Kalop King

CDL Class A Driver

Tyler, TX *****

ad27l0@r.postjobfree.com

+1-903-***-****

Work Experience

Janitor

Cloud Cleaning - Tyler, TX

April 2023 to Present

Forklift Operator/Loader/Unloader Shipping and receiving Wastequip - Tyler, TX

February 2022 to Present

Load trucks in shipping and receiving incoming deliveries of stock and operate forklifts and order picking machines which allow them to retrieve and store stock in high places.utilize a forklift to move raw materials, parts and finished goods throughout the plant and provide support in multiple departments

•

Receive, verify and stock incoming raw materials

•

Supplying production with materials and parts as required to meet production demands

•

Transfer finished goods to holding and/or loading areas

•

Perform safety inspections and simple routine maintenance to ensure tools remain safe and fully operational

•

Maintain a safe work environment and wear required PPE at all times

•

Ensure that work place is maintained in compliance with 5S standards. Shipping and inspection checklist Ready Mix Truck Driver

Contractor's Supplies Inc - Tyler, TX

May 2019 to Present

Drive ready mix truck 6 days a week with alternating schedules. I'm responsible for carrying cement to multiple work sites and pouring the cement wherever requested, keeping truck clean and logging in work book everyday. Essential duties and responsibilities listed on the performing a pre and post-trip check to ensure safety and working of the truck, documenting any maintenance as required; backing truck under loading hopper and starting the mixer to get concrete, driving a truck to a job site !The concrete mixing transport truck maintains the material's liquid state through agitation, or turning of the drum, until delivery. ... In one rotational direction, the concrete is pushed deeper into the drum. This is the direction the drum is rotated while the concrete is being transported to the building site!Met 5 percent of delivery goals Requirements

• Performs daily preventative maintenance, record and inspection on vehicles to include fueling, cleaning, tire/light inspection, checking and adding fluids as needed.

• Uses water hoses to clean mixer between loads.

• Performs pre-trip and post-trip inspections.

• Assist maintenance with repairs as needed.

• Visually inspect the consistency of concrete in mixer.

• Communicates and directs coworkers verbally either directly, through two-way radio or hand signals.

• Provides appropriate documentation on delivery tickets.

• Ensures all delivery tickets are signed and returned.

• Exercise good judgment regarding work site access, unloading and operation to and from work site.

• Maintain good customer relations. Act in a professional, courteous manner.

• Maintain a professional appearance.

• Assists in training of co-workers as needed.

• Demonstrate good knowledge of lock out/tag out procedures.

• Demonstrate a good working knowledge of Rules and Regulations and assures facility compliance with OSHA, DOT, EPA and other regulatory agencies.

• Required to follow all safety policies and procedures.

• Performs other duties as required.

Maintained and documented changes to fleet equipment. Completed daily drivers log!

• Safe driving is my top priority for me and as well as the company I work for

• Focus- I must stay focused for extended periods of time

• Responsibility

• Organizational

• Mechanical knowledge

• Cleanliness

• Learn from others.

Material hand / driver

Legacy Measurement Solutions - Tyler, TX

April 2018 to November 2018

Assist in reviewing pick sheets based on customer orders and then pulling the right products for each order. Work closely with the inventory group to monitor supply levels and submit purchasing recommendations on a regular basis. Load and unload delivery trucks and make sure that each incoming delivery matches the company purchased order. I also collaborated with the inventory control department and purchasing groups to determine when product is missing from a delivery.Maintains inventory by identifying, labeling, and keeping materials and supplies in stock, recording location of inventory, and reporting shortages. Locates materials and supplies by pulling and verifying materials and supplies listed on production orders.Experience maintaining inventory and working in shipment areas. A Material Handler should exhibit excellent stamina, time management skills, and good inventory control skills. Experience on heavy duty forklift !

Warehouse Worker/Forklift Operator/Machine operator Kent’s Water Sports - Tyler, TX

January 2014 to May 2018

• Unloading materials and merchandise from incoming vehicles and stacking them to assigned placement. Locating and moving stock of products to pallets or crates for storage or shipment. Identifying damages and report shortages or quality deficiencies. Has forklift and reach truck certificates.Experience maintaining inventory and working in shipment areas. A warehouse worker should exhibit excellent stamina, time management skills, and good inventory control skills.

• Heavy duty forklift / terrain forklift experience

• Picked, packed, and shipped items

• Made sure all items were clean

• Maintained a safe working environment

• Inspected equipment

• Staged orders

• Die cut machine operator, responsible for operating a press, feed materials into machine.Forklift Operator responsibilities include:

Unloading materials and merchandise from incoming vehicles and stacking them to assigned places. Locating and moving stock of products to pallets or crates for storage or shipment. Identifying damages and report shortages or quality deficiencies

Janitorial Worker

Office Pride Commercial Cleaning Services - Tyler, TX January 2014 to July 2017

in charge of keeping the workplace clean, organized and disinfected. usually have the following responsibilities:

• Clean the interior of buildings including floors, carpet, rugs, windows and walls

• Disinfect commonly used items like desks, door handles, office tools and phones

• Maintain cleaning inventory, placing orders for new products when needed

• Maintain outdoor grounds, cut grass and trim bushes

• Remove debris and snow from sidewalks

• Replace air filters and maintain HVAC systems

• Empty trash and recycling bins.

