Post Job Free

Resume

Sign in

Ground Up Power Generation

Location:
Sacramento, CA
Posted:
February 13, 2024

Contact this candidate

Resume:

Rob Guillory

858-***-****

ad3lp1@r.postjobfree.com

Apprentice electrician with experience in power generation - industrial - commercial - underground - residential - ground-up installations - generator installs, underground electrical and enclosure piping. Displays ability to meet electrical code and inspection requirements. Eager willingness to learn. Motivated team contributing attitude. Confidence completing extreme tasks and meeting deadlines under difficult conditions. Dependable, loyal, strong efficient aptitude in learning and coaches effectively in detail. Promising work ethic with no supervision needed.

CERTIFICATE/LICENSE

Cummins FSPG Training Certificate: ATS/OTEC/OTPC 05/2023

Cummins FSPG Training Certificate: AC Alternators 02/2023

Cummins Diesel Engines Certificate: Midrange Engines 05/2022

Institute of Business & Technology Certificate: HVAC 04/2023 EPA: 967*********

Institute of Business & Technology Certificate: Electrician 05/2023 ET #: T50369

CAL OSHA 30 Construction Certificate: OSHA 30 01/2018 SN #: 23801791

Kohler Power Systems Certificate: Residential 07/2014

Generac Power Systems Certificate: Residential 04/2014

Elk Grove High School Certificate: Diploma 06/2004

EMPLOYMENT

Rex Moore 09/2023 – Currently Employed

Electrician

Amazon building - large/ground up - site crew (underground) job lead

Attend meetings with foreman/s - pass along information to team of 8 guys as instructed every morning - (Monday – Saturday)

Supervising team when foreman is absent keeping constant productivity

Inspect all sonotube and h-frame setups for parking lot/street lighting - lead concrete pours for all street lights on site

Direct/guide cement truck drivers and coordinate instruction on concrete vibration

Inspected and cleaned all trenches before installing pvc pipe

Successful walk-through with city inspector for 4” pipe install for fiber auto license plate readers

Passed inspection for over 40 electric vehicle charger installs

Installed all christy boxes, set and painted all markers for piping

Installed piping for lighting protection

Guided and used skid steer for back fill and compaction

Drive semi-truck with water buffalo and fill with water daily

Provide water for team throughout the day

Fuel up buggy (all-terrain vehicle) - Semi truck - Ditch witch trencher with diesel fuel

Fill all gas tanks for trench compactors/jumping jacks and water buffalo

Currently on high/low volt wire pulls for panels, j boxes for truck block heaters at dock levelers, outlets and exit signs

Labeling all panels, pipes and their conductors with circuit numbers and laying out crew per task

Electro-Motion Inc. 05/2023 – 09/2023

Senior Field Service Power Generation Tech

Help supporting team

On call rotation

Diagnosis of mechanical and electrical issues

Quarterly inspections

Annual services – collect coolant/fuel/oil samples

Fire pump service and maintenance

Perform 1 – 4hr Load Tests up to 2500 KVA

Valve adjustments

Minor overhaul

Battery charger installs

Transfer switch maintenance - open/closed/bypass arc chute cleaning

Functional Load Tests

Maintain clean company vehicle while keeping clean driving record

Cummins Pacific Sales & Service 08/2021 – 05/2023

Diesel Engine Tech / Field Service Power Generation Tech

Support team for production purposes

Complete daily inspections during intake/diagnosis and triage

Carefully plan and set safety guidelines before work

Perform preventive and corrective maintenance and service work

Perform calibrations on ecm per warranty procedures

Diagnose and troubleshoot fault codes per quickserve instructions

Aftertreatment maintenance (replacement of dpf and scr assemblies dosing valves and controllers)

Removal/Install of overhead set, valve/injector cam, rings, rod and caps, crank, bearings and caps (engine overhaul)

Perform routine inspections, annual service and load tests on 7KW – 2000KW gensets

Navigate through logic controllers and set input and output parameters

Automatic transfer switch maintenance

Removal/Install alternators and terminations

Maintain clean organized service vehicle with clean driving record

Canzam Electric 07/2020 - 07/2021

Electrician / Apprentice Trainer

Read all blueprints and study all methods of install in code book before jobs

Relocation of electrical systems

Cover scope of work during job walk with owner

Complete lighting and switch upgrades

Underground pvc and vault installs

Complete panel upgrades and terminate wiring at lugs and breakers

Run - 4” emt and - 4” rigid conduit pipe.

