ISAAC MONTELONGO

ad2ovg@r.postjobfree.com Journeyman Electrician

***/ ***-****

Performed work as an Employee, Contactor, Sub Contactor Electrical Services Integrated 2012 – Present

Foreman / Lead / Construction Manager / Field Electrician Commercial, Residential, and Industrial properties including medical facilities. Experience with Multi-Family units.

Assisted with system Engineering, Inspections, on call after hours as required /service. calls, Installations, system upgrades, sub-contracting. Installed, upgraded and Maintained: Switchgear, MCC, Transformers. Lighting retrofits and repairs. Installation and repairs for business signs and billboards, Control panels, LED work and retrofits. Operated Lifts and cranes for lighting and signage. Electrical panel wiring. MPU upgrades for Solar and EV

“Charging Systems”. Generator management. PPE Equipment and training. BAS and Fire Alarm Systems. Card access, nurse call, oxygen systems, EMS Systems, Fan and Exhaust systems, HVAC Controls. Low and High Voltage Electrical (4-20ma signals to 4k), 3 Phase Systems, Conduits (Threading and Installing) various types of Race ways, Ice Bridges. Overhead-lateral. Programming, testing. and Commissioning.

Safety meetings and Procedures (Water Tanks, Emergency Signage and Implemented Daily/Weekly Meetings) with GC’s, Sub’s, Engineers, suppliers, Vendors, Inspectors, and Clientele. Coordinated site fencing, Temporary power, Environmental involvement, Mitigation. Field Construction Manager. Oversee all aspects of new Construction: Coordinated Contractors with scheduling, site Organizing and Material delivery and storage. Operated in the field, worked off approved Plans and Specs, State and City requirements, created “As-Builds” - and Redlines. Progress Reports with Photos (Smart Sheets, Base Camp), (Item Deadline Completion dates and site modifications if necessary) Field Supervision and Coordination:

Ground Elevations, Soil Sampling / Compacting, Inspections, Foundations / Structural Build; for Fuel Tanks, Generator Pads and Equipment Shelters, Ice Bridge, Raceway Build. Supervised and Documented Structural Construction and Inspections (Foundation/Structural/Embeds) including all Mortar and Concrete work (including Inspections with Masonry Inspectors). Electrical Installations including Trenching, ATS, Cam-Lock, Interior/Exterior Lighting, HVAC, Fire/Control Systems. Battery Backup “Banks”, Charge Controllers, Inverters, Generator / remote Equipment Monitoring.

Performed office and site meetings and training. Coordinated Inspections with LA County structural, Electrical (Edison, DWP, PG&E), Civil Engineers as well as secondary Sub Project Managers, Designers as well as Environmental Companies and Surveyors. MMR Constructors: Contractor for Chevron; Bakersfield, CA 2011-2012 Electrician (Temporary) “Cogent Build”

• Control Room Build Up. Electrical trade installations including HVAC, Fire Alarm, Control Panels, Transformers and equipment systems in compliance with blueprints and schematics.

• Installed grounding grids, cable trays, raceways and various types of junction boxes, power feeders, transformers, switchboards, Switchgear, MCC Tie-ins, Controllers, Variable Frequency- Speed-Drive Centers of various sizes, circuit breakers, heating units, exterior and interior lighting, Fire Life Safety systems, Pumps, Air Conditioning, Chiller Power-Up, Security system, Generators, conduit systems, wiring of electrical equipment, use of a variety of hand tools and measuring equipment, worked alone and as a group. Lead man.

• Coordinated with Engineers, Supervisors, and Inspectors respectively. Commissioning. Control Room Start-up & Operations.

Wyotech Technical: Long Beach, CA

2007- 2011

Electrical Instructor

• Basic circuitry evolving into complex Electrical systems while applying NEC guidelines. Conduit bending, threading, electrical wiring techniques, install various electrical apparatuses.

• Single and three phase systems, Panel boards, Disconnects, transformers, power circuits, feeders, grounding techniques, rigging and hoists, CCTV systems, Fire Alarm Systems, HVAC Systems, Security systems, Networking, Lighting applications, motors and motor control systems, solid state circuitry, PLC. Emergency Systems, lockout and tag out procedures. Hazardous locations. Switchgear and MCC panels. Instrumentation. Photo Voltaic Systems training.

• Safety practices in the workplace. Various types of lighting and installing techniques as well as design a warehouse plan. Load calculations. UPS Systems, Generators. Tools, machinery, workmanship in the field. Inspect all work prior to students applying power. Record keeping. Materials ordering and stock. On call and over time as necessary. Tutored students.

• Coordinate with school administrators and supervisors as required. NEC codes. M. Electrical Systems: San Pedro, CA 1995 –2007;

Project Manager / Supervisor / Contractor / Sub Contractor)

• Install various types of high and low voltage electrical systems. Installed conduit, boxes, raceways, panels, lighting, switches, and communication systems.

• Installed Fire Alarm systems, HVAC, Security systems, Computer room power and lighting, CCTV, Data Networking, Card Access in compliance with blueprints and schematics.

• Worked in commercial, Industrial, and residential job sites concerning new construction, remodeling, and retrofits. Worked off plans and specifications. HVAC Systems, Controls and Instrumentation, BAS, DDC. Control Room Maintenance.

• Also performed various subcontracting with voltages; 4-20ma to 12k VAC. Maintenance with large transformers, Switchgear maintenance. Transformers. MCC panels, pumps, Air conditioning, motor installations and applications. IMC.

