Heather Hull

Felicity, OH *****

ad2jx1@r.postjobfree.com

+1-937-***-****

I would like to not only utilize my skills and experience in a new work setting but also learn new skills and trades to add to it.

Work Experience

Plastic Press Operator

Jadex Inc./Lifemade - Erlanger, KY

May 2022 to November 2023

Press Operators are responsible for operating and tending injection molding machines, visual quality inspection, packaging, labeling, and moving of product.

• Tend to assigned plastic injection molding machine(s)

• Inspect, trim, clean, and package products to customer's specifications

• Maintain safe and clean work environment by complying with procedures, rules, and regulations.

• Read and comply with work instructions.

• Ability to work independently

• Attention to Detail

• Dexterity and hand and eye coordination

• Strong problem-solving skills

• Ability to lift up to 50lbs

• Ability to wear protective equipment such as hearing protection, eye protection, protective masks

(respirators), protective gloves, etc.

• Assist in finding ways to meet or exceed labor rates.

• Ability to read and interpret drawings.

• Ability to work for long periods in a standing position. Material handler / Warehouse Associate

Circle Packaging LLC. - Newtown, OH

August 2020 to May 2022

My job duties would vary depending on what product needed to be made for that day and what machine I would be working on.

• Check work orders / deadlines to plan production goals for the day/week.

• Set up machine for production.

• Find the mold needed for production by locating product number.

• Measure mold with tape measure.

• Get material (plastic rolls) needed for production, based on product width/height with forklift.

• Use a crane lift to lift material in the air to secure it onto a cutting machine.

• Set up machine according to the measurements taken from the mold.

• Do the math from the order sheet to figure out how many sheets of plastic need to be cut in order to produce the total number of parts needed for customer's order, according to the measurements taken from the mold.

• Do the math to figure out how many sheets need to be cut-Example: Total number of parts needed by customers order divided by the number of parts on mold cutout.

• Set timer on cutting machine and cut plastic sheets.

• If parts need taped, they would go to the taping table before being placed into the oven to be baked.

• Set the appropriate temperature/bake time on parts oven according to the product being baked and bake products.

• Set up parts cutting machine with correct cutting measurements according to product manual, using hand tools.

• Place finished baked / taped plastic sheets onto parts cutting machine to cut out the parts needed for production of orders.

• Cut parts are then stripped from the rest of the plastic sheet, then place into boxes with correct product number on the box.

• If parts need to be folded or have any cutouts in them they would then go to the machines and the Front Warehouse to be folded or have holes punched out in them.

• Once parts are finished there they are carefully counted and placed back into their correct boxes, the boxes are then taped up.

• Taped boxes are then taken to a scale to be weighed so their label can be made.

• The labels are then printed and placed on the box.

• The boxes then go to the shipping station to be shipped out. Bartender/Server

Envision Cinemas Bar And Grille - Cincinnati, OH

January 2019 to July 2020

• Put my code into the system so I can count down drawer make sure correct money / bills are in drawer and have enough cash for the day.

• Make sure everything is stopped behind the bar for the day/night including beer/licker, produce, shot glasses / beer glasses.

• Make sure all glasses are clean and that there is no dirty dishes in the dishwasher.

• Begin prep work which may include cutting of fruits / vegetables for drinks/cocktails and feeling syrup bottles.

• Make sure work area is clean for customers.

• Take customers drink / food order from bar.

• Put customers drinks/food order into the system and save their order to be sent to kitchen.

• Mix/pore drinks according to customers order and wait for kitchen to bring up customers food order to the bar window.

• Serve correct food / drink orders to the correct customers.

• Customers then can pay for their meal/drink with a credit card on an open tab or prepaid tab or use cash.

• Cash customers out and provide them with a receipt.

• Make sure they enjoy their experience by providing excellent customer service the whole time.

• At the end of my shift I would then clean all dirty dishes and place all clean dishes in the stock area.

• Make sure everything is stocked and ready to go for the shift coming in after me.

• Make sure my work area is clean not the end of my shift.

• Balance all of my credit card / cash receipts out to collect all of my credit card and cash tips and make sure my drawer is balanced at the end of my shift.

• Run end of shift report, check the report for accuracy, sign the report and place the report in the bottom of my drawer for supervisor.

Distribution associate/Equipment Operator

Gates Corporation - Hebron, KY

November 2017 to January 2019

• Get the order sheet from supervisor.

• Grab a charged pallet jack and a charged handheld scanner.

• Put my code/batch numbers into the scanner.

• Drive pallet jack around Warehouse to the correct aisle to grab the correct products based on product number on order sheet.

• Pull the correct amount of product and scan barcode on products then place product/products into the gaylord on pallet jack.

• I have retrieved all items on my order sheet I would then drive the completed order list in the Gaylord up to the shipping station.

• I would then drive the Gaylord into the marked area in the shipping station for it to be automatically wrapped.

• Once the Gaylord is completely wrapped it goes through a belt over to a machine that prints out a label for it.

• I would place the correct shipping label on the Gaylord and take it over to the dock and unload it.

• I would then grab another order list from my supervisor or complete direct orders from supervisor to do other various tasks.

Machine Operator/Packer

Deimling Jeliho Plastics - Amelia, OH

October 2015 to October 2017

As a machine operator/packer at Deimling Jeliho Plastics, I would operate a machine that produced plastic or rubber parts. I would run parts through the machine to certain company standards, while checking the machine and parts periodically, making sure of no defects or errors. After examining the final produced parts, I would count them and place a certain number of parts in each box and package them accordingly and place the boxes on their specific pallet until the order has been completely and successfully filled as expressed by the customers and my supervisor.

• Marked and packaged items.

• Assembled new products.

• Maintained a safe working environment.

• Responsible for cleaning work area.

• Took orders and packed items for customer's deliveries.

• Staged shipments.

• Ensured that all merchandise counts were in order.

• Set up tools and production areas.

• Operated various molding presses.

• Ensured the packaging material / inventory was accurate.

• Communicate with coworkers to make for a productive work environment. Education

Some College in Nursing

University of Cincinnati-Clermont College - Batavia, OH May 2006 to May 2007

Secondary School Education- in Medical Information Technology Grant Career Center - Bethel, OH

August 2004 to May 2006

High School Diploma

Felicity-Franklin Local High School - Felicity, OH August 2002 to May 2006

Skills

• Plastics Injection Molding

• Quality Inspection

• Materials Handling

• Manufacturing

• Heavy Lifting

• Quality Assurance

• Keyboarding (2 years)

• Data entry (2 years)

• Order Picking

• CNC

• Assembly

• Machining

• Warehouse Experience

• Picking & Packing (8 years)

• RF Scanner (4 years)

• Order Picker

• Microsoft Word

• CNC Lathe

• Stamping Press

• Shipping & Receiving

• Quality Control

• Cherry Picker (2 years)

• Pallet Jack

• Bartending

• Microsoft Office

• Accounts payable (2 years)

• Accounts receivable (2 years)

• Shipping & receiving (6 years)

• Electric pallet jack (2 years)

• Pallet jack (2 years)

• QuickBooks (2 years)

• Microsoft Excel (2 years)

• Medical billing (2 years)

• Medical coding (2 years)

• Transcription (2 years)

• Medical coding (2 years)

• Computer Operation

• Records management (2 years)

• Bookkeeping (2 years)

• Filing (2 years)

• Office Management

• Time Management

• Accounting

Contact this candidate