MIRAMBEK ATAUSHIYEV

Phone: +1-832-***-****

Email: ad1ilb@r.postjobfree.com

EXECUTIVE SUMMARY

More than 28 years total working experience in oil & gas industry.

Drilling Supervisor – Consultant in Ukraine. Gas wells sidetrack project.

Drill Site Manager – Consultant for Chevron in West TX. Delaware ranch horizontal project. Unconventional resources, lateral length - 10,000'

Drilling and Workover Supervisor for Kuwait Oil Company – I was the only Company man on location. Drilled 10 wells from single pads. All wells were directional.

I was a Drilling & Completions Engineer and I supported operations in West Texas (Drilling). Unconventional resources, lateral length - 5,000' - 7,500'. Also, I supported operations in East Texas horizontal project, ~1500’ lateral length.

I worked as a Completions / Remedial Engineer and as an Operations Drilling Engineer and supported all aspects of workover operations in East TX, Panhandle, Oklahoma, Kansas and drilling & completion operations in Wyoming and Colorado. Workover projects: recompletions, fracturing, flowback, replacing tubing, replacing rods and rod pumps, replacing ESPs, plugging and abandoning, etc.

As a Drill Site Manager, I supervised drilling/workover/completion operations onshore in Tengiz and Korolev fields in Kazakhstan and offshore on Gulf of Thailand.

In Kazakhstan type of operations included drilling wells with large land rig and completing them as a single completion to 5500m (~18,000 ft). All wells were vertical. The high pressure, sour gas environment. Utilized mud cap drilling technology to drill through a severe loss circulation zones. Workover operations included replacing tubing, milling and recovering packers, sidetracking, deepening.

In Thailand I worked offshore on jackup rig, all wells were directional (development and exploratory). Batch drilled 16 wells from a platform. Depth of the wells were 12,000 ft with high temperature. Completion types were Mono-trip gas lift and standard monobore. Work included various types of drilling fluids.

QUALIFICATION HIGHLIGHTS

10 years of experience as a Drilling/Completions/Workover Engineer for major company.

More than 10 years of experience as a Drill/Well site manager.

Drilled deep vertical wells in high pressure, sour gas environment. Utilized mud cap technology. Deepened old wells to high pressure sour gas horizons. Drilled directional wells from one platform in factory drilling environment and simultaneous operations.

Designed drilling programs for vertical, directional and horizontal wells. Utilized landmark software to design well programs.

Utilized Risk assessment process to identify hazards prior to drilling wells as well as during operations.

Completion of wells including fracturing and flowback operations.

Workover and P&A programs.

Experience to decrease operation costs.

PROFESSIONAL ACCOMPLISHMENTS

Drilling & Completions Engineer. Successfully completed drilling part of 13 wells in two different projects, up to 7,500’ laterals. Achieved savings - 5.5% of planned cost. Achieved average 8% savings of planned cost on responsible workover projects. Successfully completed drilling part of 2 wells in East Texas Horizontal Project. 1500’ lateral length. Achieved savings - 8% of planned cost and 2 days less than planned.

Completion/Remedial Engineer. Worked with 10 production engineers to support workover operations in East TX, Panhandle TX, Oklahoma & Kansas. Achieved incident free operations for all projects and 3-5% savings of planned cost. I was replaced by three engineers, helped them to transition in short period of time.

Operations Drilling Engineer. Successfully designed and supported operations in Wyoming and Colorado. Achieved savings - 9% of planned cost.

Successfully performed in each project as a Drill/Well Site Manager.

WORK EXPERIENCE

2019, November –2021, September

Drilling Supervisor – Consultant

Halliburton

Location: Ukraine – Poltava and Kharkov regions.

Responsibilities:

Supervise on-site drilling operations. Give work direction to contractors to accomplish objectives of the well work program.

Manage drilling support inventory requirements and transportation of all equipment for on-site operations. Utilize company and contractor resources to ensure all equipment and material are procured and on location when needed.

Report daily operations and all associated supporting reports.

Provide support and serve on project teams as required. Work with Drilling Engineer to identify and implement process improvements, including drilling optimization.

Contribute to maintain an incident free operation.

2019, February – 2019, October

Drill Site Manager - Consultant

Chevron (MidContinent BU)

Location: Delaware Ranch field, West Texas, USA

Responsibilities:

Supervise on-site drilling operations. Give work direction to various service personnel to accomplish objectives of the well work program.

Use various engineering tools to design and apply technical requirements of the well work program, including applied hydraulics, drill string design, well control calculations, tubing movement considerations, cement placement design, etc.

Manage drilling support inventory requirements and transportation of all equipment for on-site operations. Utilize company and contractor resources to ensure all equipment and material are procured and on location when needed.

Report daily operations and all associated supporting reports. Perform accounting functions for cost control and material / equipment management for each well.

Provide support and serve on project teams as required. Work with Engineers and Drilling Superintendent to identify and implement process improvements, including drilling optimization.

