Owner Operator Pick Up

CALVIN LEE

**** *** *** ****

ELLOREE, SC *****

903-***-****

**********.**@*****.***

WORK EXPERIENCE

DK And D Transport LLC 10/2016-PRESENT

CROSS, SC Salary: 1000.00 Weekly

OWNER OPERATOR

Safely operate tractor equipment’s of different configurations with varying weights allowed by law under certain conditions and speed limits in certain places. Conducts regular thorough inspection and maintenance of vehicle before taking it on the road to ensure safe and successful travel and to keep vehicle in condition. Responsible for replacing belts, hoses, sensors, water pumps, alternator, starter, brake shoes, wheel seals, brake drums and tires. Pick up, transport, and deliver goods to places for extended period of time and over long distances by operating my own truck. Ensure the delivery of goods and materials efficiently on the designated time and date with all the delivery documents needed. Understand and follow all travel instructions oral or written given by the company. Follow all regulations imposed by the Department of Transportation.

Department of the Airforce 03/201*-**-****

Charleston, SC Salary $25.03 USD Per Hour

Hours per week: 40

ELECTRONICS INDUSTRIAL CONTROLS MECHANIC

Repairs, maintains, installs, relocates, and troubleshoots a variety of production industrial plant machinery, equipment, and systems, identify electrical/electronic faults through a process of fault finding using electrical and electronic block diagrams, wiring diagrams, schematics, and technical orders. Performs operational tests, tuning, alignment and calibration of electronic controls systems and components. Test equipment and parts with pressure gauges, multimeters, micrometers, oscilloscopes, frequency counters, and function generators. Equipment includes, but is not limited to Elevating Transfer Vehicle, overhead cranes, diesel powered generators and air compressors, belt conveyors, power driven tow chain systems, elevator, truck loading docks, powered saws, hydraulic crane and vaculift system, compressors, air dryers, ice makers, chillers, chain driven separators (carousel), automated sortation systems, sealers, pneumatic operated spur switches, switchers, and sandblast equipment. Conducts the full repair cycle of disassembling, detaining the type and degree of repairs required, repairing, and performing operational and functional tests on thermostats, capacitors, switches, circuit breakers, fuses, relays, PLCs, motor starters, solenoids, contactors, circuit cards, drives, position sensing devices, ground faults, short circuits, and wiring continuity of AC and DC circuits.

Diagnoses malfunctioning apparatus such as transformers, motors, and lighting fixtures. Responsible for conducting preventive maintenance and replacing damaged and worn-out parts plus reassembling and installing equipment and testing calibrating complex electronic systems, components, and sub assembles. Checks system pressures and make necessary valve adjustments. Oils and greases machines and equipment. Installs power supply wiring and conduit for newly installed machines and equipment. Installs safety alarm devices on conveyor and sortation units. Orders required repair parts. Performs electrical repair and adjustment to motors, inverters, actuators, wiring, and associated components. Receives and assesses saw blades for serviceability. Operate and maintain bulk propane pumping stations refilling bottles for forklifts and portable heaters. Keeps machinery clean and performs first echelon maintenance. Inspects dock boards through the depot to determine if replacement is needed. Weld, arc or torch, burn or heat metals.

Defense Logistics Agency 07/2017 – 02/2019, 08/2013-11/2015

Red River Army Depot, TX Salary: $24.24 Hours Per Week: 40

INDUSTRIAL EQUIPMENT MECHANIC

Repairs, maintains, installs, relocates, and troubleshoots a variety of production industrial plant machinery, equipment, and systems, identify electrical/electronic faults through a process of fault finding using electrical and electronic block diagrams, wiring diagrams, schematics, and technical orders. Test equipment and parts with pressure gauges, multimeters, micrometers, oscilloscopes, frequency counters, and function generators. Equipment includes, but is not limited to hydraulic presses, carton making machines, pallet conveyors, dispensers, powered roller and belt conveyors, power driven tow chain systems, elevator, truck loading docks, powered saws, hydraulic crane and vaculift system, compressors, air dryers, ice makers, chillers, chain driven separators (carousel), automated sortation systems, sealers, pneumatic operated spur switches, switchers, and sandblast equipment. Conducts the full repair cycle of disassembling, detaining the type and degree of repairs required, repairing, and performing operational and functional tests on thermostats, capacitors, switches, circuit breakers, fuses, relays, PLCs, motor starters, solenoids, contactors, circuit cards, drives, position sensing devices, ground faults, short circuits, and wiring continuity of AC and DC circuits. Diagnoses malfunctioning apparatus such as transformers, motors, and lighting fixtures. Responsible for conducting preventive maintenance and replacing damaged and worn-out parts plus reassembling and installing equipment and testing calibrating complex electronic systems, components, and sub assembles. Checks system pressures and make necessary valve adjustments. Oils and greases machines and equipment. Installs power supply wiring and conduit for newly installed machines and equipment. Installs safety alarm devices on conveyor and sortation units. Orders required repair parts. Performs electrical repair and adjustment to motors, inverters, actuators, wiring, and associated components. Receives and assesses saw blades for serviceability. Operate and maintain bulk propane pumping stations refilling bottles for forklifts and portable heaters. Keeps machinery clean and performs first echelon maintenance. Inspects dock boards through the depot to determine if replacement is needed. Weld, arc or torch, burn or heat metals.

