MICHAEL A. CONLEY

*****-*** ***

Pleasant Prairie, 53158

262-***-****

Human Resources Department,

I am seeking employment and I want to find a company that has long-term career opportunities.

I learned through an employment agency that your company might be interested in a maintenance manager. I believe that my training, schooling, and ability to finish the job will make me an excellent candidate for this position.

Presently, I am working for master services as a residential and small commercial heating an air conditioning technician. In addition, I worked at Fair Oaks Farms as a maintenance supervisor in the food industry; Where, I directly supervised between 8 to12 guys and managed various mechanical modifications Furthermore, I worked at CMS mechanical as a commercial HVAC service technician. I also worked as a service technician at PBBS Equipment Corp; Where, I gained a lot of experience with large boilers and commercial building management systems. Before working for PBBS, I worked for Rosenthal heating and cooling. Additionally, I gained some experience with restaurant equipment sales, service and auctioning in Colorado. During all of my employment and education, I accumulated great knowledge in multiple mechanical applications and I gained the leadership skills necessary to pursue and complete a job professionally and efficiently. Over the years, I have learned How to use a wide variety of hand tools and power tools safely and properly; Such as, Rigid pipe machines, cutters, and multi- meters. Moreover, I have become very good in Brazing and soldering and I can read most schematic diagrams. I have work on large variety refrigeration units up to 300 tons including ammonia systems.

Before, going to school I worked as under ground utilities construction worker, where I received training in confined space entry, NFPA 70 fire protection and I used heavy equipment like back hoes, trenchers, large portable compressors and large winch lines to pull conduit, telephone lines and fiber optics.

On May 22nd 2007 I graduated from Gateway Technical College in Kenosha, WI. with an A.A.S in Heating Ventilation Air Conditioning and Refrigeration (HVAC/R). After school I pursued license for EPA 60, ASOPE 3rd class and Ammonia Refrigeration license. I have enclosed a copy of my resume for your review. I would like a career opportunity with your company or an opportunity to speak to you in person. If you have any questions Please call or email Mike 262-***-**** or ad2ap0@r.postjobfree.com

Sincerely,

Michael A. Conley.

MICHAEL A. CONLEY

11336-4th Ave Pleasant Prairie Wis. 53158

262-***-****

Objective: To secure a fulltime position as a HVAC Tech.. Employment:

4/16-current Building waters Hvac 2101 Lathrop Ave. Racine Wisconsin 53405.

Cold Knight Home Comfort. Pleasant Prairie, Wisconsin. 04/05/15-Current

1/15/14- 10/25/15 : Fair Oaks Farms 8922-102 Ave Pleasant Prairie, WI

3/2012 11/2012. CMS mechanical services 445 West Drive Melbourne, FL. 32904

800-***-****

9/2011-3/2012 Kenosha plumbing and heating 4421-Sheridan rd Kenosha Wis.

10/09- Present Amergegentcy Heating and AC, Kenosha Wi 4/07-10/9 PBBS equipment corp. Menomonee Falls Wisconsin

--Boiler service tech.

4/06-4/07 Rosenthal heating and cooling 104 Main St Rochester Wi

--Service Tech/ Installer. 262-***-****

01/05-04/07 Student at Gateway Tech College Kenosha,Wi 8/04-1/05 Finn Christensen: 1802 Winthrop Ave. Racine WI.

--Sewer/water/Basement waterproofing/ Drain tile

replacement.

2/01- 8/04 Parker Plastics: 9801 109th Kenosha, WI,

--Maintenance and plastic setup and molding operator. 8/95-2/01 A.A Liquidation 3939 Newport Blvd Denver, Co.

--Maintenance and Sales.

Experience: --Soldering and Brazing: 95/5 Tin Alloy, Silver Soldier, Copper Phosphorous.

--Refrigeration Tools Manometers, Multi-meters,

Thermometers for

Delta-T, Refrigeration’s Gauges High and low Pressure, Recovery Units,

Vacuum pumps, Micron Gauges, Scales.

--Sheet metal: Pittsburg Joints, Ductwork Bending and Cutting, Shears, Breaks, Pounded Caps, Ess and Drives for Connections, Transitions.

--Power tools and Hand tools: Jack Hammers 60 and 100 LBS, Concrete Core Drills, Hole Hog, Saw-All, Rigid Pipe Threaders, Nail and Rivet Guns, Remington Load Guns and All Basic Hand Tools.

Food industy

I worked directly with USDA and I am familiar with the standards and requirement.,

Initiated and managed several facility improvements to increase Safety, Productivity, and comfort.

Reduced energy cost for utilities by installing and maintaining boiler controls

Our team helped Increase productivity over 2 years by 40000 lbs of meat a day

Contributed to Decreasing maintenance downtime from 18000 minutes to 11000 minutes in 2 years..

Ammonia experience and license.

Initiated maintenance training and certifications for continuous improvement.

Hands on experience:

--Troubleshooting and installation experience 1, 3 Phase AC/DC Drive Motors and pumps for chillers, and blow molding machines.

--Maintained Pneumatics and Hydraulic Systems, Directional Controls, Valves and Cylinders.

--Horizontal and Vertical Saws, Various C.N.C and N.C Lathes and Mills Drill Presses, Calipers, Micrometers, Depth Indicators.

--Recent class in Wire Feed Welding .032 and .045 Flex Core and Strait Wire

Fork Truck and Lift Truck Operation,

--Extrusion Molding and Blow Molding Set up and Operate 12 cavity SIG, Sidel 2 and 4 Cavity Blow Molders, Comec 4 and 6 Cavity Continuous Extrusion Molders with Uniloy Controls.

--Repaired and maintained all Conveyers, Plastic Grinders, Directional Controls, Valves, and Cylinders.

Education/ Gateway Technical College, Kenosha, Wis. Graduated May 22, 2007 with

Certifications A.A.S. in Heating Ventilation and Air Conditioning Refrigeration HVAC/R.

Universal EPA certification

ASOPE license 3rd class.

NFPA-70 and confined space training

Cleaver brooks electrical and service training

Certifications.

Ammonia Refrigeration Operator 1

Contact this candidate