OBJECTIVE
My goal is to become associated with a company where I can utilize my skills and gain further experience while enhancing the company’s productivity and reputation.
SUMMARY
Experienced manufacturing and assembly production team lead with over 30 years’ experience in aerospace and defense electronics systems assembly. Major projects experience includes air and ground radar communication systems for commercial, state & local agency and department of defense (DoD) contracts. Experience in the areas of Manufacturing Procedures, Testing, Prototype Engineering, Aerospace Products, Radar Systems, and Military Defense Equipment. Lead a small team in all aspects of the Manufacturing Floor. Conducted on call troubleshooting in support of Lean Six Sigma.
CORE STRENGTHS AND PROFESSIONAL PROFILE
Project Leadership
Assemble to order planning
Strategic Planning
Technically qualified in specialized electronics assembly
Identification friend or foe (IFF) radar systems
Imaging radar systems
Fiber Optic Connector Assembly-C130- Aircraft
Chassis Wirer
Micro Assembly
Read & interpret drawings and specifications
Die Binder for mass production
Wedge Bonding
Hybrid Building
Electronic Components Assembly
Class A Solder
High skilled level prototype wirer
Electrical Assembly of Coaxial Connectors- C130-Aircraft
Crimping of Copalum Termination-C130- Aircraft
Solder Sleeve Assembly-C130-Aircraft
Crimping Terminals and Splices 10 and Smaller-C130-Aircraft
10 Step Soldering Process-Stanley Associate
Ki Connector Certification –Stanley Associate
Lean Six Sigma Yellow belt –Stanley Associate
Electronic Inspector
Mechanical Assembling
Wire/Cable prep and installation
Tack Welding
Unit Testing
Wire Harness Fabrication Technician
Quadax Termination and Assembly-C130- Aircraft
Education
Island Drafting & Technical Institute, Amityville, New York
Associate of Science / Electronics and Computer Service Technology - May 1983
Certifications
IPC/WHMA- A-610 – PC Boards & Components Assembly IPC/WHMA-A-620 – Wire Harness Assembly
Electrical Mechanical Assembler Certifications-IPC J-STD-001, IPC-610, ISO 9000-2000, AS9100-2004, IPC-7711/IPC-7721
Work Experience.
WIOSS Atlanta,Forest park GA –2022-2023 Electrical Maintenance-All repairs to distribution center repair Roller Conveyor, Tray Crane repair,controller repair,Flat Conveyor repair LFS repair AC,DC motor repair and VC conveyor repair Link conveyor repair pallet crane repair Tevis knowledge and I have knowledge of working in Automated distribution center distribution
L3 Harris,Alpharetta Georgia
Tech Engineer February 2020 – June 2022
All type of electrical task including wiring, soldering, harness making, chassis wiring, PCB repair
Building radar systems
Mechanic assembly of components
Soldering under microscope
Delta Flight Products, Atlanta GA
Harness Fabrication Technician September 2018 – November 2019
Under the direction of Production management, the Electrical Fabrication Technician fabricates Electrical harnesses and assemblies and installs wiring used in the assembly and integration of aircraft parts and assemblies in accordance with Design Engineering instructions.
Manufactures wiring harnesses and electrical assemblies with single or multiple breakout points as well as single or multiple termination points according to all applicable regulations and instructions including, FAR regulations as well as Delta, Boeing, and Airbus process and material specs.
.
Operates Laser wire marker and printers to direct or indirectly mark electrical wiring, wiring harnesses and electrical assemblies.
Installs wiring into interior monuments such as lavatories, galleys, and class dividers for aircraft installation.
Uses precision tools, power supplies and test equipment to measure and perform operational testing of electrical harnesses and assemblies.
Reads and interprets wiring diagrams, engineering drawings, Test plans and work instructions.
Works with energized AC and DC circuits according to all safety requirements
Maintains traceability of all materials used during manufacturing and properly fills out paperwork to ensure compliance with all inspection and FAA requirements.
Maintains equipment by completing instructed preventive maintenance requirements, following manufacturer's and DFP instructions. Troubleshooting malfunctions and reporting to management for equipment repairs.
Lockheed Martin Aeronautics Corp, Marietta GA
Electrical and Electronic Fabrication Technician September 2016 – May 2018
Making aircraft electrical and Electronics wiring systems, fiber optic cables and equipment installations during early production operation and to incorporate subsequent design changes, including
Making continuity checks of complete electrical and Electronics wiring systems, Determining WORK OPERATION SEQUENCES, making necessary layouts, and wiring and Assembling complex aircraft electrical, radio, instrument, and control panels, consoles, and junction boxes during early production stages and incorporating subsequent design changes therein, and servicing, overhauling, and functional-testing aircraft STARTER-GENERATORS, motors, inverters, and other controlling-actuation electrical and Electro Mechanical power units and accessories.
Telephonics Corporate, Huntington, NY
Lead Class A Prototype Wirier Technician August 2000 – April 2015
Supervised 8 employees
Responsibilities in the development of prototype printed circuit assemblies, wiring harnesses, and cables including multi-layer through hole boards and surface mount technology.
Experienced in the manufacturing of boards.
Form engineering drawings, developing experimental layouts, and troubleshooting and repairing non-functional boards Cuts, jumpers and component changes.
Proven record of solving manufacturing problems, and establishing rework procedures
Build chassis from assembly drawings, from start to finish completion ready to be shipped, I’m a lead person prototype.
General Microwave Corporate, Farmingdale, NY
Assembly Technician January 1998 – July 2000
Surface Mount
Wirier Bonding
Wedge Bonding
Hybrid Builder
High Frequency Assembler
Spellman High Voltage, Hauppauge, NY
Electrical Mechanical Assembler May 1996 – December 1998
Daily assembly of racks, chassis, and top assemblies through hard wiring, crimping and mechanical component knowledge
Aided other assemblers as required
Manufactured instruction operation sheets, BOM's and ECN's with minimal to no aid of lead or supervisor.
Fill out any associated paperwork such as configuration control travelers
Trained other assemblers as required
Miteq, Hauppauge, NY
Micro Assembler January 1994 – April 1996
Prepared substrates for micro assembly; includes tinning, cleaning, inspection, and testing of substrates, and brazing and soldering substrates to carrier.
Learned to perform any of the basic functions of a micro assembler: die bonding, wire bonding, ball bonding or die attach by hand under a microscope as well as wiring and testing shorts.
Comprehend detailed instructions using visual aids, drawings, and verbal and written instructions to assemble, rework, or reassemble units in a manner acceptable to Quality 883 Standards.
Adjusted settings on bonding machines and gap welder with supervision.
Read and interpret assembly print and Bills of Material (BOM) and recognize components by their designation.
Work Force Ltd., Hauppauge, NY
Inspector; Assembly July 1987 – December 1994
Responsibilities and core task include:
oSurface Mount
oWirer Bonder
oWedge Bonding
oHybrid Builder
oHigh Frequency Assembler
oElectronic Assembler
oMechanical Assembler
oUnit Tester
oClass A Solder
oCable prep
oCable Installer
oMicro Assembler
Norsal Industries, Hauppauge, NY
Assembly Technician September 1985 – June 1987
Responsibilities and core task include:
oWirer Bonder
oWedge Bonding
oDye Bonding
oHybrid Builder
Todd Products, Brentwood, NY
Assembly Technician September 1980 – August 1985
Responsibility and core task include:
oMicro Assembler
oSurface Mount Assembler
oElectronic Inspector
oHarness Maker
o Chassis Wirier
oHybrid Builder
oHigh Frequency Assembler
oElectronic Assembler