International Paper 12/2015-09/16

Manson, NC Salary: 23.37 USD Per Hour

Hours Per Week: 55

MAINTENANCE B

Position is responsible for installation, troubleshooting, preventative maintenance, cleaning, and repair of the Corrugator, EVOL, Four Color, Die Cutter, Jumbo, Stitcher and Unitizer containerboard plant machinery, pumps and equipment. Machinery can run up to speeds of 1,000 fpm and is equipped with steel rolls, knives, slitter blades, belts, and die cutters. Tasks are completed in close proximity to electrical, pneumatic, hydraulic, gravitational, mechanical, chemical, and thermal energy sources. Observes mechanical devices in operation and listens to their sounds to locate causes of trouble. Dismantles devices to gain access to and remove defective parts. Examines form and texture of parts to detect imperfections. Inspects used parts to determine changes in dimensional requirements. Adjusts functional parts of devices and control instruments. Repairs or replaces defective parts. Installs special functional and structural parts in devices. Lubricates and cleans parts. Starts devices to test their performance. Sets up and operates lathe, drill press, grinder, band saw, milling machine, welder, and other metalworking tools to make and repair parts. Movement, positioning, replacement of heavy weight equipment with the aid of mechanical means such as forklifts, pry bars, and chain falls. Position requires the use of hand tools such as wrenches, hammers, punches, screw drivers, pliers, and pipe wrenches on a continuous basis to perform normal duties. Tools used can range from a small 4" screw driver to a 36" pipe wrench. Tasks range from fine adjustments that require dexterity for circuit board adjustments to using both hands to apply force when pushing or pulling a wrench to break pipe fittings. Performs plant startup tasks, energizing all equipment and ensuring operation. Cleans machines with sandpaper, solvent, and wiping rags to prepare surfaces for painting. Oils and greases machine. Installs power supply wiring and conduit for newly installed machines and equipment such as conveyors and programmable controllers. Connects power supply wires to machines and equipment, and connects cables and wires between machines and equipment. Diagnoses malfunctioning apparatus such as transformers, motors, and lighting fixtures and replaces damaged or broken wire and cables. Replaces faulty electrical components on machine such as relays, switches, and motors, and position sensing devices. Diagnoses and repairs or replaces faulty electronic components, such as printed circuit boards. Replaces electric motor bearings and rewires motors. Plans layout of wiring and installs wiring, conduit, and electrical apparatus in buildings. Diagnoses and replaces faulty mechanical, hydraulic, and pneumatic components of machines and equipment. Cleans work area, tools, and equipment. Utilizes computer for work order entry and completion status. Initiates purchase order for parts and machines.

Defense Logistics Agency 11/2013-01/2015

Red River Army Depot Texarkana, TX Salary: 21.07 USD Per Hour

Hours Per Week: 40

HEAVY MOBILE EQUIPMENT OPERATOR

Operates tracked and wheeled combat military vehicles throughout an active depot environment. Follows all local, state and federal rules, regulations and procedures during operations. Operates straight-in-line trucks, tractors with trailers; motor coaches, which have a gross vehicle weight of more than 32.000 pounds. Operates and performs preventative maintenance on material handling equipment such as MAXXPRO Recovery Vehicle, wheeled heavy tow tractor, caterpillar low speed crawler type tractor, truck tractor, wrecker or recovery vehicle for the purpose of moving heavy equipment such as tracked combat vehicles, wheeled tactical vehicles, trailers, non-tactical wheeled vehicles, stacked vehicles or other Class Seven equipment. Maneuvers vehicles driving and backing over uneven ground; in narrow or congested areas; between buildings and other vehicles; and when at loading docks.

