**/**** **** #* **** Technician Certification

EPA

**/**** **** #* **** Technician Certification

EPA

**/**** ********* ** ************ Certificate

F.L.E.T.C.

**/**** ***- ***** *

C1-Trucking School

07/2020 - 02/2024 Maintenance Technician, Maintenance and Repair Workers, General Walmart Distribution Ctr, Greencastle, IN

Employment Type: Full Time (30 Hours or More)

I had to do general maintenance and take care of everything that broke down and fix as needed. I got hired for my HVAC certification working on all there RTU Units as they broke down and there Co-Ray Vac systems which was my main area besides doing other things as they broke down such as plumbing,electrical,working on conveyor belts and machines, also even doing electrical updates to building to add more things such as running conduit and wiring from electrical panels and installing J box's across entire shop and had to get licenses for everything to drive and work on such as a Scissor Lift, Genie Boom, Fork Lift, RR, RM, Carts and Buggies, Kabota Tractor, Kabota UTV, PE, PR, R5, C5, S5, SP, OC, TR, and Sweeper Scrubber. I was an all around maintenance mechanic that had to do a little of everything. I had to do PM's to there entire fleet of fork trucks and machinery as well.

DENNIS LEDCKE

5330 N 13TH HALF STREET, TERRE HAUTE, IN 47805

Phone: 812-***-****

Email: ad4b4d@r.postjobfree.com

Objective

Any full time position preferably on days. Ability Summary All around Mechanic, Trailer Mechanic, Tractor Mechanic, Auto Mechanic, Bowling Machine Mechanic, and I also know how to Weld, Torch, Grind, Rivet, and Fabricate pieces out of metal and have experience working on a Rail Yard. I also have Correctional Officer experience at a State and Federal Prison and Armed Security Guard experience at a Government contracted site which needed a Security Clearance. I also have experience as a Mental Health Technician as well. I have experience working on a very fast paced Production Floor and Manufacturing Assembly Line and have experience using a heat gun and needle pic on parts and running a trim press machine and water jet cutter on an assembly line and using a scrap machine as well. Also have a Type #1 and Type #2 HVAC Certification.

Ability Summary

All around Mechanic, Trailer Mechanic, Tractor Mechanic, Auto Mechanic, Bowling Machine Mechanic, and I also know how to Weld, Torch, Grind, Rivet, and Fabricate pieces out of metal and have experience working on a Rail Yard. I also have Correctional Officer experience at a State and Federal Prison and Armed Security Guard experience at a Government contracted site which needed a Security Clearance. I also have experience as a Mental Health Technician as well. I have experience working on a very fast paced Production Floor and Manufacturing Assembly Line and have experience using a heat gun and needle pic on parts and running a trim press machine and water jet cutter on an assembly line and using a scrap machine as well. Also have a Type #1 and Type #2 HVAC Certification. Occupational Licenses and Certificates

Honors and Activities

Employment History

02/2020 - 06/2020 HVAC Service Tech/Installer

Schalburg Heating and Cooling, Terre Haute, IN

Employment Type: Full Time (30 Hours or More)

As an Installer I installed new A/C units and new furnaces to new construction homes from the ground up and also was a Service Tech and did service calls as needed for residential homes and had to troubleshoot different components and fix and replace them with new parts as needed,

10/2019 - 12/2019 HVAC Service Tech (Heating, Ventilation, Air Condi, Heating, Air Conditioning, and Refrigeration Mechanics and Installers

Bay's Heating & Cooling, Terre Haute, IN

Employment Type: Full Time (30 Hours or More)

I installed AC Units, Evap Coils, and Furnaces in customers homes as they broke down and would tear out the old unit and replace with a new one. I also diagnosed and fixed the customers heating and cooling units with new parts as they broke down and installed new duct work as needed or repaired old duct work if it was damaged and worked on new construction installing returns and vents in floors with all new duct work from the ground up.

07/2019 - 10/2019 Senior HVAC Tech, Heating, Air Conditioning, and Refrigeration Mechanics and Installers

Medcalf Mechanical Heating and Cooling, Terre Haute, IN Employment Type: Full Time (30 Hours or More)

I installed AC Units, Evap Coils, and Furnaces in customers homes as they broke down and would tear out the old unit and replace with a new one. I also diagnosed and fixed the customers heating and cooling units with new parts as they broke down and had to work with the warranty companies to get the customers approved. I also installed and removed bad water heaters as well. I also installed new duct work as needed or repaired old duct work if it was damaged. 06/2016 - 06/2019 HVAC Tech/Plant Trailer Tech, Heating, Air Conditioning, and Refrigeration Mechanics and Installers

Crosspoint Power & Refrigeration, Indianapolis, IN Employment Type: Full Time (30 Hours or More)

