Juan C. Olmedo
Canyon Country CA *****
Cell 661-***-****
E-mail ad39mq@r.postjobfree.com
OBJECTIVE
Strong attention to detail providing precise measurement results directly to AS9102 forms. Driven to continuous improvement. Problem solver with enthusiasm and self-motivation.
EXPERIENCE
37 years of precision measurement.
Quality Control Management
AS9100 Rev D compliance/Internal Auditor
Statistical Process Control
Lean manufacturing
Solidworks, Mastercam
Cmm programming: PCDMIS,Calypso, VIRTUAL DMIS, OPEN DMIS, TUTOR, FLBII, QC5000, GEOPAK,GEOMET, CMM MANAGER,QUINDOS.
FARO ARM Polyworks, VERISURF, SOLID WORKS,MasterCam
Precision tool calibration
Bilingual-Spanish
REFERENCES:
Ed Valades, Maroney Company Shop Manager. 818-***-****
JC Maroney, Maroney Company-President. 818-***-****
TRAINING:
PC-DMIS CAD, ++ and Advanced by Hexagon Metrology.
Faro Arm Polyworks/Verisurf/CAM2
G.D.T Y14.5 1982 &1994
Lean Manufacturing (AIW) Training with Boeing in Tacoma.
ISO Internal Auditor Course
Pro/ENGINEER Wildfire 5.0
Solidworks cad modeling and drawing.
Mastercam, Lathe and Mill
February 18, 2022 to Current.
Founder Prezeissprogramming
Prezeissprograming LLC
Canyon Country California
Write cmm programs, using cad models or blueprint
Providing precise measurements using PCDmis, Calypso
Virtual Dmis, Open dmis, Tutor, FlbII, QC5000, Geopak,
Geomet, Faro Arm with Polyworks, Verisurf, Solid works
Or your software package. Taking your customer requirements.
And producing desired results and documentation
August 15, 2019 To Current
Quality Specialist / CMM Programmer
Maroney Company Northridge CA
Ultra precision machining
Write cmm programs, using cad models or blueprint
Providing precise measurements, First Article, In process inspection
and Final Inspection. Auto-Fill AS9102 Form 3 directly from cmm results.
March, 2019 To August 2019
(Posted at the end for relevance)
January 2019 March 2019
Quality Control Inspector / CMM Programmer
Pacific Sky Sun Valley CA
Turbine/Compressor Vane & Blade, for T56/501/501K aircraft engines.
Perform first article/in process/final inspection. Write cmm programs
And manual inspection tools.
October 2018-January 2019
Quality Control Consultant / CMM Programmer
Lean Manufacturing Group, Valencia CA
Perform inspection of components for the Aerospace, Aeronautics,
Defense, Semiconductor, and Medical industries. Utilizing conventional
surface plate inspection techniques and CMM Programming with PCdmis.
May 2018-October 2018
Quality Control Consultant / QC Manager
LA Gauge Company Sun Valley CA
Providing ultra-precision machining and optics capabilities to the Aerospace, Defense, and Commercial Industries. Specializing in machining and polishing Beryllium components used in nuclear reactors, guidance systems, satellites, and targeting systems holding machining tolerances to 50 millionths of an inch, and polishing tolerances to the billionths (angstroms).
Communicate with customers on all quality issues
Manage a small team of quality engineers to achieve timely and thorough resolution to quality issues
Manage inspection department (communicate vision, minimize queue time, distribute priorities, respond to personnel needs, communicate inspection challenges to management)
Initiate and track internal and external corrective/preventive actions
Own all returned parts from customers (Investigation, analysis, synthesis, and customer communication)
Manage calibration technician to ensure all shop floor tools are calibrated
Coordinate source inspection
Perform contract reviews
Articulate mechanical inspection instructions in job router
October 2017-May 2018)
Quality Engineer/Cmm Programmer
Triumph Fabrications, San Diego CA
Cmm programmer (Pc-dmis)
Fixture design for jet engine parts
Manufacturing order editor, writer.
October 2014-October 2017
Quality Assurance Supervisor/Cmm Programmer
Cubic Corporation, San Diego CA
Cmm programmer (Pc-dmis/Cmm Manager/FaroArm)
Cmm operator/programmer Trainer
Supervised crews in Balboa, Otay Mesa and Tijuana Mexico
February 2014-October 2014
Contractor (Through ITG)
Means Engineering, Carlsbad CA
Cmm programmer (OpenDmis)
May 2012-February 2014
Contractor
Achates Power San Diego CA
Cmm programmer (PC-Dmis)
August 2013-September 2013
Contractor
CCIND Santee CA (Verisurf)
Verisurf/Faro Arm measurements on Aircraft doors
July 2012-July 2013
Contractor
Triumph Structures Chatsworth
Cmm programmer (PC-Dmis)
Offline programming with PC-Dmis
Operator trainer
August 2012-November 2012
Contractor (Through Multax Inc.)
