OSCAR VILLALOBOS

*** ******** ***. **** ****,CA *4014· *650-***-****

ad44zc@r.postjobfree.com

Objective: To obtain a work position as Estimator/Civil Engineer/Project Engineer

EXPERIENCE

Dates From – To: (Temporary Work) August 2021

Estimator, Grizzly Builders,Inc:

The work completed for this general contractor consisted of a Steel Estimate for a Double Span- Two Story Moment Frame.

The Estimate was done on a Dollar per Pound Unit on an Excel Spreadsheet for this Single Project.

Dates From – To: September 2018 – September 2019

Estimator, West Cork Welding,Inc:

- Working for this company consisted of making Structural Steel Estimates for Request for Proposals from General Contractors.

- The Estimates were brought about from a set of Structural and Architectural Blueprints from which Steel Components are sorted out and priced according to a Price per Pound Standard.

- The Software used was EXCEL and the tabulation was made to Sum up all the Steel that is found in the Structural Drawings from a Building Project.

- The Quantity Take Off Price range of the Steel ranged from $1000 for simple Structural Steel Components (brackets, plates, or railing work) to more elaborate $500000 work for Multi-Story Residential and Commercial Structures.

- I was responsible for preparing the Proposals that summed up the Contract Agreement that was between the Sub-Contractor and General Contractor. The Proposals were used as the tool to Bid for Structural Residential Steel Projects.

- The Bid open forum was the Company email system where RFP’s were sent and answered in a timely manner with a Proposal. The Proposal was a manner of documenting all the Steel needed in the Project at a Price. The Proposals included The Inclusions and Exclusions that the Sub- Contractor wants in the Contract Agreement for Price,Material & Installation purposes.

-At West Cork Welding,Inc I was also responsible for the Scheduling of the Installation of Steel Material. The Crew consisted of a 15 man crew that did the Welding On- Site of Projects granted to the Steel Sub-Conractor from the RFP’s. The software used was an EXCEL template that was organized on a Day to Day basis under supervision of the Project Manager.

-I participated in making Change Orders to meet improvised On –Site conditions that surrounded the Construction and Installation Procedure for Steel &Welding.

- I helped coordinate for Inspection Services to meet the Welding Standards for Structural Elements such as Yard & On Site Moment Frames and Customized Welded Elements.

- I participated in doing Sales Quotes for Steel Material and answering emails regarding questions that surrounded the Take- Offs to the Construction Schedule.

Dates From – To: (Temporary work position) June 2017 – July 2017

DRAFTER, CHU DESIGN AND ENGINEERING,INC:

-Work for this period consisted of structural drawings that had to be included in the structural calculations package that provided for the structural design, renovation, or seismic retrofit of low rise buildings in the Peninsula Area.

-Work was done on AutoCad software to provide as a tool to complete a more presentable presentation to give clients a holistic view of a structural perspective

DATES FROM – TO: (TEMPORARY WORK POSITION) JANUARY 2014-FEBRUARY 2014

PROJECT ENGINEER,BL BUILDERS, INC.

-Work included of residential contracting services with construction that is typical of the San Francisco City limits structural Engineering services were made to architectural clients to provide for preliminary reports.

-Typical Duties include: Design and analysis of beam and posts,with structural software. Design of structural drawings to provide preliminary report to architectural clients. Building inspections for construction standards to be met.

DATES FROM – TO: JANUARY 2007-JUNE 2008

PROJECT ENGINEER,CHU DESIGN AND ENGINEERING, INC.

-Most of work included and revolved residential structural engineering services that is more typical to the residential housing within San Mateo county. Most of residential housing was that of Low Rise building (4 Stories and below) with work common with more elaborate one to two story residential type of housing.

-Typical duties include: Design and analysis of Low Rise buildings. All of design consisted of bearing wall type of residential structures.

-Design, analysis and evaluation of lateral force resisting systems to complete a though rough seismic retrofit. This completes a calculations structural engineering package report and maintenance of structural integrity. Utilize blueprint reading skills to discern different types of projects.

-Analyze of blueprints for tributary length to be seen and making shear-bending moment diagrams.

