CURRICULUM VITAE

MY HIGHLIGHTS:

*.**** – ****: Project Engineer at Power Generation Add-on Combined Cycle Project (60 MW) “Cikarang Listrindo”, West Java-Indonesia as civil engineer in Silkar National Ltd.

2.1998-2000: Civil/Design Engineer and Supervisor Construction Engineer for Buildings (Villa, Warehouses, hotel Abu Saq etc.) Projects in Engineering Consultant - Saudi Arabia.

3.2003 – 2015: Qatar Energy – Ras Laffan & Mesaieed Industrial City Project as Designer.

4.2015 – 2020: Qatar Energy – Ras Laffan & Mesaieed Industrial City Project as Off Plot Engineer

5.2020 - 2023 : Al Tameer Engineering Consultant, Civil Engineer/Designer

6.2023 – Present : Caravane Earth, Construction Project Coordinator

Education :

Graduated Bachelor of Civil Engineering in 1996 from Indonesia Islamic University

Computer Proficiency & Programs:

Training HSE H2S, Fire Fighting and First Aid by QE

Training ARC GIS 1 & 2 by Qatar Urban Planning and Developing Authority

AutoCAD by North Atlantic University – Qatar Energy

AutoCAD Civil 3D by North Atlantic University – Qatar Energy

AutoCAD updated by North Atlantic University – Qatar Energy

MS Office (Word, Excel & PowerPoint)

MS Outlook

PDMS (Assai)

ECM Foundation

Correspondence Management System

EFSM (Kite works)

MME e-Building Permit System

Adobe Professional

Training Steel Structural Design (STAAD Pro, X-Steel) by Gunung Garuda Co.

Revit Structure/Mechanical by North Atlantic University – Qatar Energy

Primavera Project Planner by Trimitsa C

Adobe photoshop/acrobat writer

SACS v.12 for Offshore Structural Design

Technical Skills:

Possess Valid Qatari Driving License

Expert in computer design

References:

1. Mr. Abdulhameed Mansoor Al-Khaldi

Manager, Development Planning & Engineering - QE

Tel: 5533-3309

2. Omar Takriti

Lead Compliance Engineer

Tel: 5589-6930

Career Objective:

Experience in multi-discipline Engineering Design Consultancy Computer Aided Draughting / Design. Knowledge of 2/3 D model and Isometric software AutoCAD, Tekla Structure, Revit Structure

17 years work experience in Civil & Structural, Marine, Architectural and Building Services for the Oil & Gas / Petrochemical Industry.

Experience in the detailed design associated with oil and gas projects including, but not limited to, industrial, commercial and residential types of buildings and infrastructure projects, including highways & roads, water supply & drainage systems;

Familiar with Primavera Project Planner & Management to control cost and schedule construction works

Familiar with Drafting QE/and International Standard

Familiar with Primavera Project Planner: Activity Code, Cost Account, Adding Expenses, Assigning Resources, Budgeted Units, Assigning Resources Curves, Progress Update of Projects, earned Value Generation, reflection of the project,

Experience with Qatar O&G standards and local regulatory requirements, including AISC, Shell DEPs, Qatar Civil Defence requirements for Qater Energy/MME e-BP for DC1 and DC2, Qatar Construction Standards, etc

Al Taameer Engneering Consultant – June 2020 to Present

Structural & Civil Engineer/Designer for Projects

-National, Chemical and Petroleum Plant Projects with following responsibilities:

-Prepare Design and prepare structural drawings (reinforcement details) of Pump Foundation, Steel Platform for Gas Cylinder

-Pipe Layout, Pipe Rack Details

-Pump Shade

-Shop, Business and Building in Old Ghanim Project with following responsibilities:

-Review Bill of Quantity and Project Planning before starting.