Contribute to maintain an incident free operation which is in support of and in compliance with Company Protecting People and the Environment policy. Responsible to lead and fully administer the safety program on-site including training assurance, safety meetings, assurance procedures, incident investigations, drills and preparation of all required reports.

2016, September – 2019, February

Drilling and Workover Supervisor

Kuwait Oil Company

Location: Burgan field

Responsibilities:

Supervise on-site drilling / completion / workover operations. Give work direction to various service personnel to accomplish objectives of the well work program.

Use various engineering tools to design and apply technical requirements of the well work program, including applied hydraulics, drill string design, well control calculations, tubing movement considerations, cement placement design, etc.

Manage drilling support inventory requirements and transportation of all equipment for on-site operations. Utilize company and contractor resources to ensure all equipment and material are procured and on location when needed.

Report daily operations and all associated supporting reports. Perform accounting functions for cost control and material / equipment management for each well.

Provide support and serve on project teams as required. Work with Engineers and Drilling Superintendent to identify and implement process improvements, including drilling optimization.

Contribute to maintain an incident free operation which is in support of and in compliance with Company Protecting People and the Environment policy. Responsible to lead and fully administer the safety program on-site including training assurance, safety meetings, assurance procedures, incident investigations, drills and preparation of all required reports.

2013, January – 2016, June

Drilling & Completions Engineer

Chevron (MidContinent BU)

Location: Houston, Texas, USA

Responsibilities:

Drilling / Completions / Workover program design & execution in East and West TX.

Direct efforts to ensure engineering effectiveness of drilling, completions and workover operations and that cross-functional project objectives are achieved.

Equipment forecasting and procurement

Vendor evaluation and selection

Material purchase

Manage look-back process

Monitor daily rig operations

Develop program changes to support execution

Coordination of pre-rig work for rig scheduling and well category identification

Provide technical support for operated wells

Identify HSE considerations for operations and include in detail in written procedures

Assist in training/mentoring younger employees

2009, March – 2013, January

Completions / Remedial Engineer

Chevron (MidContinent BU)

Location: Houston, Texas, USA

Responsibilities:

Evaluate, prepare & execute completion and workover projects in East TX, Panhandle TX, Kansas and Oklahoma.

Direct efforts to ensure engineering effectiveness of completion operations and that cross-functional project objectives are achieved

P&A program design, development and execution

Equipment forecasting and procurement

Vendor evaluation and selection

Material purchase

Manage look-back process

Monitor daily Workover rig operations

Develop program changes to support execution

Coordination of pre-rig work for rig scheduling and well category identification

Provide technical support for operated wells

Identify HSE considerations for operations and include in detail in written procedures

Assist in training/mentoring younger employees

2006, June – 2009, March

Operations Drilling Engineer

Tengizchevroil LLP (on loan to Chevron (MidContinent BU))

Location: Houston, Texas, USA

Responsibilities:

Drilling program design & execution in states of Colorado and Wyoming.

Project development and permitting

P&A program design, development & execution

Equipment forecasting and procurement

Vendor evaluation and selection

Material purchase

Manage look-back process

Monitor daily rig operations

Develop program changes to support execution

Coordination of pre-rig work for rig scheduling and well category identification

Provide technical support for operated wells

Identify HSE considerations for operations and include in detail in written procedures

Assist in training/mentoring younger employees

2006, January – 2006, June

Drill Site Manager

Tengizchevroil LLP (on loan to Chevron Offshore (Thailand) Ltd),

Location: Gulf of Thailand

Responsibilities:

Supervise on-site drilling / completion operations. Give work direction to various service personnel to accomplish objectives of the well work program.

Use various engineering tools to design and apply technical requirements of the well work program, including applied hydraulics, drill string design, well control calculations, tubing movement considerations, cement placement design, etc.

Manage drilling support inventory requirements and transportation of all equipment for on-site operations. Utilize company and contractor resources to ensure all equipment and material are procured and on location when needed.

Report daily operations and all associated supporting reports. Perform accounting functions for cost control and material / equipment management for each well.

Provide support and serve on project teams as required. Work with Engineers and Drilling Superintendent to identify and implement process improvements, including drilling optimization.

Contribute to maintain an incident free operation which is in support of and in compliance with Company Protecting People and the Environment policy. Responsible to lead and fully administer the safety program on-site including training assurance, safety meetings, assurance procedures, incident investigations, drills and preparation of all required reports.

2001, January – 2006, January

Drilling Representative

Tengizchevroil LLP

Location: Tengiz and Korolev fields, Kazakhstan

Responsibilities:

Supervise on-site drilling / completion / workover operations. Give work direction to various service personnel to accomplish objectives of the well work program.

Use various engineering tools to design and apply technical requirements of the well work program, including applied hydraulics, drill string design, well control calculations, tubing movement considerations, cement placement design, etc.

Manage drilling support inventory requirements and transportation of all equipment for on-site operations. Utilize company and contractor resources to ensure all equipment and material are procured and on location when needed.