Assists with replacing brake shoes, wheel seals, brake drums and tires on the Mine Recovery Vehicle. Tows equipment weighing up to 120,000 pounds. Operates heavy equipment, such as graders, tractors with bulldozer or angle dozer blades, front-end loaders, backhoes, trench diggers, and large industrial tractors with pan or scraper attachments with the use of clutches, levers, brakes, and accelerator to control the crane. Operates bridge crane which travels the length of a 700 foot way, spans 120 feet and carries two 30 ton capacity lifting hooks with an adjustable center distance controlled by one operator. Operates equipment safely observing and obeying signals from personnel. Operates and performs preventative maintenance on equipment by performing operator maintenance tasks such as: checks gasoline, oil, water, air pressure, steering gear, horn, and brakes on trucks, forklifts and other utility vehicles in accomplishing warehousing duties.

BAE Systems 01/2013-11/2013

Charleston, SC Salary: 23.04 USD Per Hour

Hours per week: 40

ELECTRONICS TECHNICIAN II

Served as a lead technician for deintegration and quality assurance in support of the Space and

Naval Warfare Systems Command (SPAWAR) Mine Resistant Ambush Protected Vehicle

(WRAP) C41 integration project. Demonstrates how to deinstalls tactical electronic systems from (WIRAP) and Mine Resistant Ambush Protected-All Terrain Vehicles (MATV). Performs testing and quality assurance of Tactical Operations Center Inter-communication System (TOCNET) and Vehicle Inter-communication System (VIC-3). Teaches how to deinstall AN/VRC-92 series SINCGARS, AN/VRC-103, AN/VRC-104, and AN/VRC-110 radio systems. Dissembles and conducts limited testing, and troubleshooting of Blue Force Tracker (BFT). Instructs how to deinstall AN/UYK-128(V) 4 variants ofB1ue Force Tracker (BET) in WRAP and IMG vehicles. Deinstalls power cables, radio frequency (RF) cables, and antenna and antenna mounts, using schematics and technical drawings. Teaches others how to perform system checks using basic electronic test equipment. As a lead technician I direct others on the installation, removal, and testing of the CROWS weapons system. I deinstall communication cables for AN/VRC-103, AN/VRC-104, AN/VRC-110, AN/VRC-111, AN/VRC-112, CREW, BFT, EPLRS, TOCNET, CVRJ, DUKE, DVE, and replacement of the digi-rack required for the retrofit of various MATV and IMG vehicles. I Inspect, test and certify basic assemblies, subassemblies, parts and systems for compliance with specifications and quality assurance standards using blueprints, schematics and technical manuals. I verify materials or electronic equipment against receiving documents; noting and reporting discrepancies and obvious damages; routing materials to prescribed storage locations; storing, stacking, or palletizing materials in accordance with prescribed storage methods; rearranging and performing inventory of stored materials; utilizing computer-based inventory and bar-coding system for entry, identification and tracking of material; examlmng stored materials and reporting deterioration and damage; removing material from storage and preparing it for shipment; and operating hand or power trucks in performing warehousing responsibilities and operating motor vehicles requiring valid Commercial Driver's License (CDL).

EDUCATION

Texarkana College

Texarkana, Texas

Major: Air Conditioning / Refrigeration

Orangeburg-Calhoun Technical College

Orangeburg, South Carolina US

Major: Industrial Electronics Engineering

JOB RELATED TRAINNG

I am certified in the following areas:

I completed Siemens Step 7 PLC training given by NTT on 01 September 2016.

I completed MAXXPRO Recovery Vehicle OPNET course on 06 December 2013.

Packaging, Storing and Transporting of Hazardous Substances (Ammo-62)-December 2004 Hazardous Material Handler-April 2003

REFERENCES

Wesley White: Supervisor Department of the Air Force

Phone Number: 843-***-**** Reference Type: Professional

Darren: Maintenance Supervisor at DLA

Phone Number: 903-***-**** Reference Type: Professional

ADDITIONAL INFORMATION

I am willing to travel to installation sites if needed to perform assignments. I have a class A

commercial drivers license (CDL). I have a Transportation Worker Identification Credential (TWIC) card.

Contact this candidate