-Reviewing an approved for the Shop Structural drawings, MEP drawings and calculation to ensure drawings do not clashing and base on DC2 approved construction

-Day to day monitoring the Contractor’s Construction Progress and performance in terms of Construction works, Safety, Quality, Cost and Schedule

-Manage the projects administration (drawings, standard and procedure, contract, materials submittal, etc)

-Responsible for monitoring construction personnel. coordination and monitoring the delivery of materials and site work fronts including batching plants/laydown sequence

-Responsibility to ensure the construction works to follow Qatar Construction Standard 2014 and MME standard & regulation

-Review and approve construction field to ensure all drawings (Drainage, Water, HVAC and Electrical) are not conflict with others utility

-Responsibility supervise works of contractor to follow Approved Drawing by MME

-Supervise Contractor for Structural works (Post Tensions Slab, Columns, Beams, steel structure and precast) & coordinate MEP to ensure all works based on approved drawings and as per QCS 2014

QATAR ENERGY (QE) –1 January 2015 to 6 June2020

Off Plot Permit Engineer with following responsibilities:-

1.Review technical drawing for to ensure that their projects off plot facilities as per QE standard & regulation, Kahramaa standard for the Electrical Cable route and crossing, Ooredoo standard,

-Gas pipeline (QE Gas Ditribution,, fuel jet gas pipeline, ),

-Electrical cable (Kahramaa Substation Projects),

-HV Cable route from MIC SS-2 to Medium Industries

-Ooredo Fibre Optic Cable Route for QE Gas Stations

-Access road for Qatar Steel

2.Review and Monitoring Work Progress Building Permits status the day to day and provide data for monthly reporting status of Project to management in Mesaieed Industrial City to Head of Compliance Engineer With following Projects approx. 350 Projects

-QAPCO (Qatar Petrochemical) Expansion Project

-QAFCO 6 (Qatar Fertilizer) Expansion Project

-Kahramaa Substations Project

-Warehouse, & Expansion of MPCL (Mesaieed Power Company) Project

-QCHEM (Qatar Chemical) Expansion

-Warehouse QATALUM Projects

-Parking Area for Qatar Steel Co.

-Light Industries Projects (Qatar Detergent, Smeet Precast Factory, KLJ Organic, QALCO, etc)

QATAR ENERGY (QE) – 29 September 2003 to 1 January 2015

Senior Designer

with following responsibilities

1.Updated Project Data with relevant geographic and engineering attribute information from multidisciplinary engineering drawings / documents in to ARC GIS of Ras Laffan Industrial City And Mesaieed Industrial City

2.Extracted Cad Drawings route of underground services (Electrical Cable, Oil and Gas Pipeline, Water Pipeline) in QNG/CGIS coordinate system from as-built engineering drawings to update Consolidated As Built Infrastructure Industrial City drawing.

3.Updated status As Built Drawing into Consolidated/Master As Built MIC & RLC above and underground utilities drawings with following as built drawings:

RLC

-GTC 183/ED/2004 : Ras Laffan Expansion Avenue

-GTC-106/ED/2006 : EPC Extension of Module Corridor Road & Phase II Support

-Common Cooling Water Pipeline

-GTC 160/ED/06 : EPIC For Support Service Area Phase-1, Site Development at New West Side of RasLaffan & Landscaping Phase I- Part II

-GTC 242/ED/05 : Road Extension Grading

-GTC 101/ED/01 : RC East SideSupport Service Area

-NFA QE Oil and gas pipeline from offshore to onshore,

-Kahramma Water pipeline & Electrical LV & HV Cable route

-Desalinated Water Pipeline

-Etc

-HV 220 kV cable route project fromRLPC to Main SS

MIC

-MIC Community Area (Roads, Underground Utilities, Buildings/Housing) under QP GC081200 Project

-Heavy?Light/Medium Industries Area (Roads, Underground Utilities, Boundary limits of Industries)

-GC11103600 - Southern Section of Sealine road

4.Update Land Use Plan/Corridors Drawing and Status of Leased area in Ras laffan Industrial City and Mesaieed Industrial City based on as built information and site survey for the new proposed development and existing Facilities for guidance contractors and Consultant

5.Participates in the review and preparation of standards and Prepare Area Tagging MIC drawing

6.Tagging assets of projects as requested from contractor,

7.Manage document control system in the project server and life link project archive

8.Reviewing drawing and document submittal from drawings as per CGIS coordinates system.