Triumph Structures Brea
Cmm programmer (PC-Dmis)
Cmm programming with PC-Dmis
August 18, 2008 to April 9, 2012
Achates Power San Diego CA
Quality Inspection Lead
MRB Leader, (Resolving root cause, corrective action)
Blueprint Checker, Verify that stack-up tolerances are correct on assemblies. Assure that G.D. & T. feature control frames are adequate.
Formation of the quality department. (Quality procedure, Instruments, inspection plans etc.)
Cmm operation & programming (PC-Dmis, Open-Dmis software) and open set-up. Inspect R&D mechanical parts, reverse engineer parts.
Measure first article parts from Vendors per internal design blueprints and cad models.
Final Inspect parts.
November 26, 2007 to August 15, 2008
Alt’s Tool & Machining. Santee CA
Lead inspector
Cmm programming (Virtual Dmis software) write program per blueprint requirements. Faro arm (portable cmm) measurement operations
Measure first article parts from Lathes, Mills, Conventional machining, E.d.m. and Flat pattern sheet metal per blueprint and customer specifications.
Final Inspect parts.
January 22, 2007 to November 18, 2007
Quality Controlled Mfg. Lakeside CA
Cmm programmer
Cmm programmer (PC Dmis software write program per blueprint requirements)
Measure first article parts from Lathes, Mills, Conventional machining and grinding per blueprint and customer specifications.
Final Inspect parts.
February 16, 2005 to November 10, 2006
(Posted at the end for relevance)
August 5, 2002 to February 15, 2005
(Posted at the end for relevance)
July 2001 to August 5, 2002
MPM Precision Chatsworth CA
Quality Control Manager (Sheet Metal)
Quality Assurance Engineer
ISO Management Representative/Auditor
Write/Revise Quality procedures to conform to ISO 9002
Respond to customer Corrective Action Requests
Train inspectors & Machinists (Blue-print reading, Inspection methods per Y14.5 G.D.T.
Document Control
Gage Calibration Control
Support safety training and audits.
January 2001 to July 2001
Classic Wire Cut Valencia CA
Senior Inspector (Medical Instruments)
Mechanical Measurement of medical & aircraft hardware.
Write First Articles & Procedures, train inspectors & machinists (Blueprint reading, Inspection methods, G.D.T.
February 1994 to January 2001
B&B Manufacturing Valencia CA
Cmm applications Engineer/1st. Article Supervisor (Hydraulic Valves)
Supervise and train inspectors, cmm programmers & operators.
Lean Manufacturing & ISO 9002
1993-1994
True Position Technologies Valencia CA
Chief Inspector/Cmm programmer
Directed first article inspection department and wrote cmm programs.
1992-1993
Coronado Manufacturing Sun Valley CA
Chief Inspector
Managed first article inspection department and wrote cmm programs.
1992
Rainbird Glendora CA
First Article Inspector (Temporary assignment)
First article inspector, operated Sheffield C.m.m. and hand tools.
1989-1992
Accratronics Seals Corp. Burbank CA
Cmm programmer/First Article Inspector
Operate manual & cnc cmms.
Program cnc cmm.
Program optical video measurement system.
Calibrate precision equipment & measure first article parts.
1988-1989
Space Ordnance Systems Canyon Country, CA
Receiving Inspector
Verify incoming mechanical parts.
1987-1988
Pertec Peripherals Chatsworth, CA
Source Inspector/Receiving Inspector
Verify hardware at vendor’s facilities
Verify incoming mechanical parts.
1985-1987
Hydro Mill Precision Chatsworth, CA
Final Inspector
First article, surface plate lay-out and in process inspection.
Verification of operations to Manufacturing orders, blueprint and specifications.
February 16, 2005 to November 10, 2006
Jordan Outreach Ministries Coachella, CA
Associate Pastor
Drive to bus stops where attending kids wait for transportation.
Direct an activity with kids 5-18 such as swimming, dodge ball, basket ball, study club.
Maintain order during dinner for all attending children
Play drums during praise and worship.
Teach a bible based message to relate into today’s life and help kids make a decision during difficult times.
Drive 18 foot box truck to and from food banks.
Organize Distribution Center (food, clothes, etc.)
Train forklift drivers and issue licenses.
Distribute bulk food to receiving churches.
Council family members in various difficulties
Play and sing during church service.
Direct street evangelistic outreaches, (drive, sing, preach, teach, distribute food to families)
Direct church in Mexico doing similar above listed items.
Translate for English speakers into Spanish.
August 5, 2002 to February 15, 2005
Children’s Hunger Fund Pacoima CA
Church Relations Coordinator.
Train church members and directors in compassion ministry (giving out food and God’s word)
Trained locally and Internationally (Africa, Central America)
Surveying local areas for ministry opportunities.
Yearly audits of recipient churches
Drive 18 foot box truck to and from food banks.
Organize Distribution Center (food, clothes, etc.)
Train forklift drivers and issue licenses.
Distribute bulk food to receiving churches.
Play and sing during training.
Translate for English speakers into Spanish.
March, 2019 To August 2019
Assistant Director
FRED JORDAN MISSION
Manage kitchen to feed homeless, organized donations
In kind for distribution. Assigned tasks to employees.
Speak at chapel, sing and play keyboard. Maintain building.