• Good communication skills

• Knowledge of various cleaning products and when to use them

• Ability to clean and disinfect various surfaces

• Ability to lift and move at least 50 pounds

• Good organization skills

• Knowledge of safety guidelines when working with chemical cleaners

• Excellent time-management skills can operate global industrial sweeper ! Auction Supervisor

Goodwill Industries - Tyler, TX

June 2009 to December 2013

Responsible for submitting and completing bids to an existing or prospective client, on time and within budget. Ensure that all the clients questions have been answered as fully as possible, and that the organization has given itself the best possible chance of success. First point of contact for the client and liaises with estimators who produce the price element of a bid.

• Created work schedules

• Managed 40 employees

• Responsible for managing department budgets

• Consistently achieved profits Average was 5700 a month

• Assisted with hiring and training 15 employees

• Created work schedules

• Collected payments and managed accounts receivable .Osha Safety Trained

• Start with a Specific, Measurable Goal.

• Personalize to the Individual.

• Adapt to Find True Need.

• Promote Continuous Awareness. Responsible for batching time of reports Class b Cdl hand crew

Striping Technology - Tyler, TX

January 2007 to July 2009

responsible for various duties on a construction project such as, but not limited to, directing traffic in or around construction work zones, shoveling, and raking. Responsibilities

• Ensure a safe work environment in compliance with all safety policies and procedures using the appropriate tools and equipment for the task

• Prepare pavement for paint and assist in installing signs

• Paint long and short lines on pavement

• Assist crew with various duties such as; shoveling and raking, running wheelbarrow, safely backing/ dumping trucks

• Signal operators to facilitate alignment, movement, and materials with a shovel

• Lift, carry, and hold materials, tools, and supplies

• Assist in the placement, moving and dismantling of signs, barricades, cones, and other traffic control devices

• Be kind and courteous to traveling public, pedestrians, and co-workers

• Follow direction of Foreman as to daily tasks and expectations for each specific project or jobsite

• Regular and predictable attendance at assigned times is required

• Other duties as may be assigned. Equipment used

• Air Blower Grinder Hot bitimus machine

• Power Washer or Blaster (water/sand/shot) ...

• Drum-style Scarifier (Groover/Shaver/Planer) ...

• Rotary-style eraser. ...

• HEPA Dust Extraction. ...

• Inspection tools, ASTM,Responsibilities • Properly load and unload materials from trucks and trailers by hand and forklift

• Operate large and small vehicles

• Effectively Operate the following Vehicles/Equipment: hand machines, fork lift,

• Install Preformed Thermo

• Complete DVIRs and Daily Logs correctly for CDL Drivers

• Follow all Safety Policies and Procedures All other duties as assigned Working Conditions

• Regularly required to stand/walk; reach with hands and arms; climb or balance and stoop; and kneel,

• Regularly lift and/or move up to 50 pounds

• Occasionally lift and/or move more than 100 pounds

• Regularly exposed to outside weather conditions; moving equipment and machinery parts; moving traffic, and fumes and airborne particles

• Noise level of the work environment is usually moderate/loud Education

Two semesters of college in Business Management

Tyler Junior College - Tyler, TX

August 2005 to January 2006

High school diploma or GED

Commercial Driver's License (CDL)

Class A

Expires: January 2025

State: TX

Skills

• Microsoft word and excel! (10+ years)

• Warehouse (10+ years)

• forklift (10+ years)

• Inventory Control (5 years)

• shipping

• Cdl Driver (2 years)

• CDL

• Flatbed (2 years)

• Cdl-A (2 years)

• Reach Truck (5 years)

• Load & Unload (10+ years)

• Order Picker (10+ years)

• Pallet Jack (10+ years)

• Heavy Lifting (10+ years)

• Basic math (10+ years)

• Freight Experience (5 years)

• Tractor-Trailer (1 year)

• Box Truck

• Commercial driving (3 years)

• Sales

• English

• Customer service (5 years)

• Delivery Driver Experience

• Pricing

• Assembly

• Packaging

• Tanker Experience

• Forklift (10+ years)

• Mechanical knowledge

• Warehouse Supervisor Experience (3 years)

• Shipping & Receiving (5 years)

• Machining

• Heavy Equipment Operation (Less than 1 year)

• Merchandising

• Order Picking (5 years)

• Materials Handling

• Manufacturing

Certifications and Licenses

CDL Class A or B

Driver's License

Forklift Certified

Present

Air Brake Endorsement

Assessments

Work style: Reliability — Proficient

August 2021

Tendency to be reliable, dependable, and act with integrity at work Full results: Proficient

Indeed Assessments provides skills tests that are not indicative of a license or certification, or continued development in any professional field.

Contact this candidate