• PLC and System Controls. Industrial Plants. Motor repair, PLC troubleshooting, equipment setup

relocation. UPS and Generators. Energy Management Systems.

• Estimated projects, cost analysis, record keeping. Inspections. Coordinated with local inspectors.

Los Angeles Unified School District: Los Angeles, CA 2005 –2006; 2008-2009 Electrician (Temporary Assignment)

• Installed conduit, back boxes, panels, raceways, power poles, Power for: HVAC, Fire Alarms, security systems, electrical switches, and outlets.

• (ITD) Interpret work for various schools from blueprints and specs. Installed internet and wireless communication systems, PA, intercom, Fire-Life safety systems, lighting, timers, outlets, ballasts, and various circuits. Ballast work. High lifts, high-lighting, high voltage transformer maintenance.

• Performed service calls and planned projects. Switchgear and MCC panels. Single and 3phase power. Motors. Safety Meetings and Certifications. UPS, Generators. Gymnasium lighting, stadium lighting, exterior lighting, parking lot lighting. Clock systems, CCTV. Wire mold, raceways. Installed power for AC Units. Record keeping.

• On call and after hours as required. Transformers. Maintain shop and equipment and material stock.

• Operated lifts and machinery as required for daily job performance. Weekend work after hours work and on call as required by supervisors and school administrators.

• Work alongside other trades and contractors as required. Universal Construction: San Pedro, CA 1993-1997

Electrician/Field Supervisor

• Electrical Maintenance/Installation: high and low voltage electrical systems. Installed raceways, conduit, back boxes, cabinets, wireless communications, fire alarm systems, HVAC, security systems, PA, intercom, fiber optic. Troubleshoot and repair various electrical systems including Wire and Termination of Pre-Act Systems, Solar Equipment, wireless communications.

• Installed ballasts, lighting, outlets, switches, sensors. UPS, Generators, grounded systems, voice and data, nurse call, card access, CCTV. HVAC. Operated Backhoe, forklift, Boom lifts, threaders, welding, switchgear, and transformer installations and terminations. Electronic Systems USA: Long Beach, CA 1988-1993

Electrician/Area Supervisor

• Installed electrical panels, raceways, back boxes, Panduit and motor control panels, Automation and lighting controls, computer-controlled temperature and pressurization systems, pneumatic systems, VSD systems, Solid State technology. Dry and wet standpipe systems, Ansul, Pre-act systems, Halon, Suppression and Fire alarm Systems. Generators, Transformers, panel boards.

• Serviced, installed, preventive maintenance, repaired electrical systems at various job sites such as high-rise buildings, hospitals, LAX, Orange County Convention Center etc. HVAC and Controls. Closed circuit television, nurse call, intercom, and card readers. BAS.

• Systems include CSI controls, Dorado, Honeywell, Landis and Gear, Metasys, EST, Notifier, and Evac Systems. Motorola, Access Controls, and CCTV systems. Unity, Siemens, Allen Bradley, General Electric, JC 80, Checkpoint. Allen Bradley, GE Echave Electrical: Carson, CA 1985-1988

Electrician Apprentice

• Started as a volunteer then part time to eventually a full-time worker. Worked at residential job sites and small commercial properties.

• Installed service equipment, panel boards, and conduit: underground and overhead, grounding, separately derived systems, back boxes, fire alarm systems, security systems, CCTV.

• Installed lighting and outlets, switches, ballasts, panels, relays, motor controls. Installed all types of wiring, armored cable, plenum, underground etc. Single phase and three phase systems. Education:

Graduate – San Pedro High School (Electrical/Mechanics) ITT Technical Institute - Associate of Applied Science in Electrical Engineering National Institute of Technology; Electrician Program (Attended as a Journeyman) Cal State Long Beach; HVAC Systems Engineering Certificate Program EST, Fire Lite, Silent Knight, DSC, Notifier, AAMES, FCI, Honeywell, Game well, Allen Bradley, Omron, Motorola, Siemens, CSI, Web enabled video systems, Delta 1000-2000, General Electric, Westing House, Nortek G2e, G3e (Factory Training. Wireless Control Systems) Performance Certificates:

Electrical, Lighting, Motor Controls, Access Controls, Fire Alarms, Fiber optics, Multiplex Networking, Security Systems. HVAC Controls, CCTV Systems. HVAC Systems, Transformers, Asbestos Certified. Operated scissor and boom lifts, forklifts, hydraulic machinery, back-hoe, welding, saws and coring equipment. Sprinkler, suppression systems, pressure systems, valves and controls. Performed on site and local safety meetings and training seminars. CPR Certified. Lock Out/Tag out

Training courses:

Employee “Harassment at the workplace”

“How to be an effective Supervisor” Lifts and cranes Accidents at the workplace Effective Soft skills

Management and record keeping OSHA 30 (safety requirements) Personal Protective Equipment Hazardous Locations

Building Automation Systems Fire Extinguishers

Computer skills; DOS, OS2, Word, Excel Ladders, Lifts, hoists PowerPoint, CAD, Pinnacle. Genesis, Iomega, etc.. Preventive Maintenance Techniques Oilfield Hazardous Safety Card Wet/Dry Suppression Systems Lock out Tag-out procedures and Awareness Carpentry, Drywall, Plaster, concrete. Welding Applications (Arc/Gas) Plumbing Applications at the Workplace General Locksmith Operations EVCO Vehicle Charging Systems

Contact this candidate