Martin Mccamey
CDL A /Equipment operator/mechanical Maintenance
Athens, TX 75751
ad1uf2@r.postjobfree.com
Motivated by a desire to improve crafted skills to ensure sufficient production. I thrive on perfection, problem solving and innovation.
My desire is to advance my diverse skills and knowledge into a more specific field of expertise.
My background consists of carpentry,pipe fitting welding,fabrication, equipment operations and mechanical maintenance
And repair of diesel engines,pumps,hydraulics and other construction/oilfield equipment. CDL A w/tanker endorsement 2018
1year construction equipment w/cdl
1year OTR w/CDL
1 year oilfield w/CDL
I obtain interpersonal skills, ability to perform tasks without supervision as well as a team player. Problem solving and task completion while maintaining safety precautions and trained procedures.
I HAVE BEEN IN THE INDUSTRIAL CONSTRUCTION,OIL/GAS INDUSTRY SINCE 2000 I have been in and around construction for 22 years. I find gratitude in hard work, Martin C. McCamey
Authorized to work in the US for any employer
Work Experience
Driver CDL-A
Bardwell Trucking, Inc. - Ennis, TX
September 2022 to Present
Drive 4 axle,18 speed tractor/ trailer
Flatbed(53', stretch-deck(53'-75') and 4 axle rng (lowboy 53') Manual load, crane-load construction and Railroad equipment and deliver to designated locations. Solids Control Operator
DCM All American Oilfield Services - Dallas, TX
January 2022 to Present
Maintain and operate equipment such as;
Centrifuges, feed pumps, trash pumps,progressive cavity pumps etc. Dryer shakers,dewatering system, well completion/sandcat,excavator/loader To move solids waste into reserve, end dump trucks, and roll-off boxes Communicate with clients about daily operations and equipment status. Daily reports of equipment inspections and drill mud. CDL/ Equipment Operator
Park's Construction llc - Gun Barrel City, TX
September 2020 to November 2021
Drive bobtail truck with
35' roll-off trailer/winch. (dual tandem)
Deliver bins to job sites and customers
Haul materials and equipment to job locations.
Operate, maintain and repair dump truck,track hoe, skid loader, dozer, forklift and other equipment as needed.
Class A Flatbed Driver
Southern Freight Lines - Midland, TX
December 2019 to July 2020
Haul oilfield equipment and materials to various locations in the Permian Basin and New Mexico. (Rig moves)
Haul flatbed freight OTR
CDL Driver Class A / equipment Operator
Permian Separators - Stanton, TX
January 2018 to November 2019
Offload vacuum trucks into frac and storage tanks. (Rotate frac tanks as emptied, with winch truck) Run BS through centrifuge system to reclaim Raw oil product and separate water and solids. Load solids into end dump for disposal.
Pump waste water into company vacuum truck and take to disposal. Maintenance all machinery, trucks, heavy equipment and repair as needed. Maintain daily logs, tank levels, and reports for company management Operator Technician
5-star solids control Services - Midland, TX
January 2016 to December 2017
Maintain and operate solids control equipment to maintain drill mud properties. Operate track hoe and loader to dispose of waste.
Report daily to management and client of any issues and daily activities Field/equipment Operator
Natiinal Oilwell Varco - Odessa, TX
June 2014 to March 2016
Rig up/rig down/operate/maintain track hoe, backhoe,articulated loader, forklift, gensets and trash- pumps
Ensure proper functioning of all equipment before oil base drilling. Maintain equipment, centrifuge (barite recovery and high-speed) pumps,VFD,dryer shakers and excavator while drilling well.