Lay out team per owners instruction

Trained electrical apprentice for 8 months to journey level

Panel commissioning and decommissioning

Demolition

Water controller upgrades for Cal Water

Generator set installs and wiring of switchgear and scada for Cal Water

Troubleshooting electrical systems

Transformer upgrades at street light pole fixture

Dynamic Generator Service 06/2020 – 07/2020

Railroad Electrician / Generator Mechanic

Install panels for PLC and terminate wiring

Thread and run rigid pipe for upgrades on rail project

Commission panels

Underground work and christi box installs

Generator service calls

Support team on railroad pulling cable

Tesla Fremont Factory 02/2020 – 06/2020

Facilities Electrician

Perform routine commercial and industrial electrical work

Complete inspections and hot work permits before jobs

Troubleshoot a/c and d/c electrical systems

Panel upgrades and commissioning

Decommission and demo of electrical systems

Cable tray installs

Thermal image readings

Lighting switches and outlets

Control wiring

Powerline demo and wiring installs

New Age Electric 01/2019 – 01/2020

Commercial Electrician

Ran crew for over $4 million, 3 story condo project in Menlo Park

Ground up build from pg&e vault to switchgear that me and my foreman installed

Carefully read blueprints and built electrical room to code and passed city inspection

Trained foremen on rigid pipe bending machine and emt flip top bender

Piped in elevator call stations

Pulled all circuits from electrical room to all devices and lighting

Piped in planter boxes and outside lighting for concrete surrounding wall

Piped in and wired emergency power off for building and generator

Piped and wired in all disconnects for a/c units

Installed and supported all cctv and fire alarm junction, pull boxes and pipe

Piped in all feeders for ev charge stations

Ran all pipe for solar panels on roof to electrical room

Transformer installs, suspended installs and wiring

Wiring of all switchgear and panel everyfloor

Manage the concrete poor on 3rd floor for condos to protect all electrical equipment

Lehigh/Hanson Cement Quarry 07/2018 – 01/2019

Industrial Electrician Local 332

Corrective and preventive maintenance performed on electrical equipment

Monitoring and repair or replacing solenoids for bag house

Replacing bulbs and transformers on light poles surrounding property

Operate air switches during detonations of the mining quarry

Monitor and reset switchgear and breakers during production

Lockout equipment during shut downs for mechanics on site

Daily rack in/out of magnetic breakers for production

Monitor and upgrade kiln sensors and cameras

Monitoring and annual maintenance of substation equipment

Replacement of fuses and relays in electrical equipment

Calibrating chain drag and conveyor belt zero speed sensors

Rigid conduit threading and installs for lights and outdoor electrical

Control wiring of starter buckets in mcc rooms

Manipulation of conductors and terminating panels

Monitoring plc parameters for ammonia sensors

Monitoring vfd’s and controllers above silos

Impedance testing 1200hp motors and maintaining upkeep

Tradesmen International Temp Agency 09/2017 – 07/2018

Apprentice Electrician

Temp electrician performing general residential and commercial electrical work

Benchmark Precision Technologies 05/2017 – 09/2017

Building Maintenance

Complete work orders in timely manor

Support production team fixing all equipment in building

Move office furniture and upgrades in offices

Troubleshoot electrical on cnc machines and robots

Complete annual services

Support production team by running lathe and mills at night

Aerotek Temp Agency 05/2016 – 05/2017

Facilities Maintenance

Complete work orders in timely manor

Support production team fixing all equipment in building

Move office furniture and upgrades in offices

Troubleshoot electrical on cnc machines

Complete annual services

Monitor and clean conveyors during shut down

Bay City Electric Works 02/2015 – 05/2016

Power Generation Technician

Performed routine services on various equipment

Oil, filter and fuel filter changes

Coolant, oil and fuel samples collected

Routine loadbanks/tests on various equipment

On call for refueling runs and transfer switch issues

Routine ATS maintenance

Replacement of parts and complete repairs

Installing alternators and wiring

Phase rotation testing and monitoring

Load shed equipment troubleshooting

Set up for mobile rentals

Perform start-ups and load test when requested

Practiced customer service excellence

Melton Electric 07/2014 – 11/2014

Electrician Apprentice

Temp electrician hired to support the build of an IMAX theater

Sound system wiring and wire pulls and lighting box make up

BBH Consulting INC. 09/2011 – 06/2013

Generator Mechanic

Supported Ft. Bragg Army Base Generator Reset Operations

Complete rebuild of damaged genset trailers from the war

Sanding, painting and repairing of mechanical parts

Solder wires and heat shrink - terminate at contactors

URS 03/2011 – 07/2011

Heavy Equipment Mechanic

Support Camp Lejeune Marine Corps Base Operations

Performed corrective and preventive maintenance on military vehicles

Performed routine inspections and completed work orders

Repaired and replaced parts on hmmwv, 7 ton, lvs and lvs-r

Repair and replace parts on sky track terex, kalmar iso container hauler

and john deere tram bucket loader

AECOM 07/2010 – 03/2011

Heavy Equipment Mechanic

Support Camp Lejeune Marine Corps Base Operations

Performed corrective and preventive maintenance on military vehicles

Performed routine inspections and completed work orders

Repaired and replaced parts on hmmwv, 7 ton, lvs and lvs-r

Repair and replace parts on sky track terex, kalmar iso container hauler

and john deere tram bucket loader

MARINE CORPS 2004 - 2008

Light Infantry 60mm Gunner - HONORABLE DISCHARGE



Contact this candidate