Timothy Paschall

Skilled and broad experienced production asset for hire.

Princeton, MN

ad3l7c@r.postjobfree.com

+1-320-***-****

Seeking a challenge or a bigger paycheck in a floor or leadership position, 18 yrs of production experience. I can do task and do so at the top level often learning a position in less time than most consistently. Running out of ladder to climb would make younger me restless. This gave me a great deal of experience in everything. I mean everything. From u.s. infantryman in Georgia to sea food processor in the eastern aluetian Islands Alaska. Class 6 woodworker in mn to timepiece mechanic in Texas. And more than I care to write or you care to read. I see the path to the answer quickly and move there efficiently; leading by example or even friendly rivalry to elevate moral, and in turn production. I believe negative attitudes in the workplace and low moral to be extremely contagious and will damage the over all effectiveness of a crew and drive productivity into the ground. Hence, I generally work to enjoy what I do, making our work a point of pride; as happy employees are just going to take care of buisness better than those who never invest themselves in the common goal. Thus will not likley see the fruis of their labor. So that is what I do. How did you ever live without me? Willing to relocate: Anywhere

Authorized to work in the US for any employer

Work Experience

Laborer/Construction Worker

Sub-Contracting - Metro mn

September 2022 to April 2023

Pretty much anything a customer needs done to their homes or businesses from New heating systems, restorations after damage from floods, fires ect, windows, decks, small gigs never the same twice. Then there is the new builds from the ground up, some times framing houses; sometimes pole barns. Insulation and siding to old buildings, in Alaska I did much of the same type of work. For a short time I did seemless gutters as well. All this experience makes me very well rounded while I couldn't say I have years in any single area of construction, I certainly feel experienced enough in most trade work that feel comfortable joining any crew doing any specific skilled crew. I'm not going to be green no matter what the job. Heavy Machinery Operator

Ruan via vision staffing - Saint Cloud, MN

April 2022 to June 2022

This was a temporary position where bobcat had a huge number of skidsteers, and toolcats still being built but with covid there was a shortage of the hubs that act essentially as the brain of the machine. Around 6k bobcats had to be stored in a 1million Sq ft facility until they could have the missing parts installed. Trucks delivered them 6-8 at a time and my job was to unload them, drive them to the correct spot in the massive building, document the correct location, and what ever needs said machine had in order to be ready to ship out to dealer. I loved this job so I took it apon myself to learn every step of the process from receiving to shipping out. I Learned how to Install all of the parts, how to calibrate the computer to drive properly. How to pick orders for shipping, and loading trailers both in closed and flatbed trailers. We worked ourselves out a job here and we were no longer needed a month ahead of schedule but the things I learned are for more valuable than a few checks. While I've been running skidsteers since I was small child, here I learned the maintenance side of the machine so now I'm a double threat with these machines.

Pressman

ECM Publishers - Princeton, MN

May 2020 to November 2021

Part of a 4 man printing press crew,from set up to ship out loading paper, to taking the trash whatever was needed to get the job done on time was the description here. This job is where I entered the workforce way back in 03 and I still benefit from what I learned on the job for those years. Have put in a few stretches of time in there but I'm looking to hang my hat elsewhere and permanently Machinist

Unique Machine LLC - Anchorage, AK

June 2018 to February 2019

I ran slotter witch machines 2, 20' sections of oil well pipe in a pass. Heavy on the math as the tolerances for such an important component of the oil and gas industry were tight. With spinning heads every 6" I would match the blueprint specs and perforate the pipe with "slots" long narrow holes in the 4'-20' oil well pipe witch ends up being the very way the fluids go in and come out of the ground. Myself with another employee assisting me became the entire sec shift in an effort to run round the clock. Maintenance of machinery a secondary responsibility of the employee operating. Molder operator

Woodcraft, Foreston - Foreston, MN

March 2013 to February 2016

I am responsible for setup and operation and maintenance of the moulder or tenner to meet quality and quantity standards in the production of customer products. Receives direction from the supervisor and notifies them when more work is needed.

Maintains the work area, machinery, and tools in a neat, clean, and orderly fashion.

Follows all safety procedures, rules, and guidelines; and notifies the supervisor of any existing or potential safety issues.

