprehension of blueprint and installation materials while allowing for undocumented changes and adaptation to meet local city standards.
Affordable Electric Company, Cocoa Beach FL Feb 2021 – Feb 2022
Service Technician
●The skilled labor staffing company mentioned below, issued a company vehicle, and assigned several new construction projects across the south FL area.
●Work with Maintenance, floor personnel, and management to determine manufacturing and scheduling requirements.
●Determine if process or manufacturing improvements are needed and make improvements quickly.
●These assignments require knowledge of the current Florida building codes and standards, NEC regulations as well as local regulations, a complete comprehension of Assembly blueprint material, and safe standard practices for installations.
●Basic duties include but are not limited to running conduit and pulling wire for branch, feeder, and underground circuits, device, fixture, panel, and transformer installations, as well as tool and material management.
Resource Acquisition Management Services, Deerfield Beach FL Jun 2019 – Feb 2021
Technician
●All projects are located in West Palm Beach, ranging from high-security military defense contractors including Martin Lockheed and Sikorsky to healthcare facilities including a remodel at Palm Beach Garden Medical Center and generator installation for the Lourdes Noreen McKeen Towers.
●These assignments require knowledge of the current Florida building codes and standards, NEC and local regulations, local health care and security standards, and safe standard practices for installations.
Florida Drawbridge Inc., Pompano Beach, FL Aug 2015 – Nov 2017
Electrical Engineer
●Daily inspection of assigned company vehicles, tools, and equipment, performing electrical maintenance, and inventory approval for materials used to inspect, maintain, and repair street lighting systems to ensure conformance with the electrical and safety codes.
●Compliance with FDOT MOT for scheduled and emergency roadway maintenance.
●One-hour response within West Palm Beach County, as needed to electrical emergencies, road closures, and incidents, available for rotations as needed.
Meadow Valley Electric, Ephrata, PA Jan 2013 – Jan 2015
Service tech/Electrician
●I was hired as a service tech, with Meadow Valley Security, the assignments included service and/or installations of systems or components fire alarms, security, CCTV, card access, A/V, and custom audio on new construction and restoration commercial and industrial sites, as well as quarterly and annual fire alarm and security equipment tests.
●These assignments require knowledge of the current NFPA regulations as well as local regulations, complete comprehension of blueprint material, safe standard practices for installations, and troubleshooting.
●Basic duties include but are not limited to "Lay-outs", comprehension of fire alarm and security conduits and devices, branch, and generator-backed circuits, device, fixture, panel, transformer, and battery installations and troubleshooting, service terminations, and tool and material management.
●Upon my completion of several projects, I was presented with the opportunity to be reassigned to the company's electrical division.
●My strong industrial electrical background led to my involvement in several scheduled "shutdowns" for maintenance, additions, and upgrades, new installation of production machinery in a sterile environment, a variety of service installations from 120VAC to 480VAC, and 24 to 120 VDC controls, service disconnects, as well service and upgrades to pre-existing accounts.
●Safe standard practices for installations, demolitions, as well as an understanding of terminal layouts, and low voltage controls are necessary to continue to deliver professional service, along with tool, material, and vehicle management.
Northern Electric Inc., Westminster, CO Feb 2012 – Jan 2013
Technician
●This project located in Savannah, GA was a new construction for the Gulfstream manufacturing division, designed industrial/commercial construction.
●Tasks include underground and overhead routing of various conduits for feeder, branch, emergency/generator backed, control, fire alarm, security circuits, and low voltage lighting controls.
●My ability to coordinate closely with the general contractors, local inspectors, as well as other trades, allowed me to complete challenging tasks correctly in a reasonable amount of time.
●This assignment requires extensive knowledge of the current NEC as well as state and local hurricane and seismic regulations, and complete comprehension of blueprint and installation materials while allowing for undocumented changes and adaptation to meet local city standards.
●Daily duties include but are not limited to accurate scaling, layouts, installation of conduit, conductors, panels, interior and exterior fixtures, and devices, effectively connecting distribution points, circuit and conduit tracing, identification, and labeling.
Southern Electrical Services, Nashville, TN Aug 2011 - Feb 2012
Technician
●This new construction project is located in Millen, GA for Corrective Corporations of America, designed with phases of high security institutional uninterruptible power supply systems.
●My leadership required effective communication with the Communications contractor, which led to that company offering me a position with their electrical division.
●Tasks include underground and overhead routing of various conduits for feeder, branch, ups, emergency and generator backed, control, fire alarm, security, and audio/visual circuits, as well as a complex grounding/bonding surge suppression system.