My job duties consisted of installing, mounting, & wiring up Cool Trax GPS systems on Core Mark trailers as well as Star Trak GPS systems on Walmart trailers. Also installing, mounting, & wiring up front and rear stand-bye's and prepping them to be mounted on Walmart trailers. I also installed rear door switches on Walmart trailers. I also installed wireless door switches inside trailers and mounted, wired up, and programed on Sysco trailers & know how to wire up differently for several different evap set ups. Also Installed outside door switches as well & wired up, mounted, & programed on Core Mark trailers. I also know how to install & run the rear assembly cable & wire up, mount, & connect the rear remote display panel in several different trailers as well as the front display panel kit. I know how to prep several different types of trailers by installing & running the liquid lines, high & low voltage lines, & clamping them up in the trough before they get plumbed as well as closing them back up & installing trough covers after they are plumbed & putting up evap cages, fan shrouds, & installing drain tubes & thermal wires. I know how to troubleshoot and check wires with an OHM Meter to make sure they are working properly. I also know how to install & mount the battery box & tray on the Core Mark trailers & wire up the relay for the blower motor, & wire up the dome lights, cold chain, & light bar including the battery charger cable. I also know how to program the data pass system for the Walmart trailers & wire up, install, & mount the system to the trailer and install the fuel pass ring on the fuel cell & the anti-siphon on the fuel cell as well. I know how to wire up the FLS & door switch cables on several different trailers and wire up other navigation 3rd party systems as well. I know how to program the micro for several different types of trailers and set-ups and do pre-trips to make sure everything is working properly. I also have a Type #1 and Type #2 HVAC Certification for Refrigeration to plumb Trailers as well. 11/2015 - 06/2016 HVAC Tech/Trailer Mechanic, Bus and Truck Mechanics and Diesel Engine Specialists

TransTechs, Oak Brook, IL

Employment Type: Full Time (30 Hours or More)

My job duties consisted of installing, mounting, & wiring up Cool Trax GPS systems on Core Mark trailers as well as Star Trak GPS systems on Walmart trailers. Also installing, mounting, & wiring up front and rear stand-bye's and prepping them to be mounted on Walmart trailers. I also installed rear door switches on Walmart trailers. I also installed wireless door switches inside trailers and mounted, wired up, and programmed on Sysco trailers & know how to wire up differently for several different evap set ups. Also Installed outside door switches as well & wired up, mounted, & programmed on Core Mark trailers. I also know how to install & run the rear assembly cable & wire up, mount, & connect the rear remote display panel in several different trailers as well as the front display panel kit. I know how to prep several different types of trailers by installing & running the liquid lines, high & low voltage lines, & clamping them up in the trough before they get plumbed as well as closing them back up & installing trough covers after they are plumbed & putting up evap cages, fan shrouds, & installing drain tubes & thermal wires. I know how to troubleshoot and check wires with an OHM Meter to make sure they are working properly. I also know how to install & mount the battery box & tray on the Core Mark trailers & wire up the relay for the blower motor, & wire up the dome lights, cold chain, & light bar including the battery charger cable. I also know how to program the data pass system for the Walmart trailers & wire up, install, & mount the system to the trailer and install the fuel pass ring on the fuel cell & the anti-siphon on the fuel cell as well. I know how to wire up the FLS & door switch cables on several different trailers and wire up into other navigation 3rd party systems as well. I know how to program the micro for several different types of trailers and set ups and do pre-trips to make sure everything is working properly.

08/2015 - 09/2015 Assembly- Headliners, Assemblers and Fabricators, All Other SMX / Heartland, Greencastle, IN

Employment Type: Full Time (30 Hours or More)

My job duties consisted of making headliners for different vehicles using a water jet mold cutter and a trimming stamp machine on an assembly line and pulling the headliners of the machines and using a heat gun and needle pic to fix problems on them as they appeared and placing on a rack and running a scrap machine. 06/2015 - 07/2015 Mental Health Technician (MHT), Psychiatric Technicians Gibault Inc, Terre Haute, IN

Employment Type: Full Time (30 Hours or More)

I supervised kids of all ages and made sure they did what they were supposed to do throughout the day with the least amount of behaviors as possible. I brought them to different recreational activities they had planned throughout the day as well as to breakfast, lunch, and dinner and watched for behaviors. I also supervised them as they all went to sleep on overnights and made sure they were in there rooms sleeping and breathing as well on numerous safety check throughout the night. 01/2012 - 05/2015 Car Assembly Builder, Assemblers and Fabricators, All Other Aerotek/Toyota TMMI, Princeton, IN

Employment Type: Full Time (30 Hours or More)

I built Toyota Highlanders and Sequoias putting different parts on each one as y g q p g p

they came down an assembly line. I had to use a lot of different air tools and torque wrenches to be in specs and impacts guns to put all the different parts on the vehicle in a timely manner as the cars drove off the line. 05/2009 - 05/2010 Correctional Officer, Correctional Officers and Jailers U.S. Department of Justice Federal Bureau of Prisons, Terre Haute, IN Employment Type: Full Time (30 Hours or More)

