CURRICULUM VITAE
Name JOSEPH PANES
Email Address ad2ohc@r.postjobfree.com
Mobile no. 056******* (Saudi Arabia)
Nationality Filipino
Date of Birth March 24, 1967
Education BSc in Electrical Engineering, 1991
Feati University, Manila, Philippines.
Associate in Electrical Engineering, 1987
Feati University, Philippines.
Qualifications Electrical Engineer with 30 years of Experience in Supervision, Installation of all Electrical System in Hospital, High Rise Building
(Residential and Commercial). Petrochemical, Oil and Gas and Power Plant. Review Shop Drawings, Bill of Quantities, Material Submittals.
Country’s Saudi Arabia, Nigeria Africa, Taiwan Republic of China. Company (ZFP) Zuhair Fayez Partnership Consultants, Position Senior Electrical Engineer
Current Project
Behavioural Care Specialist Hospital (SABIC Project) Riyadh, Saudi Arabia
Ministry of Defense (MOD)
An Nabhaniyah, Qassim, Saudi Arabia
Responsibilities:
Review Shop Drawings, Bill of Quantities, Material Submittals and Specification. Page 2 of 5
23 July 2014
Monitors and controls all matters related to electrical works quality assurance and ensures that all jobs meet quality standards.
Supervision of all electrical works and ensures compliance and conformity with the provisions of engineering techniques and procedures.
Check and ensure proper materials are used.
To monitor day-to-day operational aspects of the project depending on the assigned section of development and prepare daily accomplishment report.
All rules, regulations and procedures relating to site safety is strictly enforced. May.,2014 – June 2019 Riyadh, Saudi Arabia
Position Site Electrical Engineer
.
Project
King Abdulla Financial District (KAFD)
Hill International the Management
Responsibilities:
Review Shop Drawings, Bill of Quantities, Material Submittals and Specification.
Monitors and controls all matters related to electrical works quality assurance and ensures that all jobs meet quality standards.
Supervision of all electrical works and ensures compliance and conformity with the provisions of engineering techniques and procedures.
Check and ensure proper materials are used.
All rules, regulations and procedures relating to site safety is strictly enforced. May 2012 – Apr 2014 Daelim-Saudi Arabia Co. Ltd., Jubail, Saudi Arabia. Position Electrical Engineer
Project
Saudi Elastomer Project, Jubail for Saudi Basic Industries Corporation (SABIC) Petrochemical project.
Shoaiba II, Combined Cycle Power Plant, Jeddah for Saudi Electric Co. Responsibilities:
Review Electrical Plan and Shop Drawings before or prior installation to any activity.
Supervise the Installation of Integrated Security System, CCTV, IDAS, Microwave Intrusion Detection System, Fiber Optic Fence Sensor System,
Supervise Cable pulling HV Cable, 630 mm2 and HV Cable jointing, 230 KV
Supervise installation of IPB, NSPB, MV/LV switchgear, and erection of transformers. Aug 2010 – Jan 2012 Zuhair Fayez Partnership Consultants, Abha, Saudi Arabia Page 3 of 5
23 July 2014
Position Electrical Engineer
Project
King Khalid University
Responsibilities:
Review Shop Drawings, Bill of Quantities, Material Submittals and Specification
Coordinates to the M.E.P. Engineers and other discipline in solving technical issues and site problems.
Attend construction site meetings with project manager to discuss any pertaining site matters to ensure no conflicts between site condition and contract drawings.
Feb 2009 – Mar 2010 Daelim-Saudi Arabia Co. Ltd., Jubail, Saudi Arabia Position Site Electrical Engineer
Project
National Chevron Phillips - NCP South Plot Project, Jubail Industrial City Worley Parsons the Consultant
Responsibilities:
Review preliminary site/building plans for accuracy and scope of details, Survey and monitor all electrical Installation and Distribution System during the execution at the site project such as: HV-Switch Gear Board and Cables, LV-Main Switch Board and Sub-Distribution System, Generator Set System, Lighting Protection System, Street Lighting, CCTV System, Telephone System, Intercommunication System, Public Address and Call System,
Perform testing in different types of wires and cables as per requirement for energizing and commissioning of all electrical equipment’s and devices prior to turn-8over and acceptance. Apr 2007 – Dec 2008 Daewoo Engineering & Construction Co. Ltd., Nigeria, Africa Position Electrical & Instrument Inspector
Project
NLNG Project for Federal Republic of Nigeria
Responsibilities:
Coordinate the contractor for the proper implementation and execution of works as per approved Shop drawings and details.