9.Prepare presentation of project progress and proposed project for management monthly report.

10.Preparing preliminary designs & conceptual drawings RLC Road Expansion Project (Khalifa St, Hamad St. etc) and West side RLC Area from the survey information according to engineering specifications in house projects.

11.Prepare design and drawings for inhouse projects as follow

RLC Gas Cylinder Storage Project (layout plan, elevations, sections and details)

Guard House

RLC Road Expansion Khalifa st and Hamad St.Project (layout plan, profile and)cross section

MIC Truck Parking (layout, plan and cross section)

Hazardous Waste Treatment Expansion Project

-Evaporation Pond

-H2o2 Chemical Storage

-Hazard Waste Paved Storage

-OWTF Tank And Details

-Piping layout, piping support, nozzle orientation

BANGUN TIRTATAMA (WAVIN) – June 2000 to Sept 2003

Project : Water Resources Kutai Timur Municipality of Sangatta Project in East Borneo, Indonesia with the following activities

1.Prepare Civil and structural design and shop drawings : structural, electrical, mechanical (isometric, p & id) drawings

2.Prepare structural drawings and budget, BOQ of Box Culvert Crossing Kalimalang River in West Java, Indonesia

3.Prepare structural calculation and shop drawings and budget, BOQ

Project : Tegal Trade Center –Central Java with the following activities

1.Prepare Architecture drawings 2D and 3D rendering

2.Prepare structural (Foundation, Colums, Beam & Slab Deails)

3.MEP drawings

AL Hussan Engineering Consultant – Saudi Arabia September 1998 to June 2000

Civil & Structural Engineer and Designer

with the following Projects

1.Abu Saq Business Center Building Project :

-Prepare Structural calculation & design drawings Architecture & Structural drawings (foundation, columns, Beams and details of reinforcement)

2.Najran Municipality/Baladiyah Water Resources Project

-Prepare As Built Drawing (layout of water pipeline, Details Manholes, etc)

3.Villas in Najran Area Project

-Architecture, Civil and Structure, MEP Design Drawings

SILKAR NATIONAL LTD– since 8/3/1997 to 30/9/1998

Civil and structural Engineer/designer

Project : ADD ON COMBINED CYCLE POWER PLANT PROJECT “CIKARANG LISTRINDO with the following activities:

1.Prepare and produce Shop Drawings Steel Structural, design and drafting Steel Structure,

2.Foundation,Reinforcement Detail fro Column & Beam,Piping Plan,Mechanical Tank Drafting 2D and shop drawing steel structural (Details connection, Beam and Column)

3.Visit site to check and ensure material steel structure delivery are correct.

4.Prepare Weekly Progress and Monthly report of project

5.Day to day monitoring the Contractor’s Construction Progress and performance in terms of Construction works, Safety, Quality, Cost and Schedule

6.Manage the projects administration (drawings, standard and procedure, contract, materials submittal,etc)

7.Responsible for monitoring construction personnel. coordination and monitoring the delivery of materials and site workfronts including batching plants/laydown sequence

8.Responsibility to ensure the construction works to follow Indonesia standard & regulation

SLAMET WIJANARKO

Mobile: +974-********, Email: ad2h19@r.postjobfree.com

Local Address:

Building 8, Zone 35, Street 185, Doha, Qatar

Date of Birth: Nationality : Indonesia Visa Status: NOC/Transfer

01/07/1971 Address Origin Country : Cenderawasih St. No.23 Kebumen-Indonesia

Contact this candidate