Spray Painter Hazardous Waste

Resume of James Harwood

**** ****** *** *** ***** 904-***-****

Skills:

Skilled Spray painter with 8 years of painting experience. Proficient at preparing surfaces for painting ito include Sanding, Masking, Filling, Re-sanding, Priming with two-part epoxies and Urethane finishes.

Extensive experience with base coat, clear coat, 2-part urethane paints. Able to mix paints, thinners, reducers, and accelerators in accordance with manufacturers specifications.

Capable of running a paint booth and curing ovens. Removing old paint filters and storing old paint in appropriate containers.

Knowledgeable with laws and regulations pertaining to the handling, use and disposal of hazardous waste.

Military Experience:

Boatswain Mate. USCG Stationed: Barnegat, New Jersey.

Search and rescue missions. Worked on Steel, Aluminum, and Fiberglass boat painting. Along with daily work and production duties I was also responsible for a crew of six people.

Experience:

Freelance Subcontracted Painter 10/19 – Current

Painter

Painting walls, equipment, buildings, bridges, and other structural surfaces, using brushes, rollers, and spray guns.

Applying paint, stain, varnish, enamel, and other finishes to equipment, buildings, bridges, and/or other structures, using brushes, spray guns, or rollers.

Applying primers or sealers to prepare new surfaces, such as bare wood or metal, for finish coats.

Calculating amounts of required materials and estimate costs, based on surface measurements and/or work orders.

Covering surfaces with drop cloths or masking tape and paper to protect surfaces during painting.

Filling cracks, holes, and joints with caulk, putty, plaster, or other fillers, using caulking guns or putty knives.

Mixing and matching colors of paint, stain, or varnish with oil and thinning and drying additives in order to obtain desired colors and consistencies.

Reading work orders or receive instructions from supervisors or homeowners in order to determine work requirements.

Tyonek Native Fleet Readiness Center S.E. Jacksonville, FL 5/19 – 9/19

Painter

Spray painted air craft and helicopter components in support of F-18, P-3, P-8, and SH-60 programs.

Mixed and sprayed 2 part urethane paints, water borne primers, epoxy primers, and base clearcoat paints.

Trained in and was responsible for disposal of liquid and solid hazardous waste.

Immediate Supervisor – Micheal Teel, 904-***-****

Proxair Surface Technologies Manchester, CT 5/18 – 4/19

Painter

Sprayed specialty coatings for aircraft engine parts (slurry coating) while maintaining specific manufacturer tolerances, conducted thickness recordings pre and post paint, and performing curing/baking process of parts as well as sand and media blasting for initial stripdown.

Mixed and sprayed epoxy primers and 2 part urethane paints for various vendors. painting,

Immediate Supervisor – Jim Thor, 860-***-****

Kaman Aerostructures Jacksonville, FL 3/17 – 4/18

Painter

Primed & painted cockpits, center sections, exterior skins, painted helicopters blades, various assorted parts and conducted QC and rework modifications on SH-60 Blackhawk helicopters.

Immediate supervisor - Bob Greenstreet, 904-***-****

Bell Power Systems Essex, CT 12/17 - 4/18

Painter

Stage new engines, disassemble mask and paint, reassemble engines, prime and paint associated parts and sub-assemblies.

Other duties, painted with two-part epoxy primes, two-part urethane paints.

Changed booth fitters, maintained paint inventory, and recorded all paint waste.

Prime Painting, Inc., Chicopee, MA 8/15 – 11/17

Painter/Spray Gun Painter

Primed and painted steel, aluminum, wood, doors, windows, walls and equipment.

Painted with epoxy, urethane, latex and waterborne paints and primers

Maintained spray equipment and inventory

Sandblasted steel and aluminum when necessary

Maintained a clean safe work environment

Kaman Aerospace Corporation Middletown, CT 1/2013 – 7/2015

Painter

Prepped and painted helicopter fuselages, all internal external parts and helicopter blades.

Jamestown Boat yard 2/2011 – 1/2013

Painter

Prepped Primed and Painted Swan sailboats and other makes and makes

Performed fiberglass repairs, blister bottom repairs, sprayed bootstripes, cabin cockpits, superstructure assisted painting topsides. Sanded/Faired, keels, rudders and racing bottoms.

Sprayed Aircrafts for various contracting companies including: Aucraft Aircraft repair. Myrtle beach South Carolina, Strom Aviation. Macon Georgia, Eclipse Aviation. Albuquerque New Mexico, Cloud Nine Aircraft Refinishing Jacksonville Florida, Caterpillar Equipment Jacksonville Florida

Prepped and painted raw steel parts, Sprayed epoxy, primer and urethane finish coats

Sandblasted, and moved parts with forklift

Contact this candidate