Implement the Quality Control Procedure in accordance with the Project Quality Plan.
Responsible for inspection and monitoring for the installations of MV and LV cables, package type substations/transformers, ring main units, main distribution switch boards, motor control centers and bus way systems.
Responsible for inspection and monitoring for the installation of conduits, wirings, pull boxes, cable trays and wire ways, fire alarm systems ( smoke detectors, control panel, bell and manual stations ), intercom system, paging system, power outlets and switches, lighting systems, power systems, grounding systems, panel boards and breakers, disconnect switches, cable trench excavation and backfilling for underground power, wire terminations, to make assurance that all works executed by the contractor was in accordance with approved drawings and specifications of the project.
Rejects and issues non-conformance for works that are not complying with project specifications, material submittal and quality workmanship. Page 4 of 5
23 July 2014
Conduct punch listing of finished works.
July 2004 – July 2006 Drake & Scull International, Jeddah, Saudi Arabia Position Electrical Inspector
Project
Hotel, Buildings
Responsibilities:
Monitors and controls all matters related to electrical works quality assurance and ensures that all jobs meet quality standards.
Monitors the electrical works and ensures compliance and conformity with the provisions of engineering techniques and procedures.
To conduct electrical inspection and ensure proper materials are used.
To monitor day-to-day operational aspects of the project depending on the assigned section of development and prepare daily accomplishment report.
All rules, regulations and procedures relating to site safety is strictly enforced. Feb 2000 – Feb 2004 William Golangco Engineering, Manila, Philippines Position Electrical Supervisor
Project
Manila Central University Hospital
Responsibilities:
Review electrical wiring layout of buildings such as residential, commercial and industrial as per project specifications and comply with NEC & NEMA standard specification.
Supervise all electrical construction works in accordance to approved plans and update issued for construction drawings.
Performs site engineering works and supervise during installation, Oct 1996 – Nov 1999 Daelim Engineers & Construction, Taiwan Position Electrical Supervisor
Project
Petrochemical Project
Responsibilities:
Supervised and monitored the sub-contractor’s electrical works in project site and facilitate the daily program schedule of nominated sub-contractors.
Prepares daily schedule for nominated sub-contractors as per master program of work for their direct work force allocation on project site.
Checking, inspection and supervision of Electrical quality of works of nominated sub- contractors if their works are done accordingly and as per approved drawing, daily and weekly progress monitoring of nominated sub-contractor works, and checking daily manpower allocation on project site.
Page 5 of 5
23 July 2014
Oct 1995 – Apr 1996 Intermil Power Corp., Manila, Philippines Position Electrical Inspector
Project
Manufacturing Plant Project
Responsibilities
Accompany the Consultant to carry the inspection.
Issues NCR’s when and where required, and check that the construction department to provides timely appropriate corrective and preventive action.
Carry out statistical analysis of the inspection and test results to improve quality operation on site, to verify testing checking compliance and advice Site Electrical works as listed in the ITP’s (Inspection Test Plan) and approved Shop Drawings are executed and properly documented.
Training and Seminars:
Meralco Foundation Institute, Inc. - Program Logic Formulation-1 (Computer Programming), April. 10-15, 1995.
ACEL under TESDA and World Bank Vocational Training Program II - Trade Testing Officers’ Course, Sept 15-19, 1995.
Daelim-Formosa Aroma Project- Taiwan, ROC- Fire and Safety In-Service Training Program, Jan 26, 1997.
Drake and Scull International – Jeddah, Saudi Arabia - Scaffold Training, August 13, 2005.
Daewoo Engineering and Construction Co. – Testing of Equipment’s, Feb. 2-7, 2008.
National Chevron Phillips, Saudi Polymers Co. – Training of Working at Heights, May 15, 2009.
National Chevron Phillips, Saudi Polymers Co.- Training of Working at Confined Space- July 23, 2009.
Saudi Elastomer Project – Training of Permit to Work & Job Safety Analysis Risk Analysis, Heat Stress. -Sept.8, 2013.