Report daily operations and all associated supporting reports. Perform accounting functions for cost control and material / equipment management for each well.

Provide support and serve on project teams as required. Work with Engineers and Drilling Superintendent to identify and implement process improvements, including drilling optimization.

Contribute to maintain an incident free operation which is in support of and in compliance with Company Protecting People and the Environment policy. Responsible to lead and fully administer the safety program on-site including training assurance, safety meetings, assurance procedures, incident investigations, drills and preparation of all required reports.

2000, April –

2000, December

Operations Engineer

Texaco North Buzachi Inc.

Location: North Buzachi field, Kazakhstan

Responsibilities:

Work in various departments within Texaco North Buzachi and perform various functions related to the exploration, production and sales of oil

Work closely with all departments including SH&E, Drilling, Production, Finance, and Accounting

Work in Project permitting with Texaco management and the governmental agencies

Budgetary and production planning and forecasting

Drilling program approvals, design and execution

Coordination of Drilling and Well activities

Preparation of technical bids and evaluation of quotes

Facility permitting, design and installation

Project coordination within and outside Texaco

Collect and correlate technical data and prepare technical reports

1996, July – 2000, February

Deputy Director of Informational, Analytical & Marketing Center

Kazakh Scientific Research Geological Exploration Petroleum Institute (KazNIGRI)

Location: Atyrau, Kazakhstan

Responsibilities:

Direct and plan the activities of assigned personnel.

Perform supervisory functions.

Project management

Database development and maintenance

Participation in negotiations

1995, March – 1996, July

Lead Engineer

Informational, Analytical & Marketing Centre, KazNIGRI, Atyrau, Kazakhstan

Location: Atyrau, Kazakhstan

Responsibilities:

Direct and plan the activities of assigned personnel.

Perform supervisory functions

Database development and maintenance

Participation in projects

1994, March – 1995, March

1st Category Engineer

Laboratory of Drilling Mud, KazNIGRI, Atyrau, Kazakhstan

Location: Atyrau, Kazakhstan

Responsibilities:

Direct and plan the activities of assigned personnel. Perform supervisory functions.

Review and analyse work progress ensuring that the set procedures and programs are being executed efficiently. Anticipate work requirements and ensure that laboratory tests are done ahead of time.

Set and recommend specification and standards for mud additives. Perform necessary laboratory tests to confirm suitability of products for use in the Western Kazakhstan operations.

1993, June – 1994, March

Assistant to Driller

Atyrau Drilling Company, Atyrau, Kazakhstan

Location: Botakhan field

Responsibilities:

Assist the Driller in the day to day running of the rig, auxiliary equipment and personnel.

1992, September – 1993, January

Assistant to Driller

Mangystau Drilling Company, Eraliev, Kazakhstan

Location: Karachungul field

Responsibilities:

Assist the Driller in the day to day running of the rig, auxiliary equipment and personnel.

EDUCATION

1988 - 1994

Petroleum engineer

University of Oil and Gas, Atyrau, Kazakhstan

ADDITIONAL TRAINING AND COURSES

2021, May 24 – 28

IWCF Well Control Course – Level 4

2016, February 8 – 12

Managed Pressure Drilling Course

2011, April 26 - 28

K&M Technology – Horizontal & Extended Reach Drilling training course

2009, October 28 – 29

Halliburton Fracturing Customer School

2009, September 28 – 29

Smith Completions & Production Academy

2008, November 10 – 11

Decision Making and Cost Forecasting

2008, November 3 – 7

Managing Hole Problems

2007, November 15 - 16

Fishing and Sidetrack operations

Drilling Training Alliance, Houston, TX

2007, Oct 29 – Nov 2

Completion Design

DTA, Houston, TX

2002, September 10 - 12

Customer Drilling Seminar

Hughes Christensen Company, Houston, TX

2002, August 12 - 16

Coiled Tubing Best Practices

Drilling Training Alliance, Houston, TX

2002, August 5 – 9

Drilling Fluids

Drilling Training Alliance, Houston, TX

2002, July 22 – August 2

Drilling Practices

Drilling Training Alliance, Houston, TX

2002, July 15 – 19

Cementing: Primary / Remedial / Evaluation

Drilling Training Alliance, Houston, TX

2000, November 6 - 10

Artificial Lift Method Course

Rike Service, Inc.

1996, September – December

Advanced Drilling Management Course

Technology Research Center (TRC), Japan National Oil Corporation (JNOC), Chiba, Japan

SKILLS

Computer programs

MS Windows, MS Office, Wellview, OpenWells, Landmark EDT. Excellent computer skills.

Languages

Kazakh – native, Russian – excellent, English - fluent

REFERENCES

Name: Jorrit

Contact Number: +380 (50) 549 – 5854

Company worked together at: Halliburton

Name: Douglas Blaskowsky

Contact Number: +1-281-***-****

Company worked together at: Chevron

Name: Alejandro Djurisic

Contact Number: +1-713-***-****

Company worked together at: Chevron

Contact this candidate