-Use of Beamcheck2005 software to make structural calculations (improvisation if necessary) Most of scope of work includes the preparation of a structural engineering calculation package that includes: Design, analysis and evaluation of:

-Dead and live load calculation sheet.

-A lateral force resisting system for residential housing.

- Drafting of such lateral force resisting system (LFRS).

-Structural Engineering calculations using Beam Check2005 software.

-Foundation calculations to support dead, live, lateral loads.

DATES FROM – TO: JANUARY 2006

PROJECT ENGINEER,CSG CONSULTANTS, INC

-Work with this firm included an introduction to the field of plan check engineering.

- This firm provided me with an environment of an introduction to the CBC vol. I architectural portion of the California Building Code.

-Typical duties include: The application of building code principles from an introductory list to gain familiarity with the CBC Vol. I from architectural and engineering blueprints.

-Having time reading various portions of the CBC Vol.I Duties also includes dexterity in blueprint reading to architecture and engineering more typical in the San Mateo peninsul

DATES FROM – TO: JULY2005-DECEMBER 2005

PROJECT ENGINEER,SIA CONSULTING, INC _

-Most of work included and revolved of residential structural engineering services that is typical to the residential housing within the San Francisco City limits. Most of residential housing work was that of Low Rise buildings (4 Stories and below) with multistory residential work being the most common.

-Typical Duties include: Design and analysis of Low Rise Buildings. Design work is specific to bearing wall systems.

-Analysis includes the use of Static Lateral Analysis to design a Lateral Resisting System both seismic design and upgrade. Moment frames to support horizontal members when overturning loads are too high.

-Analyzing blueprints for tributary lengths to be seen and making shear bending moment diagrams. Using Enerclac to make structural calculations. Along with a foundation calculations this completes a structural package report.

-Have experience with private work field inspections and with limited communication with private contractors. Introduction to the workplace environment a residential structural engineering company provides services for regards to a private contractor to design a residential project.

EDUCATION

January 2009 - January 2011

Graduate Program, San Francisco State University

Classes taken:

ENGR432: FInite Element Methods:

This class consists of spring force relationship between the stress and strain in solids. The equations are parametric which take into account both local and global coordinates to measure the linear relationship between the stress and strain. The bodily solids include beams, trusses and plane plates. Finite elements measures the solid difference in stress and strain along the body.

ENGR 832: Structural Design for Earthquakes:

This class consists of an original project that consists of a high rise with seismic considerations. The lateral resisting system was designed by calculating the loads using software and designing lateral systems for shear demands. Types of lateral systems include the x-brace and chevron brace under code regulations.

ENGR 461: Mechanical Vibrations:

This class consisted of the analysis of vibratory motion. Examples of vibratory motion include free vibrations, simple harmonic motion,and forced vibrations. All of these examples included damping phenomena with all analysis standards. Examples include single degree of freedom and two degrees of freedom examples.

SPRING 2004

BACHELOR OF SCIENCE IN CIVIL ENGINEERING, San FRancisco State University

Certification

Obtained the Engineer-in-Training certificate as of January 2005

Computer Skills:

Experience in use of Microsoft Word,Excel,PowerPoint,Risa2D,Risa3D. Beamcheck2005. Enercalc. ClarisCad. Autocad2005. Procore Cloud. MathCAD. Google Drive. Introduction to Steel Structural and Reinforced Concrete Structural Software. Some experience in programming.

Languages:

Fluent in English and Spanish

ACTIVITIES

Volunteer Work:

Habitat for Humanity: Spring 2015

This type of work consisted of clean up work around recreational areas of the Bayview Hunters Point region.

Habitat for Humanity: Spring 2013

The work consisted of the placement of drywall over partitions and shearwalls. The drywall was a preparation for the interior design of a condominium complex

Habitat for Humanity: Spring 2012

The work for Habitat consisted of building of roof exterior by the use roof shingles tiles. The shingles were of tongue and groove over three layers above the roof plywood. The roof consisted of valleys, hips and ridges of a condominium complex.

Contact this candidate