My duties consist of supervising inmates and responding to emergency situations when needed, Also hand cuffing and shackling the inmates and moving the inmates in a safe and secure manner while protecting the public from harm, threat, or escape. I attended Federal Law Enforcement Academy and passed! I have been in a lot of emergency response situations where my assistance was needed and have been involved in numerous cell extractions. 11/2007 - 10/2008 Armed Security Guard, Security Guards Mason And Hanger And U.S. Government, Newport, IN

Employment Type: Full Time (30 Hours or More)

Training in Gate Operations, Escort Functions, Night Vision Devices, Search and Seizure, use of Force, Reasons for Detainment, National Incident Management Systems (NIMS) Compliance, Recovery Operations, Site Defense Plan, Command and Control Terrorism, Response to Chemical Accidents, Response Force Deployment, Tactical Movements, Cordon Operations, Airborne Assaults, Rules of Engagement, Bomb Threat, OPSEC, First Aid, Location and use of Fire Equipment, Standards of Conduct, Intrusion Detection Systems (IDS), Weekly Response Exercises/ Mini CAIRA'S, Combat Small Unit Tactics, Weapons Training - Qualifications on 12 GA./ Fam Fire / NBC / Night Fire / M-16 / 9MM, Interrogation Procedures, Transportation Security, Chemical Restricted Area Duties, Proficiency Testing, and an Annual PT Testing every 6 months. I also possess a United States Government Clearance with an extensive background check. 02/2004 - 07/2007 Correctional Officer, Correctional Officers and Jailers Putnamville State Prison, Greencastle, IN

Employment Type: Full Time (30 Hours or More)

I Supervised 172 Inmates In An Open Dorm Facility As A Dorm Officer, Performed Cell Extractions, Maintained Key Control, Gate Operations, Weapons Qualifications On Shotgun/M-16/Cn Canister, Performed Shake Downs Of Dorms, Pat And Strip Search Offender, Performed Duties As A Street Officer, Motor Patrol, Tower Officer, Gate Officer/Checkpoint Officer, Broke Up Fights, Experience In Handcuffing And Shackling Inmates, Also Transporting Inmates. 02/2002 - 07/2003 Mobile Trailer Repair Mechanic, Tire Repairers and Changers J.B Hunt Trucking Company, Chicago, IL

Employment Type: Full Time (30 Hours or More)

I Changed Tires On Trucks & Trailers, Also Repaired & Mounted Truck Tires On Rims & Balanced Them On A Machine, Repaired Trailer Bolster Plates, Lights, Twist Locks & landing Gear With A Torch & A Stick Welder, Fixed Electrical Components, Performed AA Inspections, Greased, Lubed, & Adjusted Brakes, Also Repaired Air Hoses on Chassis, And Primed And Painted When I Was Done. 11/2000 - 02/2002 Bowling machine Mechanic, Maintenance and Repair Workers, General Stardust Bowling Alley, Scherriville, IN

Employment Type: Full Time (30 Hours or More)

Repaired Bowling Machines As They Broke Down And Cleaned And Oiled Lanes Every Night.

10/1998 - 11/2000 Telemarketer, Telemarketers

Americall Corporation, Scherriville, IN

Employment Type: Full Time (30 Hours or More)

Spoke To People All Over The World Selling Them Life Insurance And Filling Out Credit Card Applications.

Federal Law Enforcement Academy

Vocational School Certificate or Other Post-Secondary Certificate Federal Law Enforcement Training Center, Glynco, GA Truck Driving Vocational School

Vocational School Certificate or Other Post-Secondary Certificate C-1 Truck Driving School, Indianapolis, IN

Core 40

High School Diploma

Lake Central High School U.S., St. John, IN

I Have Typing And Computer Skills In Microsoft Word, Microsoft Office, Etc., Leadership Skills, Security Officer Skills, Correctional Officer Skills, All Around Mechanic Skills, And I Am A Very Good Hands On learner And Pick Up On Things Very Easy When Shown For The First Time, and have attended Federal Law Enforcement Academy and passed.

Education and Training

Additional Information

Detailed References

Sam Pearison, Maintenance

Sullivan Housing Authority

100 Parkview Terrace

Sullivan, IN 47882

812-***-****

Rena Alward, Church Cleaner

Otterbein Church

2038 South 500 East

Rockville, IN 47872

765-***-****

Lauren Zellars, Tax Professional

H&R Block

516 West Washington

Sullivan, IN 47882

812-***-****

Destiny Walker, Call Center Representative

First Bank

125 Gilbert Avenue Apartment A

Terre Haute, IN 47807

812-***-****

Contact this candidate