Follows all standard operating procedures and notifies the supervisor of potential procedural improvement's.

assists in other work areas when the work load permits or requires. cooperates with and supports co-workers and gets involved as a team player.

meets or exceeds the production standards for the position. Accurately, throughly, and legibly completes all documentation related to the position; i.e, production reports, accurate time keeping, etc.

observes closely the operation of the tools and machinery and notifies the supervisor immediately of malfunctions of maintenance which may be

needed.

monitors product constantly to ensure that quality standards are being met and rejects product that does not meet quality standards.

reviews status of prior shift and prioritizes work. reviews work orders to determine what materials and tooling is necessary and relays the tooling needs to his/her supervisor.

Obtains materials and tooling for production run.

Sets up moulder or tenner and runs test samples.

Checks samples against customer specifications using measuring instruments;i.e, digital, calipers, square, etc, and makes adjustments as needed. Conducts production runs and monitors tolerances while running, sorting out defects as to what is scarp and what can be reworked.

Sets up sanders and determines proper sandpaper grit to do room of do proper sandpaper grit to do profile sanding.

Returns all tooling to the tool room and informs tool room of problems. Performs scheduled machine maintenance as needed.

Preforms scheduled machine maintenance as needed.

Sets up and operates molder or tenner.

temp worker

May 2012 to January 2013

Fill temporary positions for clients. For me this included building roof trusses for homes. I was at this postion for 5 months.

Next I worked at a company that bulit wire harnesses for companies including Cummins.

I was at that postion for 7months.

Formen

Heavy metal services LLC - Askov, MN

September 2010 to January 2012

I started out has the only employee were we recycled electronic waste, due to my knowledge of production the company quickly grew to 7 employees under me. My job was to over see all day to day operations ie: training, s.supervising and working with customers. Processor

Bering Pacific Sea Food - False Pass, AK

May 2010 to September 2010

Processer

I was on contract for the salmon season in false pass Alaska in-between the north pacific and the bearing sea. I did everything from unload the boats (dock crane operator)from the dock to processing plant where we would processe them i.e., head, gut, sort, freeze, package, load on to other boats for shipment. This job gave me real experience in working remote locations. Steward

Alyeska, Gridwood - Girdwood, AK

March 2008 to September 2009

Dishwasher\kitchen helper

Temporary Worker

Work Connection - Princeton, MN

January 2003 to March 2008

Temporary worker I temporary positions for employers this included fork lift driver, injection molder operator in a plastic's factory. Floor hand printing the news paper.

Roll Tender

ECM - Princeton, MN

March 2003 to May 2007

jogger/rolltender

Went from basic entry level to having the same knowledge as others that have been with the company for 10 yrs in only 2 years. This went from stacking paper on pallets to being a press operator trainee which typically

takes 10 yrs.

Education

GED

Skills

• Forklift

• Maintenance

• Manufacturing

• Assembly

• Woodworking

• Packaging

• Machining

• Mechanical Knowledge

• Heavy Equipment Operation

• Welding

• Warehouse Experience

• Excavator

• Blueprint Reading

• Quality Inspection

• Crane

• Food Processing

• Calipers

• Mechanic Experience

• Handyman

• Loader Operation

• Load & Unload

Military Service

Branch: Army National Guard

Service Country: United States

Rank: Private

April 2007 to April 2011

Went to ft. Bennings home for wayward boys. Also known as Sandhill infantry school. 16 weeks of basic training because that will be fun. Now im strong and know how to be homeless effectively and I'm also able to more reliably put a projectile exactly where I want than anyone I have ever met in the military or civil world. State service ribbon for the 2008 rnc unrest as I was 1 of the 300 man quick reaction force deployed to st. Paul to help local state and federal law enforcement keep peace. Our unit later would deploy to DC for the inauguration of Obama.

Certifications and Licenses

Forklift Certification

April 2007 to Present

Additional Information

SKILLS

Only all of them. Like my dad always said,"perfect will have to do" I can use tools, measuring instruments, saws, jigs, of most types. All witch I have come across, I can operate. Forklift cert. Overhead crane cert. Excavator experience along with skid loader and general maintenance goes along with every single part of my resume.

Contact this candidate