●Installation per specification of devices, fixtures, panels, switchgear, uninterruptible power supply components, gate, fence, door locks, and controls.
Gregory Electric, Aiken, SC Nov 2009 – Oct 2011
Technician
●These local assignments include an addition to an industrial site, service installations on new construction, and restoration of commercial sites.
●These assignments require knowledge of the current NEC regulations as well as local regulations, complete comprehension of blueprint material, safe standard practices for installations, and troubleshooting.
●Basic duties include but are not limited to“Lay-outs”, comprehension of fire alarm and security conduits and devices, branch, feeder, and generator-backed circuits, device, fixture, panel, transformer, and generator installations and troubleshooting, service terminations, and distributions, installing high-security power management and scheduled “shutdown” for maintenance, additions, and upgrades, new installation of production machinery in a sterile environment, a variety of service installations from 120VAC to 480VAC, and 24 to 120 VDC controls, new construction for water treatment facilities, as well service and upgrades to pre-existing accounts.
●Safe standard practices for installations, demolitions, as well as an understanding of terminal layouts, and low voltage controls are necessary to continue to deliver professional service. Basic duties include but are not limited to conduit bending, device installation, service terminations, power distributions, and tool and material management.
Pace Electric Company, Easley, SC Feb 2009 – Nov 2009
Technician
●This assignment is limited to the new service installation of the North Augusta Municipal Building.
●This location required the installation of underground conduit distribution of high voltage and generator-backed circuits outside the building, the distribution of high, low, generator-backed, isolated ground circuits, step-down transformers as well as A/V and data conduits.
●My ability to coordinate closely with the general contractors, local inspectors, as well as other trades, allowed me to complete challenging tasks correctly in a reasonable amount of time. Tool and material management are critical with the limited amount of work and storage space available.
●This assignment requires extensive knowledge of the current NEC as well as state and local regulations, and complete comprehension of blueprint and installation materials while allowing for undocumented changes and adaptation to meet local city standards.
●Daily duties include but are not limited to accurately scaling, layouts, and take-offs, installation of conduit, conductors, panels, interior and exterior fixtures, and devices, effectively connecting distribution points, circuit and conduit tracing, identification, and labeling.
●Special assignments include the installation of a GPS-controlled clock system, integrated with common photocells for the clock backlighting, an AC flag controller system, a lightning protection plan, and the layout and distribution of circuits and controls for a time-clock-controlled motion-sensing lighting system.
Carter Electric Company, Augusta, GA Jul 2005 - Jan 2009
Quality Inspector
●My ability to coordinate closely with the general contractors, local inspectors, as well as other trades, allowed me to complete challenging tasks correctly in a reasonable amount of time. Tool and material management are critical with the limited amount of work and storage space available.
●This assignment requires extensive knowledge of the current NEC as well as state and local regulations, and complete comprehension of blueprint and installation materials while allowing for undocumented changes and adaptation to meet local city standards.
●Daily duties include but are not limited to accurately scaling, layouts, and take-offs, installation of conduit, conductors, panels, interior and exterior fixtures, and devices, effectively connected distribution points, circuit and conduit tracing, identification, and labeling.
●My position includes both local and out-of-area assignments, requiring but not limited to service calls, maintenance, new service, and installations, on both commercial and industrial sites. These assignments require extensive knowledge of the current NEC regulations, complete comprehension of blueprint material, safe standard practices for installations, troubleshooting, and repair.
●Basic duties include but are not limited to conduit bending, raceway/wire tray construction, and tool and material management.
●My enrollment and completion of Augusta Technical College’s Electrical Maintenance Course allowed me to gain a stronger overall knowledge of the industry.
EDUCATION:
In 2017, I acquired an Advanced MOT Certification, and Tier 1 Illicit Discharge Detection and Elimination Training, both issued by the Florida Department of Transportation.
I completed the 10-hour Occupational Safety and Health Training Course in 2007. I have gained in-depth knowledge in areas including but not limited to Circuit Protection Devices, Industrial Power Distribution and Service, Industrial Lighting, Test Equipment, Safety Standards, Arc Flash, and Terms and Diagrams in a classroom environment as well as
hands-on experience.
In 2006 I completed Augusta Technical College's Electrical Maintenance Course. In 2007 I received the state of Georgia's Work Ready Certificate. This assessment system recognizes my skills in Applied Mathematics, Locating Information, and Reading for Information, which are required by various employers to finance my education in my field of work. I am a 2001 graduate of Strom Thurmond High School. I have completed several internship programs including but not limited to, direct marketing sales, martial arts instruction, and early childhood computer lab coordination.
Contact this candidate