Log in daily fluids recovered/altered
Pipefitter/ fusion tech
CCJV - Westlake, LA
April 2013 to May 2014
Interpret ISO's and build spool pieces accordingly. Operate fusion machine for HDPE pipe 4"- 30" underground Operator/equipment Operator
LDI Services, LLC - League City, TX
August 2011 to March 2013
Haul heavy equipment, tools and materials to construction site. Operate, maintain and repair heavy equipment as needed. Const./extraction
Closed loop operator
Dynamic Energy Services - Midland, TX
February 2012 to May 2012
Maintain dryer shakers, centrifuges, pumps and excavator to ensure proficient operations. Rig up equipment for drilling fluids recovery and disposal. Service equipment between wells,report equipment failure and make repairs as needed . Communications with service technicians providing knowledge of the equipment. unlicensed engineer
SHEARWATER MARINE - Morgan City, LA
February 2009 to August 2011
DUTIES INVOLVED - diagnose fuel, water, pneumatic, fire and hydraulic systems involved in the proper functioning of retired marine coast guard vessels
troubleshoot, repair, and perform mechanical maintenance of pumps, fire monitor, bearings and diesel engines. Observe all piping systems, cut out, replace valves, damaged spools, flanges or fitting involved in the function of vessel's duties OBJECTIVE: to progress mechanical skills as well as my experience as a pipe fitter. To be a part of the revamping of historical coastguard cutter vessels which were deemed un seaworthy by the United States Coastguard.
deckhand/equipment maintenance
TRAYLOR BROTHERS INDUSTRIAL CONSTRUCTION - Galveston, TX 2002 to 2004
Galveston Tx.)
(demolition and new construction of the Galveston Causeway Railroad Bridge) POSITION HELD - deckhand/equipment maintenance
DUTIES INVOLVED - responsible for managing all mechanical, pneumatic, hydraulic, and electrical control systems to ensure minimum downtime and improve production of work vessel duties
OBJECTIVE: to enter the industrial construction and develop a professional career Carpenter/skilled labor
DOCKSIDE CONSTRUCTION - Dickinson, TX
1997 to 2001
POSITION HELD -general skilled labor
DUTIES INVOLVED - select materials, measure precise distances and angles for cutting materials involved for installation using fasteners, brackets, hangers or adhesives to construct desired structures.
Maintain barge, drop-hammer vessel and all tools / equipment necessary for task maintain a safe work environment for all employees WORK HISTORY (CONTINUED)
Education
High school or equivalent
COOPER HIGHSCHOOL - Abilene, TX
Skills
• Mechanical repair/maintenance (10+ years)
• pipefitter (4 years)
• safety procedures. (10+ years)
• Boilermaker/mechanical bolt up (5 years)
• Solids contril operator (6 years)
• Equipment operator/maintenance for track hoe,backhoe,articulated loader,tower crane, boom crane,lift,other light -heavy equipment (10+ years)
• CDL A/ Equipment Operator (3 years)
• Cdl-A (5 years)
• OTR (1 year)
• Flatbed
• Construction Experience
• Driving
• Tractor-Trailer
• Tanker Experience
• Diesel Engine Repair
• Commercial Driving
• Freight Experience
• Facilities Maintenance
• Hydraulics
• Equipment Repair
• Delivery Driver Experience
• Loader Operation
• Forklift
• Carpentry
• Welding
• Risk Analysis
• Electrical Experience
• Landscape Maintenance
• Backhoe operation
• Automotive Repair
• Brake Repair
• Lawn Care
• Heavy haul
• 4G/LTE
• Time management
• Tanker
• Water truck
• Maintenance
• Heavy equipment operation
• Computer literacy
• Oil & gas
• Farming
• Construction
• Communication skills
• Rigging
• Microsoft Office
• Organizational skills
• Air brake
• Mechanic Experience
• Suspension
• Blueprint Reading
• Handyman
• English
• Truck driving
Certifications and Licenses
Class A CDL (tanker)
March 2017 to March 2025
Commercial Drivers License w/Tankers endorsement, DOT medical card PEC, H2S, HEAVY EQUIPMENT OPERATOR,
FIT TEST
CDL Class A
Class A CDL
March 2018 to January 2023
Tanker endorsement
Driver's License
Air Brake Endorsement
Additional Information
SKILLS
proficient with all hand tools
pneumatic tools (torque, rams, presses)
proficient with all power tools
gas powered tools
light-medium, heavy equipment operator (track-hoe, back-hoe, trencher, tower crane) Tractor trailer
mechanical maintenance
Troubleshoot
Mechanical repair
Diesel/gas engine
Pump repair
Initial alignment
bolt-up procedures
basic rigging and safety
safety procedures
interpreting isometric drawings and P&ID
fabrication of structural, piping and storage tanks valves and fittings
final walk down with clients and engineer
land survey instrumentation (topological, conventional and GPS) soil compact
scaffold safety
risk analysis